Very long delay between Power on and Windows 7 Starts

EdLangton

New member
Local time
3:08 AM
Messages
2
I have just installed a new Clean Windows 7 Pro and managed to get past all the traps, Like only one disk may be in the machine or it will not allow new system partition etc.

However I have one left that I cannot work out.

When I power on the machine, bios passes all tests, screen goes blank and then there is a 5-10minute delay before windows starts loading?

Anyone seen this before and know what it is?

Its an Intel D945GTP board.

THanks for the advice in advance.

Ed
 

My Computer My Computer

At a glance

Windows 7 Pro
OS
Windows 7 Pro
Here might be a start.

Reboot and press F8 repeatedly before Windows starts. You should get a menu. Select "enable boot logging".

When the PC reboots successfully, look in C:\windows\ntbtlog.txt for what happened during your boot process. Post the log on this thread.

I'm not an expert on it by any means, but someone who is should be able to make sense of the log.
 

My Computer My Computer

At a glance

Windows 7 Home Premium SP1, 64-bitIntel Skylake i5-6600K, not overclocked8 GB HyperX DDR4-2666 (2 x 4 GB)none; graphics are integrated on CPU
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Ignatz Special; 4 speed manual gearbox; factory air conditioning; one of one
OS
Windows 7 Home Premium SP1, 64-bit
CPU
Intel Skylake i5-6600K, not overclocked
Motherboard
AsRock Z170M Extreme 4, micro ATX
Memory
8 GB HyperX DDR4-2666 (2 x 4 GB)
Graphics Card(s)
none; graphics are integrated on CPU
Sound Card
onboard: Realtek ALC1150; external: USB Behringer UF0-202
Monitor(s) Displays
Dell S2340M 23 inch IPS
Screen Resolution
1600 x 900
Hard Drives
System: Crucial MX100 series SSD, 128 GB;
Data: Samsung Spinpoint 103SJ, 1 TB;
Backup: WD Caviar Green WD30EZRX-00D8PB0, 3 TB
PSU
Rosewill SilentNight 500 watt fanless, semi-modular
Case
Antec Solo II
Cooling
Noctua NH-U12S; Noctua F12 intake, Noctua S12A exhaust
Keyboard
Microsoft 200 6JH-00001 USB
Mouse
Dell or Microsoft optical wired; USB
Antivirus
Microsoft Security Essentials and Malwarebytes Premium
Browser
Pale Moon
Other Info
All fans PWM; speeds at idle: CPU circa 500 rpm; intake circa 600 rpm; exhaust circa 600 rpm; CPU temps 27 idle and 47 C load in a warm room (27 C/81 F) when running Intel Extreme Tuning Utility stress test.
Hi Thnaks for the suggestion, but I see that the delay is long before the boot is even tried.

Once the BIOS check is complete, it just sits and waits for up too 10 minutes before trying to even boot.

Baffling to say the least. Restored my old XP image and it boots immediately.

Will have to look at BIOS settings I think?

Ed
 

My Computer My Computer

At a glance

Windows 7 Pro
OS
Windows 7 Pro
Try doing a Startup Repair. It sounds like boot loader problems.
 

My Computer My Computer

At a glance

Windows 7 Professional x64Intel i7 2600K OC'd @ 4620 MHz16GB GSkill Sniper 2133 Mhz (4x4GB)EVGA GeForce GTX 480 SuperClocked+
Computer Manufacturer/Model Number
Custom
OS
Windows 7 Professional x64
CPU
Intel i7 2600K OC'd @ 4620 MHz
Motherboard
Asus P8Z68-V Pro
Memory
16GB GSkill Sniper 2133 Mhz (4x4GB)
Graphics Card(s)
EVGA GeForce GTX 480 SuperClocked+
Sound Card
Realtek High Definition Audio
Monitor(s) Displays
2x Acer S273HLbmii 27"
Screen Resolution
2 x 1920x1080
Hard Drives
64GB Crucial M4 SSD

Storage: Hitachi 1TB 5400RPM, Samsung 1.5TB 5400RPM
PSU
Corsair HW Series 750w (modular)
Case
Cooler Master HAF 932 Advanced Blue Edition
Cooling
CM Hyper 212+ CPU cooler, 3x 230mm + 1x 140mm case fans
Keyboard
Logitech MK320 (wireless)
Mouse
Logitech MK320 (wireless)
Internet Speed
30 Mb/s : 2 Mb/s
Have you done your latest BIOS update?

Check your manufacturer's product downloads page or Intel's support downloads page for your mobo: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%c2%ae+945+Express+Chipset+Family+Boards&ProductProduct=Intel%c2%ae+Desktop+Board+D945GTP&OSVersion=OS+Independent
There are 13 BIOS updates for your board on Intel's site alone, latest 1/9/2009
But your manufacturer's updates should be given first priority.

If Startup repair doesn't repair boot issues, then consider doing a repair install which in Win7 is an Upgrade over itself run from desktop. It saves all programs, files and settings in place but replaces the OS and reconfigures the boot.
 
Back
Top