Win 7 doesn't start

[vhzvbo]

Hi , I installed win 7 in my lenovo t61 thinkPad previously and it was not working fine, when i tried to open any folder, i had to wait several minutes and something my laptop crashed.

now i can not log in into my laptop. there is a messege saying

windows fail to start . a recent hardware or software change might be the cause. to fix the problem

1 insert your win installation
2 choose your language settings.
click repair your computer.

other options

if power was interrupted during start up choose start windows normally.

safe mode
safe mode with networking
safe mode with mpmmand prompt
last know good configuration
start wind normally

I tried all options above but there is a fast message on screen (1 sec duration).

a problem has been detected and windows ...... shut down your computer.

file_boot_volume
if is the first time you've seen this stop error ..... your computer
....
.....

technical information :

stop: 0x00000ed (0x84b5c3f8,0x000000185, 0x00000000, 0x00000000)

now i'm trying to re-install win 7 or log in but it can't do neither of them .

I really need help with this please

if there is any way to install win 7 or any other dos...

thanks in advance for your help......

 

[zigzag3143]

vhzvbo

Can you boot in safe mode? did you make a backup you can restore from? Did you try a repair install? Could you also fill in your system specs (lower left corner of your post so we know what hardware you have.

Ken

 

[TGSoldier]

What happens when you insert your win 7 dvd and boot from it?

That's when you get the file_boot_volume error?

 

[vhzvbo]

vhzvbo

Can you boot in safe mode? did you make a backup you can restore from? Did you try a repair install? Could you also fill in your system specs (lower left corner of your post so we know what hardware you have.

Ken

Hi Ken,

I can’t boot at all, i tried all . safe mode, normal, etc and neither made any restore dvd. I tried to repair it, re install from scratch but nothing works.
I have an HITACHI HTS722010K9SA00
I can’t see any other hardware details..

 

[TGSoldier]

You ignored my question but I'll take that as a yes

Do you have any other hdd's u can try the installation on?

 

[vhzvbo]

What happens when you insert your win 7 dvd and boot from it?

That's when you get the file_boot_volume error?

yes ,

fast message on screen (1 sec duration).

a problem has been detected and windows ...... shut down your computer.

file_boot_volume
if is the first time you've seen this stop error ..... your computer
....
.....

technical information :

stop: 0x00000ed (0x84b5c3f8,0x000000185, 0x00000000, 0x00000000)

 

[zigzag3143]

Ok can you boot into bios? its usuall a function key (F-12?). If you boot with the win 7 install dvd in does it boot from it?

Ken

 

[vhzvbo]

You ignored my question but I'll take that as a yes

Do you have any other hdd's u can try the installation on?

I have an external hard drive.

 

[vhzvbo]

I have an external hard drive.

i run a hard disk drive diagnostics from the bios and i have a message.
error code 0000: read verification failed

 

[vhzvbo]

Ok can you boot into bios? its usuall a function key (F-12?). If you boot with the win 7 install dvd in does it boot from it?

Ken

it does boot from the bios but it stops installing after 2 minutes,

 

[zigzag3143]

it does boot from the bios but it stops installing after 2 minutes,

Try booting into bios without the win 7 dvd in. In bios check the acpi settings if you have them. also check for legacy floppy support (would be unchecked).

Lets talk abt your win 7 dvd. where did you download it from and how did you burn it?

Ken