Solved Windows 7 Bootmgr missing

[Mufasil]

Dear:
My desktop is giving this message when i install windows 7 on it after completing copying process window restart and this message show:
"Found New Software/Hardware..................
windows\system32\winload.exe
"
this message show and i have see many forums and blogs they says that repair your computer by pressing F8 when i press F8 the message show
"BootMGR is missing or curropt windows cant be load."
i have tried many thing i alse try to repair my computer by windows 7 cd there is no changes appears,
i also tried softwares to solve like EBCD,Wondershare LiveBoot etc .
but nothing happens.

here is one more thing at every boot the message is change some time i get this winload.exe message some this i get windows/system32/ntoskrnl.exe,.....etc.
what is the solution for this...

My PC Information:
ManufacturareELL
MODEL:GX755

 

[Dsprague]

Have a look at this tutorial and see if it helps: http://www.sevenforums.com/tutorials/104341-bootmgr-missing-fix.html

 

[Mufasil]

i have did this but no changes appears.
same thing happens

 

[VistaKing]

Hi Musfasil

Welcome to SevenForums . Take a look at this link below

:ar: http://www.sevenforums.com/tutorials/104341-bootmgr-missing-fix.html

Dsprague beat me to it.

Try to reinstall Windows using this link below . Follow it exactly and you should be good

:ar: http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html

 

[Mufasil]

i have did this but nothing happens

 

[VistaKing]

Are you using USB to install Windows ? Take a look below on how to create a bootable USB drive with windows 7

:ar: http://www.sevenforums.com/tutorial...dvd-download-tool.html?filter[2]=General Tips

 

[Mufasil]

@VistaKing:
i have also did clean installation as you tell me but same thing happens.is their any other way to solve this.

 

[VistaKing]

@Mufasil

Lets wipe the hard drive and start from scratch . Put in the cd or USB drive into the computer . On the Dell Splash screen press F12 and choose the device optical drive or USB device . Press enter when you see the screen that says Press any key to boot from cd or DVD…( image below )

When you get to this screen ( image below )

Press Shift and F10 . You will get a command prompt window . It should open up to X:\Sources . In there input these commands and press enter after each line .

DISKPART
LIST DISK
SELECT DISK 0
CLEAN
CREATE PRIMARY PARTITION 
SELECT PARTITION 1 
ACTIVE 
FORMAT FS=NTFS LABEL="Windows" QUICK 
ASSIGN LETTER=C
 EXIT
 EXIT

Back on the image above press Install Now . Check the I accept the license terms box and click on Next. Click on the Custom (advanced) option. Then choose
Disk 0 Partition 1: Window (C:\) and click Next

   Note

When it reboots don't press any keys it will continue on its own

 

[gregrocker]

Hold on. Perhaps we should at least try to fix Win7 before reinstalling it?

First reboot and tap the Dell F12 key to run Hardware diagnostics. It will test your hardware so you'll know if it is the problem. Dell Diagnostics Utility - How to Run the

If not, reboot into the Win7 DVD or (if you have it) System Repair Disk. The WIn7 DVD for your licensed version can be found in Step 6 of Troubleshooting Windows 7 Failure to Start, along with the tool to burn it to DVD or write it to bootable flash stick.

Reboot and again tap the F12 key to select DVD or flash stick to boot, boot into System Recovery Options to
run Startup Repair repeatedly. Report back what it finds.

If Win7 cannot be found of it won't discover the HD, reboot into BIOS setup using the Dell F1 or F2 key, make sure the HD is detected under Storage Devices. If not reinstall or replace it.

The Troubleshooting steps also provide everything that can be done to repair Win7, leading up to if necessary rescuiing your files to run Dell Windows 7 PC Restore or doing the superior Clean Reinstall - Factory OEM Windows 7

 

[Mufasil]

@VistaKing:
i have did what you say but after reboot i cant press any key the error come windows/system32/winload.exe is corrupt.
Error:the file checksum didn't match with your computed checksum.

 

[VistaKing]

Try this

You may try to rebuild the ‘Boot Configuration Data’ or fix ‘Boot manager’. To do so, refer the following steps:
a) Put the Windows 7 installation disc in the disc drive, and then start the computer.
b) Press a key when you are prompted.
c) Select a language, a time, a currency, a keyboard or an input method, and then click ‘Next’.
d) Click Repair your computer.
e) Click the operating system that you want to repair, and then click ‘Next’.
f) In the System Recovery Options dialog box, click Command Prompt.
g) Type BOOTREC /REBUILDBCD and press enter; check if it resolves the issue.
h) If the issue persists then repeat steps ‘a’ to ‘f’ and type BOOTREC /FIXBOOT and press enter; and check the status.

   Note

To start the computer from the Windows 7 DVD, the computer must be configured to start from the DVD drive.

 

[Mufasil]

@VistaKing:I have tried many time but same error comes please tell me any other way please is their any software etc which solves this problem autometically or any other thing please tell me
Thanks

 

[x BlueRobot]

Have you looked at Greg's suggestion?

 

[Mufasil]

@x BlueRobot i also did Greg's suggestion but nothing happen same error comes.

 

[x BlueRobot]

Please post the results of each step you have taken.

 

[Mufasil]

@VistaKing After doing your steps new error come this
"
OBJECT GUID: {9dea862c-5cdd-4e70-acc1-f32b344d4795}
Status:0xc0000034
Info:The configuration for an element within the object is invalid in the boot configuration boot store.
"

 

[Mufasil]

@x BlueRobot: I have did yesterday i didn't have any pics i have did following steps:
1.First i reboot my pc
2.Press F12
3.Select Diagnostic
4.it will check memory and tell me everything is ok.

but same error comming....

 

[gregrocker]

I gave you a whole list of steps to perform of which that was only one.

If you're not going to be any more thorough than this then you can forget about getting it fixed.

You need to perform every single step and report back on each so we can help you if you can't get them done.

Why would you ask for help and be so sloppy, disregarding steps like that? Troubleshooting requires absolute thoroughness.

 

[Mufasil]

@gregrocker:
i have did every step when i diagnose the system using dell diagnostic utility during diagnosing error accours:
Error Code:0F00:1348
MSG DISK:BLOCK 290687 DRIVE DID NOT COMPLETE COMMAND UPDATE FIREWARE.

 

[Mufasil]

@gregrockerURING THIS PROCESS ANOTHER ERROR ACCURS
ERROR CODE:0F00:1328