Various BSOD error messages

[rmccarter01]

I have been getting various seemingly unrelated BSOD messages recently and was hoping someone would hopefully be able to help me.
I have ran memtest on my RAM and after 7 tests it showed up no errors
I have re-installed windows but still having issues since.

Hopefully someone can help,
Cheers in advance.

 

[richc46]

Welcome
We did not get the very important dmp reports, but if you have the same issue after reinstall its a hardware isssue.
You tested the memory,how about the hard drive?
Test Hard Drive
Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests

 

[rmccarter01]

How do I get you the dmp reports?
I have tried running the utility again and it doesn't output any dmp files.

Many Thanks

 

[richc46]

Make sure that you have the correct settings.
How to generate a kernel dump file or a complete memory dump file in Windows Server 2003

 

[rmccarter01]

Attached is the requested dmp files.
I have tested my harddrives and no issues showed up

 

[richc46]

OK, you did good with the reports. It usually takes more than a few dumps to get a definitive answer, but yours are pointing toward this driver. Update or remove the software. You may want to start with a System Restore point, before each software that you remove so that they can be reinstalled, if another cause is the actual problem
Myfault.sys file descriptionProductname:Sysinternals Myfault Description:Crash Test Driver Company:Sysinternals File size:Various

 

[rmccarter01]

I misunderstood the article that you originally posted, and that is the file that it said to use and it made the computer crash, after that i re-read and then realized what I had to do to create the dmp file.
So unfortunately Myfault.sys isn't the issue.

Thank you for your time so far

 

[richc46]

Your very welcome. If that is not the driver, we need to continue to test. We do not have enough reports, yet to make a definitive conclusion.

 

[rmccarter01]

Attached is the latest dmp file from a BSOD, I was running Chrome and Explorer but no other really intensive programs.

Thank you again.
I am about to run Drive Detective as well.

 

[richc46]

Hinted at a driver.
Use driver verifier
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable

 

[rmccarter01]

Here are various dumps from before I formatted my computer.
Hopefully they will help.

 

[richc46]

I need the dumps using the verifier. See my previous post.

 

[rmccarter01]

I ran verifier and was unable to reboot into windows without a BSOD, was able to boot into safemode.
Here are the reports

It was saying about hidclass.sys

 

[richc46]

Hidclass is a lead, microsoft driver and rarely the cause. Lets see if this trick works. Boot into clean boot and follow instructions.
http://www.sevenforums.com/tutorial...ation-conflicts-performing-clean-startup.html
Disable verifier.

 

[rmccarter01]

I will try this tomorrow, though am I to disable verifier before running your trick?

 

[richc46]

Yes disable verifier. If you still get BSODS in clean boot, we will have to go back to verifier.

 

[rmccarter01]

It BSOD while running in clean boot
Attached is the file

 

[richc46]

That files says nothing that can really help, except it points to driver again. See if you can get verifier to work.

 

[rmccarter01]

When I try to run verifier with clean boot, this is the BSOD I get.
There is no dmp file created as it doesn't get any further than this screen.

https://www.dropbox.com/s/jsxbxa4vpkp7e8k/2012-08-21 11.23.30.jpg

 

[richc46]

I think that I may have mislead you. When back in verifier, no clean boot. Clean boot must be run by itself.