I am trying to install windows 7 Ultimate 32bit on my computer and it fails. I had some trouble getting the installation disk to boot. i kept getting a BSOD error 0x0000000a. I was able to get around this error by removing one stick of ram (i have 3 x 1GB kingston DDR PC3200).
I selected the 40GB IDE drive to install windows to (couldn't get it to recognize my SATA controller). I was able to format the drive and copy file. Then the computer rebooted. When windows tries to boot I get the BSOD and then the computer reboots. I'm not able to see what is causing the error. if I select safe mode boot it boots up to the installer. there I get an error can't continue setup in safe mode please reboot.
I selected the 40GB IDE drive to install windows to (couldn't get it to recognize my SATA controller). I was able to format the drive and copy file. Then the computer rebooted. When windows tries to boot I get the BSOD and then the computer reboots. I'm not able to see what is causing the error. if I select safe mode boot it boots up to the installer. there I get an error can't continue setup in safe mode please reboot.
My Computer
- Computer Manufacturer/Model Number
- DFI LanParty NFII Ultra B
- OS
- Windows 7
- CPU
- Athlon 3200+ (Barton core)
- Motherboard
- DFI LanParty NFII Ultra B
- Memory
- 3GB RAM, currently 2GB installed
- Graphics Card(s)
- Evga Gforce 6200 256MB Ram
- Sound Card
- Creative X-Fi fat1lty edition
- Monitor(s) Displays
- Hyundi 191 19"widescreen 1440x900 native resolution
- Hard Drives
- 40GB IDE (Primary Master) 80 pin cable
Pioneer DVR110 (Primary Slave) 80
80GB Western Digital, SATA0 (SiI 3114 R Legacy, 5.0.73 bios)
120GB Seagate SATA1 (SiI 3114 R Legacy, 5.0.73 bios)
- PSU
- 350 Watt (came with case don't know model)
- Case
- don't know
- Cooling
- Thermaltake heatsink and fan (don't remember model)
