Winodws 7 Home Premium N won't boot, Process1_Initialization_failed

[Destroid]

I am not sure what is causing this. At first I got caught in a repair loop, then when I managed to shut it off I got an ntoskrnl.exe failure. Now I get the above message. I've tried clearing the bootcache amongst other things and nothing seems to work.

It comes up right before the logon should appear. Scandisk, memcheck etc. return nothing. I can use Live CDs etc. just fine, but the OS won't boot.

I want to try a repair install but I don't have enough space and I can't get GParted to boot. Any ideas?

 

[Destroid]

Bump

 

[Kaktussoft]

Bug Check 0x6B: PROCESS1_INITIALIZATION_FAILED (Windows Debuggers)
Perfom a "startup repair" . What is the main root cause? You can click there on "view diagnostic details" or something like that. Which test doens't have status 0x0? post a much details as possible.

Cause

Any part of the disk subsystem can cause the PROCESS1_INITIALIZATION_FAILED bug check, including bad disks, bad or incorrect cables, mixing different ATA-type devices on the same chain, or drives that are not available becuase of hardware regeneration.
This bug check can also be caused by a missing file from the boot partition or by a driver file that a user accidentally disabled in the Drivers tab.
-----
Did you disable a driver? Did you delete an important file?

 

[Kaktussoft]

I am not sure what is causing this. At first I got caught in a repair loop, then when I managed to shut it off I got an ntoskrnl.exe failure. Now I get the above message. I've tried clearing the bootcache amongst other things and nothing seems to work.

It comes up right before the logon should appear. Scandisk, memcheck etc. return nothing. I can use Live CDs etc. just fine, but the OS won't boot.

I want to try a repair install but I don't have enough space and I can't get GParted to boot. Any ideas?

Repair install is actually an in place upgrade install http://www.sevenforums.com/tutorials/3413-repair-install.html . So you have to make win7 bootable first!

 

[Destroid]

urgh.

I think some part of the WAT may have been corrupted as I've been having issues with that for some time. it's possible a virus may have corrupted it.

Startuprepair returns back the StartupRepairOffline flag.

 

[Kaktussoft]

Perfom a "startup repair" . What is the main root cause? You can click there on "view diagnostic details" or something like that. Which test doens't have status 0x0? post a much details as possible.

 

[Kaktussoft]

I am not sure what is causing this. At first I got caught in a repair loop, then when I managed to shut it off I got an ntoskrnl.exe failure. Now I get the above message. I've tried clearing the bootcache amongst other things and nothing seems to work.

It comes up right before the logon should appear. Scandisk, memcheck etc. return nothing. I can use Live CDs etc. just fine, but the OS won't boot.

I want to try a repair install but I don't have enough space and I can't get GParted to boot. Any ideas?

I got caught in a repair loop=>How did you (try to) fix that?
I got an ntoskrnl.exe failure=>What error message? How fixed?
I've tried clearing the bootcache=>How did you clear it? You did Windows 7 BSOD - PROCESS1_INITIALIZATION_FAILED | its.isber.ucsb.edu ?

 

[Kaktussoft]

Sure you did delete C:\Windows\system32\CodeIntegrity\bootcat.cache ?

 

[Destroid]

Startup Repair cannot repair this computer automatically

Problem signature:

Problem Event Name: StartupRepairOffline
Problem Signature 1: 6.1.7600.16385
Problem Signature 2: 6.1.7600.16385
Problem Signature 3: unknown
Problem Signature 4: 21200728
Problem Signature 5: AutoFailover
Problem Signature 6: 31
Problem Signature 7: CorruptFile
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Startup Repair diagnosis and repair log
-------
Last Successful Boot time: 8/11/2014 9:40:29 PM (GMT)
Number of repair attempts: 31

Session details

----------

System Disk = \Device\Harddisk1
Windows directory = D:\Windows
AutoChk Run = 0
Number of Root causes = 1

Root cause found:

----------

Unspecified changes to system configuration might have caused the problem.

The second mention of this had had:

Repair action: System files integrity check and repair
Result: Failed. Error code = 0xa
Time taken = 6069 ms

So not terribly helpful...

I'm wondering if I could copy over files from my laptop which has a functioning version of Windows 7, while keeping the registry et. all of the old computer? I've already restored from the Regbackup directory so it's not a registery issue.

 

[Destroid]

the ntoskrnl message disappeared when i copied the file form my laptop i'm currently using. i put it back, and the message remaiend gone after i cleared the bootcache. i also copied over the folder that was meant to be used in resotring the botcache.

also i'm having problems even reinstalling windows. the botable USB i'm using with the image i originally used is showing up no drivers. argh. no option for a repair install even.

 

[Kaktussoft]

Problem Signature 7: CorruptFile. We have to determine which one.

Windows drive is called D in recovery environment in your case. Very normal.. no problem.
Try http://www.sevenforums.com/tutorials/682-command-prompt-startup.html
From that command prompt:

md d:\problem
set WINDOWS_TRACING_LOGFILE=D:\problem\CBS.log
sfc/scannow  /offbootdir=d:\   /offwindir=d:\windows
find "[SR]" D:\problem\CBS.log > D:\problem\sfcdetails.txt

post results. Preferable a camshot!

copy D:\problem\sfcdetails.txt to usb stick, connect to healthy computer and post.

 

[Destroid]

sfc scannow doesn't seem to want to work, it says a check is scheduled.

 

[Kaktussoft]

System Disk = \Device\Harddisk1
Windows directory = D:\Windows
AutoChk Run = 0
Number of Root causes = 1

So windows drive is called D now. No problem. Post a camshot as asked!

 

[Kaktussoft]

Have to go,... back later. Maybe tomorrow

 

[Destroid]

Oh...

also the Windows Drive is D because of the BootCD I'm using I think.

also I've posted all the relevant info. i don't think a camshot would help and i don't feel like going through the same thing again.

how do i use sfc when it tells me a scan is scheduled? would i be able to use it from a live cd?

 

[Destroid]

I can't clear the system repair is pending which requires rebot to complete when i try sfc/scannow.

I used a command to remove pending actions, and cleared the xmls in winsxs. Interestingly, the repair finds no more errors, but I still can't run sfc. What's the problem? I'll try a reboot.

 

[Destroid]

Still bluescreening. Going to try running it a few more times.

 

[Destroid]

Pretty much out of options now. What if I copy files over from my laptop into the Windows directory and see what works?

 

[Kaktussoft]

Do #11 and you know which files

 

[Destroid]

i already told you that sfc doesn't work. it says that a scan is scheduled. i've tried everything possible and nothing seems to work.