Windows 7 Problems

ALPH4

New member
Local time
4:54 PM
Messages
8
I just finished upgrading my comp from XP to Windows 7 and it has not gone smoothly.
- The boot up is extremely slow (15 - 20 mins) Possibly due to the fact that I am using a IDE hard drive?? And no AVG is not installed.

- I cannot install my Nvidia graphics drivers, I just get a message saying "Setup has detected that the operating system in use is not Windows Vista [32-bit]/Windows 7 [32-bit]....... But I am running Windows 7 32-bit :confused:

- My razer mouse side buttons no longer work even though I installed the proper Windows 7 drivers. It worked on XP though.

What do I doooo????
 

My Computer

OS
Windows 7
CPU
AMD Athlon 64 X2 Dual
Motherboard
ASUS M2A-VM
Memory
3GB
Graphics Card(s)
NVIDIA GeForce 9800 GTX+
Hard Drives
Maxtor 6Y080L0 ATA Device (OS drive)
Hitachi HDS721010KLA330 ATA Device (Storage)
Look at Computer>Properties to make sure you installed 32 bit.

Almost all drivers in the installer are current, especially Graphics. MS funded the WHQL (Windows Hardware Quality Labs) which developed these drivers in partnership with the manufacturers and has them to release even sooner sometimes.

If it doesn't come in the installer, it will soon follow in Windows Updates.

Your mouse may need special software for those buttons to run. Look on the manufacturer's product page for that exact model to see what it has for Win7.

Type into the start/run box "msconfig" and look at the startup tab to see what is hitchhiking on your startup. I uncheck everything except MS entries.
 
Well I typed in msconfig and disabled all my Microsoft services, as well disabled the Load startup items check box. Yet, no improvement at all :huh:

Any other suggestions???
 

My Computer

OS
Windows 7
CPU
AMD Athlon 64 X2 Dual
Motherboard
ASUS M2A-VM
Memory
3GB
Graphics Card(s)
NVIDIA GeForce 9800 GTX+
Hard Drives
Maxtor 6Y080L0 ATA Device (OS drive)
Hitachi HDS721010KLA330 ATA Device (Storage)
Run the Win7 installer from your desktop to do a Repair install which saves programs, files and settings but reinstalls the OS underneath and settles boot issues.

In Win7 a Repair install is an Upgrade over itself.

Afterward you will need to reactivate at Computer>Properties.
 
I just finished upgrading my comp from XP to Windows 7 and it has not gone smoothly.
- The boot up is extremely slow (15 - 20 mins) Possibly due to the fact that I am using a IDE hard drive?? And no AVG is not installed.

- I cannot install my Nvidia graphics drivers, I just get a message saying "Setup has detected that the operating system in use is not Windows Vista [32-bit]/Windows 7 [32-bit]....... But I am running Windows 7 32-bit :confused:

- My razer mouse side buttons no longer work even though I installed the proper Windows 7 drivers. It worked on XP though.

What do I doooo????

Check Windows 7 Log Events if there are any conflicts, also press WIN+Pause and check device manager, if there are any red/yellow notifications.
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Self Built
OS
Windows 7 Home Premium x32 SP1
CPU
x2 2.6 GHz
Motherboard
Asus
Memory
A-Data 2GB DDR2-800
Graphics Card(s)
ATI X1250
Sound Card
SB 5.1 Live!
Hard Drives
WD and Seagate FAP
PSU
Tagan TG-480-U01
Keyboard
BTC 6300
Mouse
Logitech VX Nano
Antivirus
None
how do I view my event log?

I just check my Device Manager and theres a yellow notification for:

PCI Standard PCI-to-PCI bridge

Device status:
This device cannot find enough free resources that it can use. (Code 12)

If you want to use this device, you will need to disable one of the other devices on this system.

Mouse problem has been already fixed, now its just the 8 min boot up and nvidia drivers problem :(
 

My Computer

OS
Windows 7
CPU
AMD Athlon 64 X2 Dual
Motherboard
ASUS M2A-VM
Memory
3GB
Graphics Card(s)
NVIDIA GeForce 9800 GTX+
Hard Drives
Maxtor 6Y080L0 ATA Device (OS drive)
Hitachi HDS721010KLA330 ATA Device (Storage)
There seems to be major installation problems where the OS doesn't even recognize it is 32 bit, plus the PCI bridge device error. I personally would do a repair install to give it another shot at installation to see if it overcomes these problems.

However, if you have some reason you don't want to do a repair install, then the next best thing is to run "sfc /scannow" which will check the integrity of all of the system files.

Finally, if you purchased Win7 retail you are entitled to MS excellent tech support which I have found is often worth more than the price of the purchase. They will know what these errors mean.
 
Back
Top