Windows 7 StartUp simple guestion

[Martin7R]

Hello everyone - I'm new here

Today my guestion look like this:
When I start up Windows, it is loading and when I reach that point it says "welcome" and loads in background, after that Desktop must show up immediately, but instead of this , after welcome screen it turns black(and mouse pointer can be seen) like loading something and then after 3-4 secs the desktop shows up.

How to fix that ?

I have disabled all unneeded programs and startups.

I have made a lil' comics about that for better imagination.
1)>>>> http://www.megaleecher.net/uploads/w7-welcome.jpg
2)>>>> http://www.recipester.org/images/1/10/Green_Storm_Fill_Black_Color.jpg
3)>>>> http://www.madboxpc.com/wp-content/uploads/2009/10/Windows7Ultimate_desktop.png

Thanks in advance

 

[unifex]

Welcome to the Forums!

Look for possible errors in the Event Viewer (Start -> Administrative Tools -> Even Viewer). This will tell you whether there are any issues that appear at start-up. This black screen might be an indication of a faulty driver or some unrecognized hardware. This can also be seen in the Device Manager (Control Panel -> Device Manager) as a big yellow question mark in the list of devices.

 

[soup2511]

I have the same issue but I am really not sure if it is serious. ....

 

[mitchell65]

Hi Martin and welcome to the Forum.
Unless I have got it wrong I would say that what you are seeing is quite normal. What exactly do you expect to happen that doesn't at he moment? Not sure what you mean by

"after that Desktop must show up immediately"

 

[Martin7R]

Hi Martin and welcome to the Forum.
Unless I have got it wrong I would say that what you are seeing is quite normal. What exactly do you expect to happen that doesn't at he moment? Not sure what you mean by

"after that Desktop must show up immediately"

Like when Welcome screen Fades-Out, then normally Desktop will Fade in, <<Like smooth and fast .
It didn't hold the black screen usually - that's why i am lil' worried

 

[Martin7R]

I found some issues with Administrative tools for example

"Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 23.02.2011 14:37:20
Event ID: 315
...
</Event>"


How to erase these kind of problems?

 

[Martin7R]

Okay I just made a Reboot (70 seconds) and the error I found at Events was the same:
"Failed to Share printer blabla"

Okay how to fix this ?

 

[mitchell65]

So are you on a network?

 

[unifex]

That might in fact contribute to the delay between your welcome screen and the desktop. To solve this problem you can uninstall the printer in question, I mean completely uninstall (go to Start -> Devices and Printers, choose the printer and delete it). Then reboot a couple of times and see if there is any difference.

Now, do you actually want to share this printer? Do you actually have a Microsoft network set up with other computers that need to use shared resources? If not, than I would recommend disabling all sharing, there is no need to share if you have just one computer. If you do want to share, then you need to take a closer look at your set-up and see what went wrong there. As an interim solution just uninstalling and then re-installing the printer might actually help.

 

[Martin7R]

Okay I Removed This Device , I am using it on laptop anyway.So I restarted PC for 3 times and there is result, there is no errors in events at startup.
And that screen isnt so long 4 secs.Now it's about 3/4 or 1 seconds.

What can I do more to make it even better, ??

Thank you all for instant help

 

[unifex]

I would say, that if you don't have any errors then it's OK. I just fired up my laptop and there is a brief, probably less than a sec, black screen between the welcome screen and the desktop. I guess depending on your processor power and what not this may be slightly longer or shorter. If this is a laptop, then I'd guess there should not be any unrecognized hardware. So, I would leave this at that. If you're totally annoyed by it, you can try Classic Theme, it's possible that it takes some time to load Aero, but I would not worry about it myself. Of course, if you're running any custom themes, those might take a while to load, depending on theme complexity.

 

[gregrocker]

It's normal in some installs. Keep monitoring your Event Viewer for repeat errrors to google for solution.

If you want to learn a lot about startup, run a boot trace and study the map: http://www.msfn.org/board/topic/140247-trace-windows-7-bootshutdownhibernatestandbyresume-issues/

Other Win7 troubleshooting steps

 

[Martin7R]

I would say, that if you don't have any errors then it's OK. I just fired up my laptop and there is a brief, probably less than a sec, black screen between the welcome screen and the desktop. I guess depending on your processor power and what not this may be slightly longer or shorter. If this is a laptop, then I'd guess there should not be any unrecognized hardware. So, I would leave this at that. If you're totally annoyed by it, you can try Classic Theme, it's possible that it takes some time to load Aero, but I would not worry about it myself. Of course, if you're running any custom themes, those might take a while to load, depending on theme complexity.

No its my DeskTop and you can check my system below .It has all new powerful parts.

Quote gregrocker:

I keep Receveing overtime an error "Security SPP has the following error: Acces Denied.
sppunotify has failed to start." in Event Viewer

 

[gregrocker]

How did you activate Win7?

Are you connecting to the internet?

 

[Martin7R]

I went to service they activated my windows 7 and yes I have internet connection.

 

[mitchell65]

I think gregrocker meant "How do you connect to the internet? USB Modem? Modem/Router?

 

[Martin7R]

I think gregrocker meant "How do you connect to the internet? USB Modem? Modem/Router?

Router

 

[gregrocker]

What service activated Win7? Did you insert the Product Key?

What does it say under Activation at Computer>Properties?

 

[Martin7R]

What service activated Win7? Did you insert the Product Key?

What does it say under Activation at Computer>Properties?

eem , i cant see any information about activation there ...The last information table is "Computer name, domain settings"

I went to PC service and they have installed the new windows in to my PC.

 

[gregrocker]

You'll need to scroll down to bottom of Properties page.