writing a program that boots on startup to do a short list of things

[jessjess]

Hi all,
not so great at programming, nor writing code for windows
my uncles recently bought a new computer, which i setup. however, the modem and network system that they have is NOT nice in anyway whatsoever. the computer connects to the modem on boot, but NOT the internet. every time the computer boots up, you need to go to 'connect to a network' and connect to the configured PPPoE network.
they do not like having to be able to do this, and i was wondering how i could go about writing a code that once the computer boots it does the following essentially:

set_cursor(x1,y1) #move the cursor to over teh network taskbar
left_click
delay(100)
set_cursor(x2,y2) # move the cursor to the network to be connected to
left_click
delay(100)
left_click

#end program

simple, but im not too sure how to implement it to work properly

 

[Thorsen]

Can you try this and see if it fixes:

Type into start bar "Manage Wireless Networks" and when control panel window opens, right click on the wireless network you use (make sure it is highlighted) and go to Properties.

See if box is checked to "Connect automatically when this network is in range"

 

[MilesAhead]

If Thorsen's setting doesn't fix it, you can easily program macros using AutoIt3 or Autohotkey_L. Both are free. If you have programmed some Basic you might find AutoIt3 syntax a bit easier. On the other hand, Autohotkey_L has more flexible hotkey control.

AutoIt3 may be a bit easier to use initially getting a match on the window title.

Both use a "Send" command to send keys to the active window control. Both can be compiled to 32 or 64 bit app. Both are good to have for creating small convenience programs. Sometimes I write programs that use 2 exe files. One in AHK_L and one in AutoIt3 so I can combine the strengths of both(and make it easy on myself.)

 

[Thorsen]

I agree with MilesAhead and would opt for coding that doesn't require screen x/y positions as these can change due to resolution and possible movement of icon in the taskbar

 

[Alejandro85]

If the modem is really a modem/router, you can change its setup to router mode so that it autoconnects on its own without OS intervention. Or if you happen to have an additional router, you can set it up to make the PPPoE call for you, again without an OS assistance.

 

[Thorsen]

also check out this thread. someone had something similar prior:
http://www.sevenforums.com/network-sharing/21761-automatically-connect-pppoe-connection-login.html