Windows resource protection found corruot files

[chosen0ne]

This is what i get from command prompt:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of th
em.
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example
C:\Windows\Logs\CBS\CBS.log

C:\Windows\system32>

How to fix the corrupt files?

 

[A Guy]

Welcome to Seven Forums chosen0ne. It is suggested you run the SFC three times to repair any files found corrupt

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

If still no help, attach the CBS log and someone will have a look.

http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

A Guy

 

[zigzag3143]

Have you run SFC three times?

If the files that are corrupt are important you can fix the problem by running a repair install. If they are not you can probably leave it as is.

To find out what they are upload the CBS.log file.

 

[chosen0ne]

thanks,
i'll try sfc three times

 

[Urthboundmisfit]

See the following topic http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

Particularly the notes quoted below & the instructions in "Option THREE" on the same page:

If SFC could not fix something, then run the command again to see if it may be able to the next time. Sometimes it may take running the sfc /scannow command 3 or more times to completely fix everything that it's able to. (emphasis mine)
If not, then you can attempt to run a http://www.sevenforums.com/tutorials/700-system-restore.html using a restore point dated before the bad file occured to fix it. You may need to repeat doing a System Restore until you find a older restore point that may work.
If still not, then you can use the steps in the TIP box in the OPTION THREE section below to manually replace the files that SFC could not fix.

Hope this helps.

Edit to add: I see you've already been instructed to do this, sorry for the redundancy--these guys/gals are too fast for me lol.

 

[chosen0ne]

nope, still couldn't fix the corrupt files

here is the log:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>sfc /scanow

Microsoft (R) Windows (R) Resource Checker Version 6.0
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

Scans the integrity of all protected system files and replaces incorrect version
s with
correct Microsoft versions.

SFC [/SCANNOW] [/VERIFYONLY] [/SCANFILE=<file>] [/VERIFYFILE=<file>]
[/OFFWINDIR=<offline windows directory> /OFFBOOTDIR=<offline boot directory>
]

/SCANNOW Scans integrity of all protected system files and repairs files
with
problems when possible.
/VERIFYONLY Scans integrity of all protected system files. No repair operati
on is
performed.
/SCANFILE Scans integrity of the referenced file, repairs file if problems
are
identified. Specify full path <file>
/VERIFYFILE Verifies the integrity of the file with full path <file>. No re
pair
operation is performed.
/OFFBOOTDIR For offline repair specify the location of the offline boot dire
ctory
/OFFWINDIR For offline repair specify the location of the offline windows d
irectory

e.g.

sfc /SCANNOW
sfc /VERIFYFILE=c:\windows\system32\kernel32.dll
sfc /SCANFILE=d:\windows\system32\kernel32.dll /OFFBOOTDIR=d:\ /OFFWINDI
R=d:\windows
sfc /VERIFYONLY

C:\Windows\system32>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of th
em.
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example
C:\Windows\Logs\CBS\CBS.log

C:\Windows\system32>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of th
em.
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example
C:\Windows\Logs\CBS\CBS.log

C:\Windows\system32>

 

[A Guy]

That's not the log, go to:

C:\Windows\Logs\CBS\CBS.log

And you will find the CBS.log there

A Guy

 

[Urthboundmisfit]

@chosen0ne:

That's not the log, go to:

C:\Windows\Logs\CBS\CBS.log

And you will find the CBS.log there

A Guy

As previously mentioned see option three here.

OPTION THREE
How to See and Read Only the "SFC" Scan Results from the CBS.LOG

 

[chosen0ne]

i couldn't find the CBS.log. But i do have the sfcdetails.txt

 

[A Guy]

   Note

Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

Appears to be your problem. In googling, this is often linked to Asus pcs, and a corrupt installation. The suggested fix is a repair install.

http://www.sevenforums.com/tutorials/3413-repair-install.html

A Guy

 

[chosen0ne]

Thanks,
i'll try contact the asus service center

 

[Gokys1986]

i have the same problem

here is my log file , tech take a look of it and send me email for the solutions please... thanks..


And something else i would like to add, that may helps , but im not sure* if that has to do with it *

I have a feeling that my issue happened after I did system restore couple of times... ( Not sure ) if that occur this issue.

anyway , view my log file please and tell me what i have to do =)

 

[A Guy]

Welcome to Seven Forums Gokys1986. This is an old thread, you'd want to make a new thread in the General Discussion forum. Name it with a quick description of your problem.

General Discussion - Windows 7 Help Forums

Windows 7 Help Forums - FAQ: Board FAQ

Refer to this thread if you like

http://www.sevenforums.com/general-...-resource-protection-found-corruot-files.html

Put as much info about your problem as you can. Members can ask other questions as necessary.

Also post the sfcdetails.txt per Option Three of the tutorial

   Note

OPTION THREE
How to See and Read Only the "SFC" Scan Results from the CBS.LOG

A Guy