W7 Misidentify Native Resolution

[Soupie]

(If this has already been solved, please send me a link. Thanks!)

Okay, I've seen this problem discussed all over the Web in various forms.

My problem is that W7 is incorrectly identifying the native resolution of my 22" wide screen, 16:10 monitor.

I have a NVIDIA GeForce 9500 GT and a Sceptre X22WG-1080p 16:10 LCD with a high resolution of 1680 x 1050. It was running perfectly on Vista 64-bit. I upgraded to 64-bit W7, and W7 insists my native resolution is 1920 x 1080. I am using a DVI to DVI cable, the same I used with Vista. When I set the resolution to 1680 x 1050, which I can do through W7 settings, the screen shrinks and is bordered by black bars on either side.

I have the most up-to-date drivers from NVIDIA ( 191.07_desktop_win7_winvista_64bit_english_whql ), however this does not correct the problem. I've also used the NVIDIA control panel to change the resolution to 1680 x 1050, but I get the small screen with black bars on the sides.

I've manually installed the older Vista NVIDIA drivers, but this does not fix it either. I also tried uninstalling the monitor to see if W7 would find it and properly identify it.

Over on the the NVIDIA forums (which are down at the moment) they may have found a patch. You have to modify the .inf file in the driver setup files.

In order to do so, you have to write in the four hex numbers of your monitor EDID. I have my EDID information, but I'm not sure how to fid the hex numbers. Here's the info. Any help would be appreciated.

Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 470 x 300 mm (22.0 in)
Power management......... Active off/sleep
Extension blocs.......... None
-------------------------
DDC/CI................... Not supported

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.639 - Ry 0.326
Green chromaticity....... Gx 0.289 - Gy 0.598
Blue chromaticity........ Bx 0.147 - By 0.060
White point (default).... Wx 0.279 - Wy 0.289
Additional descriptors... None

Timing characteristics
Horizontal scan range.... 15-94kHz
Vertical scan range...... 24-77Hz
Video bandwidth.......... 170MHz
CVT standard............. Not supported
GTF standard............. Supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1920x1080p at 61Hz (16:10)
Modeline............... "1920x1080" 148.500 1920 2008 2096 2180 1080 1083 1089 1115 -hsync +vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 67Hz - Apple Mac II
640 x 480p at 72Hz - VESA
640 x 480p at 75Hz - VESA
800 x 600p at 56Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 72Hz - VESA
800 x 600p at 75Hz - VESA
832 x 624p at 75Hz - Apple Mac II
1024 x 768p at 60Hz - VESA
1024 x 768p at 70Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 870p at 75Hz - Apple Mac II
1152 x 864p at 60Hz - VESA STD
1280 x 720p at 60Hz - VESA STD
1280 x 800p at 60Hz - VESA STD
1280 x 960p at 60Hz - VESA STD
1280 x 1024p at 60Hz - VESA STD
1360 x 765p at 60Hz - VESA STD
1440 x 900p at 60Hz - VESA STD
1680 x 1050p at 60Hz - VESA STD

Report information
Date generated........... 10/30/2009
Software revision........ 2.41.0.818
Operating system......... 6.1.7600.2

Raw data
00,FF,FF,FF,FF,FF,FF,00,4E,14,01,22,D2,0B,00,00,12,11,01,03,81,2F,1E,78,2B,A0,D8,A3,53,4A,99,25,
0F,47,4A,BF,EF,80,71,40,81,C0,81,00,81,40,81,80,8B,C0,95,00,B3,00,02,3A,80,04,71,38,23,40,58,58,
36,00,DA,28,11,00,00,1C,00,00,00,FD,00,18,4D,0F,5E,11,00,0A,20,20,20,20,20,20,00,00,00,FC,00,53,
63,65,70,74,72,65,0A,20,20,20,20,20,00,00,00,FC,00,20,20,58,32,32,57,47,2D,31,30,38,30,50,00,1D

Any help or suggestions would be greatly appreciated. Thanks!

EDIT: Oh, but I should also say that I'm concerned that Monitor Asset manager says my native res is 1920x1080 as well. My 22" Sceptre definitely has a native of 1680x1050. What's going on here?

 

[thefabe]

Try reading this thread. Explination by Torrentg http://www.sevenforums.com/graphic-...ll-only-display-one-resolution-correctly.html. I hope this will help you. Welcome to seven forums. If this doesn't I will search again for you. Fabe

 

[Soupie]

Thanks for the link. Someone on here just posted new drivers for NVIDIA that are hot off the press. The W7 64-bit one worked perfectly for me!

TechConnect Magazine - Nvidia delivers the OpenCL-ready GeForce 195.39 beta driver

Hopefully everyone else experiencing NVIDIA/W7 widescreen problems will have the same results I did.

 

[TheSchaft]

Thanks for the link. Someone on here just posted new drivers for NVIDIA that are hot off the press. The W7 64-bit one worked perfectly for me!

TechConnect Magazine - Nvidia delivers the OpenCL-ready GeForce 195.39 beta driver

Hopefully everyone else experiencing NVIDIA/W7 widescreen problems will have the same results I did.

Thanks for posting your solution, Soupie - hopefully it will help other folks who have the same issues.

P.S. - Welcome to Seven Forums

 

[Tenaciousv]

I have the same monitor and an nvidia 9800gtx GC and cant get my native resolution either. I have tried the link to the beta drivers but it doesnt seem to work. is there another location to get those drivers?

 

[torrentg]

download from Guru3D.com

 

[Matt1974]

Ok i have a similar problem ..My problem is i cant get to my native resolution of 1680x1050 using DVI (My pc was running fine, best system ive ever seen to be honest but my Hard drive died so i replaced it and re installed Win 7 rc 64bit and now cant get past 1280x720 in screen resolution options)..Installed all drivers and updated all to my knowledge ...tried multiple drivers from Nvidia and the best i get is 1280x720...Tried powerstrip as a fix and no good(Be warned the powerstrip program can cause major headaches to the point ur monitor wont work)..installed the latest drivers from guru and still the same problem ...Im seriously out of ideas on how to fix this ...

Im using gforce 8600gt on 22" viewsonic LCD..also it comes up with some Generic monitor non pnp ..Im at a lost and extremely fraustrated with this ..any help would be so muchly appreciated.. Extremly sad now due to the Fact my Pc was Running so well with basically everything running so damn sweet with the win 7 os ....

all i can ask is please if there is a fix for this particular problem post how to do so ..
Thx for your time

 

[torrentg]

Check device manager for the driver date/version of video card. Which is it?

Why can't you select 1680x1050? Is it missing or what is stopping you?

 

[Matt1974]

Check device manager for the driver date/version of video card. Which is it?

Why can't you select 1680x1050? Is it missing or what is stopping you?

Driver date: 10/27/2009
Driver Version: 8.17.11.9539

Now what happens is the the slider to set resolution is only going as far 1280x720 ...dont know why


---------------
Display Devices
---------------
Card name: NVIDIA GeForce 8600 GT
Manufacturer: NVIDIA
Chip type: GeForce 8600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_050E10DE&REV_A1
Display Memory: 1776 MB
Dedicated Memory: 497 MB
Shared Memory: 1279 MB
Current Mode: 1280 x 720 (32 bit) (59Hz)
Monitor Name: Generic Non-PnP Monitor
Monitor Model: unknown
Monitor Id:
Native Mode: unknown
Output Type: DVI
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 8.17.0011.9539 (English)
Driver Version: 8.17.11.9539
DDI Version: 10
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 10/28/2009 15:41:36, 11769960 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B71E3E-4742-11CF-2D56-05251FC2C535}
Vendor ID: 0x10DE
Device ID: 0x0402
SubSys ID: 0x050E10DE
Revision ID: 0x00A1
Driver Strong Name: oem18.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section003:8.17.11.9539ci\ven_10de&dev_0402
Rank Of Driver: 80E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C

 

[torrentg]

Try changing the refresh rate to 60 Hz first in advanced settings, monitor tab. Then see if higher resolutions are available.

If you are still having problems, check out solution somewhere in the middle of this thread.

 

[Matt1974]

No joy ...Have similar problems with not being able to change to 60hz aswell as stated in the above thread link ...Goes thru the process and then prompts if i wanna keep these settings and click yes but when i check it again its back at 59hz ...

 

[Matt1974]

Not really bothered with the 59hz bug as it worked fine on 59hz at 1680x1050 ...All i want is for that resolution to be obtained again ..Old problems months ago is that when ever new updates came out it would actually end up saying no digital signal ..But back to my original and only problems i just want to set my lcd monitor 1680x1050 (native) its a massive problem and there must be answers to it surely ..

 

[torrentg]

Try to locate the driver for the monitor with Windows Update or here. Install.

 

[Matt1974]

---------------
Display Devices
---------------
Card name: NVIDIA GeForce 8600 GT
Manufacturer: NVIDIA
Chip type: GeForce 8600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_050E10DE&REV_A1
Display Memory: 1776 MB
Dedicated Memory: 497 MB
Shared Memory: 1279 MB
Current Mode: 1680 x 1050 (32 bit) (59Hz)
Monitor Name: ViewSonic VX2245wm
Monitor Model: VX2245wm
Monitor Id: VSCBB1E
Native Mode: 1680 x 1050(p) (59.954Hz)
Output Type: HD15
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 8.16.0011.9107 (English)
Driver Version: 8.16.11.9107
DDI Version: 10
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 9/27/2009 23:12:22, 9441384 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B71E3E-4742-11CF-FD50-05251EC2C535}
Vendor ID: 0x10DE
Device ID: 0x0402
SubSys ID: 0x050E10DE
Revision ID: 0x00A1
Driver Strong Name: oem21.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section003:8.16.11.9107ci\ven_10de&dev_0402
Rank Of Driver: 00E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C


Now this dxdiag i assume is the analog readout

Display Devices
---------------
Card name: NVIDIA GeForce 8600 GT
Manufacturer: NVIDIA
Chip type: GeForce 8600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0402&SUBSYS_050E10DE&REV_A1
Display Memory: 1776 MB
Dedicated Memory: 497 MB
Shared Memory: 1279 MB
Current Mode: 1280 x 720 (32 bit) (59Hz)
Monitor Name: ViewSonic VX2245wm
Monitor Model: unknown
Monitor Id:
Native Mode: unknown
Output Type: DVI
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 8.16.0011.9107 (English)
Driver Version: 8.16.11.9107
DDI Version: 10
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 9/27/2009 23:12:22, 9441384 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B71E3E-4742-11CF-FD50-05251EC2C535}
Vendor ID: 0x10DE
Device ID: 0x0402
SubSys ID: 0x050E10DE
Revision ID: 0x00A1
Driver Strong Name: oem21.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section003:8.16.11.9107ci\ven_10de&dev_0402
Rank Of Driver: 00E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C

this i assume is the digital (DVI) ...

manually install Viewsonic drivers ...


What i notice is that in DVI mode the native is unknown..(maybe where the problem lies)..

(Attempted this with just the drivers that came with Win 7)
Also when i try to install via windows update it fails ...it does have options to update Nvidia and Viewsonic but fails when i try
Also really appreciate the help on this matter its been awesome..

 

[Frostmourne]

Can you manually install the newest viewsonic drivers? Can you try a different input?

 

[Matt1974]

i can manually install Viewsonic drivers which ive done ...Now for input i only have the one card with Vga and Dvi both connected to monitor ...

Vga/analog sees the native resolution without problems ..Its the DVI/digital that wont go past 1280x720 .. im wanting to obtain my native res 1680x1050 on DVI

 

[Matt1974]

Decided to sit on this for awhile ..basically ill be waiting for the drivers to come out that fix this ..if it dosent means ill have to get a new card ...Seems to be the norm that Drivers only update for a year or two then ur Forced into upgrade if your using the net ..Cheeky marketing ..But i do aprreciate the response and attempts to solve my problem ..Cant win them all ...nvm ....Thx for the help ....

P.s notice advertising linked to my posts that where put there without my permission ...PLEASE dont do this as i thought this was a legitimate Win 7 forum.. If u need to advertise use banners or something else ...