Windows Aero Crash

[Damo08]

Hey guys, I have recently upgraded my PC (I know the spec isn't that great!) and installed an ATi Radeon HD4650 onto my AGP slot... The drivers installed without a problem and it plays DVD's and views photographs without a problem, even with Aero enabled.

However, when Aero is enabled, there is a distortion appears, namely on the close/minimize/maximize buttons, and on any flash screens for programs starting... Anyone have any idea why this would be happening?

I have installed the latest drivers available from the ATi web site: Catalyst Hotfix 10.1

 

[thefabe]

Welcome to seven forums Damo08: Well your running a what 8 year old board which is amazing to me but great. MSI KT4AV-L (MS-6712) (Motherboards: AMD Athlon XP) by MSI -- FiringSquad Hardware Info & Web Reviews Have you tried following this thread for AGP cards? Might be worth a look.http://www.sevenforums.com/graphic-cards/35299-install-agp-drivers-hd-3850-3650-2400-pro.html Hope this can give you some help. Hopefully your running the 32 bit version if not I'm really surprised seven is working as well as it is. Fabe Start at post #180 in that thread.

 

[Damo08]

Thanks for my welcome Fabe, hopefully I shall be able to help some others whilst here!

Thanks for the info, I shall take a look when I finish work and update, and I am definitely running the 32-bit version yeah. I know the mainboard is very old just fancied getting another year out of it before I build my next system!

 

[LPDad]

LOL...be PROUD of your system. Old is.....FUN.
(for an entertaining read: http://www.sevenforums.com/general-discussion/1657-windows-7-old-computers.html )

 

[Damo08]

Unfortunately, this didn't work! I have attached 2 print screens to this message to give you a better idea of whats going on! I'm completely baffled, never experienced anything like this before! Any other ideas based on the attachments?

 

[JohnnyBee]

I have same problem with Sapphire HD 3650 AGP! Using lastest catalyst version 10.3... My motherboard is very old Asus A7N8X-X with Sempron 2500+ and 1GB DDR1 RAM... Please help me, I want use aero on my Windows 7!

 

[Damo08]

Sucks!

That sucks man, I had tried for a few weeks to fix this problem, but it turned out for me that the mainboard had fried somewhere, so certain things were no longer working... Got to the point where Windows 7 would no longer load and nothing else would work properly. So just built myself a new PC.

You have downloaded the AGP hotfix as opposed to the PCI-e one? What is the rating on your power supply? As I beleive this is what fried my mainboard in the first place...

 

[Damo08]

(Welcome to the boards by the way!)

 

[stormy13]

JohnnyBee, welcome to the forums.

It isn't your video card that is the problem but the antiquated chipset (NF2) on the motherboard, and the lack of a proper working AGP/GART driver. Try one of (or both) of the driver packs that sirdan linked to in the last post here,

http://www.sevenforums.com/graphic-cards/77871-asus-radeon-ah-4650-driver-error-please-help.html



Had a quick look at it and it looks like it is one of the last driver re-mixes for that board. With a bit of luck the AGP/GART driver in either one will get your video card working properly. It may take running the setup.exe in XP Compatibility mode,

http://www.sevenforums.com/tutorials/316-compatibility-mode.html

to get the driver to install.

 

[sygnus21]

Here's the latest AGP drivers for ATI - Catalyst AGP Hotfix - Radeon HD 4000 Radeon HD 3000 and Radeon HD 2000 Series AGP products. Not sure they'll help but....

There's a discussion thread here - Catalyst AGP Hotfix thread (current: 9.5) - Rage3D Discussion Area

Good luck.