Solved windows recovery to factory settings ask for user name and password

fixjbpcs

New member
Local time
4:07 PM
Messages
7
I have a Dell inspiron N4010 that was presenting blue screen OD all the time after fallowing the stop codes decided to reinstall windows via recovery disc. windows recovery to factory settings ask for user name and password after the initial set up it will keep me on the blue screen, but does not load any picture ID or user name on the screen please help...
 
Last edited:

My Computer My Computer

At a glance

Windows 7 home premium 64bit
OS
Windows 7 home premium 64bit
Actually this computer was purchased march 2011. I just created a set of recovery disk 3 days ago after windows defender found a Mal-ware.. after every attempt of recovery it said that recovery was successful but when i start the initial setup like ( when you buy a brand new computer) on the final step it will load the user and password lines but with out any picture or account name,
Tonight I am trying with ew steps that I found here on this forums Like going on command prompt and play with the Diskpart...

Thank's every one on this forums for all the information ... I will let you know if any luck..
 

My Computer My Computer

At a glance

Windows 7 home premium 64bit
OS
Windows 7 home premium 64bit
What about running Factory Recovery from its partition? Why did you just ignore that advice which is your best option now before Clean Reinstalling or ordering Recovery disks.
 
that does not work either, I try all the options after F8 with the repair disc, options ON CHOOSE A RECOVERY TOOL are:

  • STARTUP REPAIR.. DID NOT REPAIR ISSUE

  • SYSTEM RESTORE.... DID NO WORK

  • SYSTEM IMAGE RECOVERY.. DOES NOT LOAD

  • WINDOWS MEMORY DIAGNOSTICS... DOES NOT FIND PROBLEMS

  • COMMAND PROMPT... ( the command completed with one or more errors) some commands like net user

  • Dell DATA SAFE RESTORE.... It will find partition and and back up image created on march 2011 But results are the same. after preparing for initial set up, Windows will load but nothing will happen because it keeps asking for user name and password
 

My Computer My Computer

At a glance

Windows 7 home premium 64bit
OS
Windows 7 home premium 64bit
What happens using DataSafe Restore if you click Next without inputting a password? THis is how it is normally handled if you never set up a password.

Try running from the menu above first as the onboard Recovery is more stable, then use the Disks if necessary as back up.
 
STILL NOTHING ,..... I followed all the steps on the recovery tools and after every attempt the result is the same
 

My Computer My Computer

At a glance

Windows 7 home premium 64bit
OS
Windows 7 home premium 64bit
Are you still within the one-year Tech Support and full parts warranty from Dell? If so call or chat them now to get it recovered to your satisfaction before the Support expires, or extend it. They may send you a disk.

If not you can clean reinstall using the Product Key on COA sticker, which is a superior install anyway: Clean Reinstall - Factory OEM Windows 7

I would test if Hardware Diagnostics will run from boot to decide whether to save that small OEM partition - if not you can burn it to flash stick when needed from Dell DIagnostics downoad.
You already know you don't want to save the Recovery partition. The illustrated tutorial will show you how to delete all partitions during reinstall. Just follow the steps to get it perfect.
 
Factory warranty expired March 19,,, lucky me.... any I have the diagnostics CD that came with the computer and that did not found any problem at all...
tonight I am going to try the clean reinstall using the Product Key on COA sticker,Clean Reinstall - Factory OEM Windows 7 that you are suggesting me.. I willl let you know.. thank you again...
 

My Computer My Computer

At a glance

Windows 7 home premium 64bit
OS
Windows 7 home premium 64bit
Did you have a BIOS password set?
 

My Computer My Computer

At a glance

Windows 7x64 Home Premium SP1Intel i7 2600kG.Skill Ripjaws (DDR3-1600) 2x4GBNvidia GeForce GTS 450; Intel HD Graphics 300...
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Own build
OS
Windows 7x64 Home Premium SP1
CPU
Intel i7 2600k
Motherboard
ASUS P8Z68 Deluxe
Memory
G.Skill Ripjaws (DDR3-1600) 2x4GB
Graphics Card(s)
Nvidia GeForce GTS 450; Intel HD Graphics 3000(GT2+)
Monitor(s) Displays
Dell Ultrasharp IPS panel U2311H, Samsung SyncMaster P2350
Screen Resolution
1920x1080
Hard Drives
Samsung 850 Pro SSD 256GB, Samsung SSD 840 120GB, Seagates 1TB Barracuda ST31000528AS x2
PSU
Seasonic M12II 520W
Case
Lian Li Lancool PC-K60
Cooling
Case: 1x120mm, 3x140mm CPU: Hyper 212+
Keyboard
Logitech MK520 (wireless)
Mouse
Logitech MK520
Internet Speed
6-7 Mbps
Antivirus
Norton Security Premium, Malwarebytes on 2 (MSE on 3rd PC)
Browser
FireFox
Other Info
Audio: Logitech Z523 2.1
All right... problem fix... Thank you gregrocker....
I Did clean reinstall using the Product Key on COA sticker,Clean Reinstall - Factory OEM Windows 7 .... everything is ok now is running nice and smooth, I am finishing with all windows updates... thank you again
 

My Computer My Computer

At a glance

Windows 7 home premium 64bit
OS
Windows 7 home premium 64bit
Back
Top