Wireless Select Switch Problem

[sdelta]

Hello,

I have Compal FL90 Notebook.

I installed my wireless driver (driver working but switch problem)

I need active wireless ( FN + F2 ). But this is not working.

I installed wireless select switch vista32&64bit driver,
try compality mode..
try run as administrator..

but not working.

How can i open/run my wireless ? or Where can i download wireless select switch for Windows 7 ?


I cant speak good English language, sorry Thank for your helps..

 

[poeli]

Same Problem

Hi, i have the same problem. Any idea? My Problem is a File named EBLib.dll. Its not found so i cant run this programm.

 

[Zidane24]

Same here folks...I have a Compal JFT02 and apparently Compal hasn't released an updated driver/app for win7. I just leave it on all the time now (including my bluetooth)

 

[poeli]

During win vista i turned it off, now its disabled.

 

[MishaCze]

Hey.. I had the same problem (bluetooth working, wifi driver installed but cannot turn on wifi since Wireless select switch utility didn´t work).. this is what helped me (Have FL90)

Compal FL90's Tumblelog

First, if there is an "unknown device" in the devices list, use the Windows 7 driver (The hardware device which physically turns on or off BT or Wifi is called Compal Embedded Control) - This was my case

Then (or) get the WLSS 2.0.0.2 and install.

Worked for me (build 7600). Cheers, MishaCze out.

 

[Zidane24]

Hey.. I had the same problem (bluetooth working, wifi driver installed but cannot turn on wifi since Wireless select switch utility didn´t work).. this is what helped me (Have FL90)

Compal FL90's Tumblelog

First, if there is an "unknown device" in the devices list, use the Windows 7 driver (The hardware device which physically turns on or off BT or Wifi is called Compal Embedded Control) - This was my case

Then (or) get the WLSS 2.0.0.2 and install.

Worked for me (build 7600). Cheers, MishaCze out.

I want to say that you have my dearest thanks...I have successfully installed the Wireless Select Switch on my Compal JFT02. I don't know how or where you found this fix but you are a lifesaver!

Chris

By any chance would you know how to get Smart Battery to install on Windows 7 for JFT02/JFL92/90 series would you?

 

[MishaCze]

Hi, nope, unfortunately I do not know.. to tell the truth I do not use it anyway :/ I tried now to install it anyway and it installed (1.0.0.10) but it doesn´t seem to work ( selected the 50 % charge option, unplugged, let the laptop consume some of the power and plugged back.. the truth is that for a while it was really plugged in and not charging, so it seemed to work, but after a while it began to charge.. maybe this is caused by high state of battery when tried to charge.. about 96 %.. maybe it has to be charging from low state like 10 % and only then the application can stop the charging at certain percentage ). But it seemed to install, no error etc.. even the hardware button glows :/ maybe i might give it a try to drain the battery to low and then see if it charges only to 50 %; I´ll let know when done

So.. tried and smart battery does not work.. started charging at approx 40 % with SB set to charge to 50 %, now charged 70 % and charging ( so it does not work unless it is meant to look like 100 %.. which means it then it should be measurable by battery life - approx one hour instead of two.. maybe out of curiosity I will try this influence but not now I guess)..

 

[Zidane24]

Hi, nope, unfortunately I do not know.. to tell the truth I do not use it anyway :/ I tried now to install it anyway and it installed (1.0.0.10) but it doesn´t seem to work ( selected the 50 % charge option, unplugged, let the laptop consume some of the power and plugged back.. the truth is that for a while it was really plugged in and not charging, so it seemed to work, but after a while it began to charge.. maybe this is caused by high state of battery when tried to charge.. about 96 %.. maybe it has to be charging from low state like 10 % and only then the application can stop the charging at certain percentage ). But it seemed to install, no error etc.. even the hardware button glows :/ maybe i might give it a try to drain the battery to low and then see if it charges only to 50 %; I´ll let know when done

So.. tried and smart battery does not work.. started charging at approx 40 % with SB set to charge to 50 %, now charged 70 % and charging ( so it does not work unless it is meant to look like 100 %.. which means it then it should be measurable by battery life - approx one hour instead of two.. maybe out of curiosity I will try this influence but not now I guess)..

I actually made a How-To for the WSS based upon your solution...that way any compal folks who drift here will be able to get that sorted out

I wanted to get smart battery to work so the last unidentified device in my Device Manager would be solved

 

[RobertBernstein]

Thank you! This solved the problem with my PowerNotebook PowerPro P 11:15 (JFL92) Windows 7 Ultimate x64 installation. My Wireless Select Switch works again. You rock!

 

[angel700]

Hey.. I had the same problem (bluetooth working, wifi driver installed but cannot turn on wifi since Wireless select switch utility didn´t work).. this is what helped me (Have FL90)

Compal FL90's Tumblelog

First, if there is an "unknown device" in the devices list, use the Windows 7 driver (The hardware device which physically turns on or off BT or Wifi is called Compal Embedded Control) - This was my case

Then (or) get the WLSS 2.0.0.2 and install.

Worked for me (build 7600). Cheers, MishaCze out.

All of the links in that post are dead, I tried googling for the driver and its nowhere to be found, on the compal website I can get wss 2.0.0.2, but they do not have the driver. Anyone know where to get it? Edit: I found it finally, for anyone interested its at: Forum Karen Notebook S.A. :: Zobacz temat - Problem z Wireless Select Switch na Windows 7 x64 ROZWI?ZANY