Solved Upgrade windows 7 32 bit to 64bit without format?

[athlon54]

Hello

Recently I decided to upgrade RAM on my PC. Currently I have 2GB of RAM and I wanted to upgrade to at least 4GB, but I need 64bit OS to support that. So, can I upgrade win7 from 32bit to 64bit without format???

thanks for your help in advance

 

[AddRAM]

No, you can`t. You have to reinstall windows. It takes 15 minutes.

http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html

http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html

 

[athlon54]

thanks very much for your help
but if I format and use the 64bit one will all the drivers be installed and updated by windows7 64 bit? because I do not want to mess up with my system. And can I keep my files on partition D, or do I have to format all partitions???

 

[LMiller7]

The similar user interface tends to hide the fact that internally 32 bit and 64 bit operating systems are internally very different. Internally 32 bit Vista and 32 bit Windows 7 are more alike than 32 bit Windows 7 and 64 bit Windows 7. There has never been an upgrade path from a 32 bit to a 64 bit OS. The entire 32 bit OS, including all drivers, will be replaced by the 64 bit version.

The links provided by AddRAM provide detailed instructions of what you need to do.

You should always have a backup of all important files before any kind of an upgrade or installation of a new OS. If the files are of particular importance you should have 2 or more backup copies. Of course you should always have such a backup anyway. Data recovery after a problem arises is always a chancy thing.

 

[AddRAM]

Do not format the other partitions. Just format the partition you want to install windows on.

 

[gregrocker]

I would not change to 64 bit for only 4gb RAM. I still install 32 bit on most all my 4gb RAM installs. It tends to perform better.

The small amount of 4gb RAM not utilized by Win7 is normally reserved by hardware. You can check how much by typing Resource Monitor in Start Search box, clicking on Memory tab.

 

[AddRAM]

Ya just put the ram in, don`t change to 64 bit.

 

[BlackOwl]

I'd like to respectfully disagree with most of the naysayers above, and submit my (albeit very ugly) solution to the x86 -> x64 problem. This only works with desktops but a similar solution could be applied to laptops with a little more work.

Step 1: buy a new internal hard drive (preferably an SSD).
Step 2: remove all other hard drives and install the new drive. This will be your main/OS drive.
Step 3: clean-install x64 onto the new drive.
Step 4: boot up x64, install bare minimum of drivers etc. - this is unfortunately necessary.
Step 5: power off and replace your old HDD(s). You will need Windows to gain permanent access to this - a process that shouldn't take much time or effort.

This whole process might not keep your old settings, but with a few exceptions it should keep all your old files and programs (it kept mine with only trivial issues).

The beauty of this (from my point of view) is that it keeps x86 in case something goes wrong - just remove the new HDD and go back to your old config.

 

[crashnbuen]

You wont be able to do an upgrade, but given your goal - if you wish to save/ migrate a lot of things to the NEW Fresh Installed OS, there are steps you'll have to take.

 

[AddRAM]

I'd like to respectfully disagree with most of the naysayers above, and submit my (albeit very ugly) solution to the x86 -> x64 problem. This only works with desktops but a similar solution could be applied to laptops with a little more work.

Step 1: buy a new internal hard drive (preferably an SSD).
Step 2: remove all other hard drives and install the new drive. This will be your main/OS drive.
Step 3: clean-install x64 onto the new drive.
Step 4: boot up x64, install bare minimum of drivers etc. - this is unfortunately necessary.
Step 5: power off and replace your old HDD(s). You will need Windows to gain permanent access to this - a process that shouldn't take much time or effort.

This whole process might not keep your old settings, but with a few exceptions it should keep all your old files and programs (it kept mine with only trivial issues).

The beauty of this (from my point of view) is that it keeps x86 in case something goes wrong - just remove the new HDD and go back to your old config.

What are you disagreeing with, if you want 64 bit you have to install 64 bit, regardless if you use another drive or not. In the case of the OP going from 32 bit to 64 bit just because he`s going from 2 GB to 4 GB of ram, I wouldn`t even bother, he gains nothing, there`s no need to do it. The thread is well over a year old anyway, not even worth pulling up.

 

[newmikeman]

I'm in a similar situation. I've been running my laptop with Win7 32bit for a few years but now Adobe has dropped the 32bit version of Lightroom and the upgrade will only install on a 64bit OS, which is no problem for my main desktop system. As it happens I have got a second HDD in my laptop (in the DVD slot) and could perhaps follow BlackOwl's suggestion, but actually I think I'm blocked by the video adapter in my Lenovo T60p which I'm told only operates on a 32bit system. Any comments please? OK, maybe it means I have to buy a new laptop :-(

 

[AddRAM]

Double check on the video drivers at Lenovo.

 

[newmikeman]

Yes AddRAM I'm a D S 'cos I have been limping along with an ancient video driver, probably for years.
Now I have updated it I can even watch moovies without them being jerky.
I set up my alternative HD and installed Win7-64 on it, then the latest driver (actually a few years old), and wondrously it all seemed to work - at least as far as the display is concerned; I will return to normal working while I plan the upgrade properly. I still need to try out Sygnus21's method for getting my revered Nikon film scanner to play ball on 64bit.
Thanks for your help anyway.