Solved Windows 7 Ultimate crashing - ntoskrnl.exe

[enrique936]

Hi, I've been recently having some issues on a fresh installed version of Windows 7 Ultimate, I've gotten BSOD such as
SYSTEM_SERVICE_EXCEPTION
PAGE_FAULT_IN_NONPAGED_AREA
IRQL_NOT_LESS_OR_EQUAL

and some STOP errors like 0x00000109

and I can't seem to find the solution, I've already ran memtest86 for 10 hours and no errors in my RAM, and I don't know what to do next.
Thanks in advance!

I upload the required files here:

 

[Arc]

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

[COLOR=Red]Windows 7 Kernel Version 7600 MP [/COLOR](8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532

Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

Klif Mini-Filter fre_wnet_x86 (Kaspersky) is causing the BSODs there.

fffff880`0d32b678  fffff880`03282ed4Unable to load image [URL="http://www.carrona.org/drivers/driver.php?id=klif.sys"]klif.sys[/URL], Win32 error 0n2
*** WARNING: Unable to verify timestamp for [URL="http://www.carrona.org/drivers/driver.php?id=klif.sys"]klif.sys[/URL]
*** ERROR: Module load completed but symbols could not be loaded for[URL="http://www.carrona.org/drivers/driver.php?id=klif.sys"] klif.sys[/URL]
 klif+0x7bed4

Description here: http://www.carrona.org/drivers/driver.php?id=klif.sys

Uninstall Kaspersky using Kaspersky Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.

1. Click on the Start button
2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
3. Select the “Startup” tab.
4. Deselect all items other than the antivirus and the touchpad driver, SynTPEnh.
5. Apply > OK
6. Accept then restart.

Make it sure that your Crucial M4-CT128M4SSD3 is running with the updated firmware.
http://www.crucial.com/support/firmware.aspx

Let us know the results.
______________________________________________________________________________
BSOD ANALYSIS:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff800027c8c20, 8, fffff800027c8c20, 0}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+41db7 )

Followup: MachineOwner
---------
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff80002f6e208, fffff8800d125e30, 0}

Probably caused by : memory_corruption

Followup: memory_corruption
---------

 

[enrique936]

Hello again! I've done everything you suggested, except for the antivirus scan, because I get BSOD saying "page fault in nonpaged area" when scanning, also, when doing all of these steps, I've got blue screen several times, like 9 or 10 times, sometimes even when windows was starting with STOP errors like 0x00000109 and others
The malware scan deleted 8 malwares but that didn't change much, I've still got blue screens every 10 or 20 minutes

I attach the new dump files here:

 

[enrique936]

Also, I wasn't able to check for an update for the SSD, is it possible to do that in safe mode? I don't to brick mi SSD by getting a BSOD while updating the firmware

 

[enrique936]

I've updated the SSD firmware but I'm not sure if I've done it correctly, is there a way to check that?

 

[YoYo155]

My bet is on the latest nVidia driver (320.18) it's buggy.
I would revert back to 314.22 and see how things go from there.

 

[enrique936]

I'll try that now and see what happens, thanks!

 

[enrique936]

In the list of supported devices it doesn't list the 650m which is the one that I have, you think it will work anyway?

 

[YoYo155]

No, wait I'll have a look.

 

[YoYo155]

Drivers | GeForce

View attachment 270599

Is that the one?

 

[enrique936]

that wasn't the one that I saw, I'll try it now to see what happens, thanks!

 

[enrique936]

I've installed the oldest driver but still got the same blue screen after 10 minutes of use, so I'm back to square one

 

[YoYo155]

Can you upload the new dump?

 

[enrique936]

sure, here it is:

 

[YoYo155]

Run Memtest86+ and post back with the results.

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

 

[enrique936]

I've already ran memtest yesterday, but I'm gonna let it testing all night and tomorrow will post the results

 

[Arc]

I am guessing the system is still infected.

fffff880`0f487508  fffff880`0107e591 ataport!IdeProcessPortNotification+0x16d
fffff880`0f487608  fffff880`0107af00 ataport!IdeStartCrbSynchronized+0x2c

Have you run TDSSKiller already? Try it one more time. If still the situation is the same, go for a http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html.

 

[enrique936]

When I finish the memtest I will run TDSSkiller, I already ran the other anti-malware and it deleted 8 infected files, if the TDSSkiller doesn't work, I'll do a factory OEM and post the results here, thanks!

 

[enrique936]

The TDSSkiller didn't found anything, so I guess the next step will be a clean install, I'll start now and post the results in a moment

 

[enrique936]

so, I did a clean reinstall, only this time I installed windows 7 professional, while performing windows update I got blue screen twice, both saying "page fault in nonpaged area", the third time it updated correctly but I'm not really sure that the problem is solved