ppbrec1
New member
Hi,
Sorry if this has already been dealt with but I can not track down any posts on this topic.
Specifically, my Optical Drive is recognised in XP Mode but only to read data and not to write. Is this a limitation within XP Mode or is there likely to be some adjustment needed to my setup?
The full capability of the drive is recognised on the host computer and Nero burning software has been installed within the virtual environment.
Any thoughts / guidance would be appreciated.
Peter
Sorry if this has already been dealt with but I can not track down any posts on this topic.
Specifically, my Optical Drive is recognised in XP Mode but only to read data and not to write. Is this a limitation within XP Mode or is there likely to be some adjustment needed to my setup?
The full capability of the drive is recognised on the host computer and Nero burning software has been installed within the virtual environment.
Any thoughts / guidance would be appreciated.
Peter
My Computer
At a glance
Windows 7 Pro (64 bit), fully updatedIntel i5-25008Gb DDR3 10666/1333MhznVidia GeForce GT220
- Computer Manufacturer/Model Number
- Novatech (Custom build)
- OS
- Windows 7 Pro (64 bit), fully updated
- CPU
- Intel i5-2500
- Motherboard
- Asus P8P67-M
- Memory
- 8Gb DDR3 10666/1333Mhz
- Graphics Card(s)
- nVidia GeForce GT220
- Sound Card
- Soundblaster X-Fi Extreme (Music)
- Monitor(s) Displays
- HP ZR24w
- Hard Drives
- 1 x Crucial M500 480Gb SSD
2 x WD Caviar Black 640Gb 7200rpm 4.2ms SATA
2 x WD 200Gb SATA
- PSU
- Novatech 750W Silent ATX2 Modular
- Case
- Coolermaster Elite 330
- Cooling
- Front & rear case 120mm Akasa silent fans
- Keyboard
- Microsoft wireless Comfort 5000
- Mouse
- do
- Internet Speed
- Broadband (slow end)
