New
#360
Ron Dow, I don't recall what you have done, but have you tried the Standalone Windows 7 SP1 installer. or tried to Reset Windows Update?
More info Windows Update - Download Standalone MSU Installer File
Thanks essenbe - many moons ago, I did download and use the SP1 installer - it didn't work. I didn't try an update reset. However, I did come across some evidence that M$ had been working on tools to overcome similar issues to mine and it may have been one of those that gave me success (I did add an update to my last post detailing my experience a couple of hours ago). One of the problems identified by M$ is that failure can occur if a driver cleaner (or similar) has deleted a driver without updating the 'manifest' - their remedy was released in 2014. Clearly the stumbling blocks were many and varied but now Win10 upgrading is on the table for many pre-SP1 users, more are going to find it necessary to overcome these old problems.
hey guys... I read the guide and I created a disc that has all installations, x86 and x64, and I can see that it is loaded with all installations if I launch the DVD from inside a desktop. Unfortunately, I can't boot to it. It is skipped and Windows is loaded. The two I made that have just x86 Windows 7 installations, the other being x64, both boot fine and work great with the cfg remover utility.
Like I said, the disc runs fine on my desktop environment in Windows 10, I just can't get any machine to boot to it.
Dead link?
Except enterprise version, you still need the seperate DVD or ISO of it to have it in just like with 2k8?
Wait you can do that?? I thought that was not possible?!
So how does the recovery environment work with Hoopstar's AIO version when something breaks and windows boots into that mode but requires the disc to make anything work?
You got a tutorial on that? I would also like to create an AIO that also includes both 32-bit and 64-bit recovery environments using Hoopstar's version.
Follow Hoopstar's instructions, supposedly does what you need...
Nope, Hoopstar apparently did an AIO that included that (both 32 bit and 64 bit) and even 2k8 on one disc!
Yes, I'd like to try out this too and add in a recovery mode and a repair install mode to the Hoopstar's AIO version...
According to angry birds picture dude (I forgot his name...) he says its possible to also include recovery and repair environments for both 32 and 64-bit on one disc, but of course conveniently left out the instructions to do so...
Is that the instructions to add recovery and repair modes onto the AIO disc? Site appears to be dead.....welp, there goes my chance of creating an AIO install disc with recovery and repair modes integrated....
Ah, there you are - angry bird picture dude; where is the tutorial with noob friendly steps????
Holy crap - 50 in 1 disc install media??! That must be a monster disc! What operating systems were included in this 50 in 1 install disc?
Did you follow Hoopstar's instructions?
Actually with Linux type kernels, you need to *specifically* run the malware for malware to run or else it'll never run even if you have it right in front of you. I guess this would apply to terminal only linux flavours, for gui, I guess double clicking the infected file would be enough for it run...but the malware would have to be designed to run on all linux flavours and nt just say linux mate or else what if you got puppy linux but the malware only works on linux mate? Well shit, lol malware distributor fail.
Yes, look at Hoopstar's post...
Except enterprise, you still need its seperate ISO along with both 32-bit and 64-bit flavours in combination with a copy of any two other win7 varient for 32-bit and 64-bit, apparently. So you need 4 (5 or 6 if you wanna include 2k8 - cant remember if theres a 32-bit flavour of 2k8 or not...) ISOs for a universal win7 install disc that includes both 32-bit and 64-bit versions.
Why are you quoting 11-year-old posts? most people have moved on to modern OS's years ago!!!
Because I happen to be needing an up to date universal windows 7 install disc? And it just so happens there is a thread about it that I can follow and get answers on? This is the "sevenforums" isnt it? Which *specifically* helps windows 7 users regardless the case or age of the operating system, is it not? If not, why not rename the forum to "Modern Operating Systems Help Forums Only Within The Last Couple Of Years Or Latest Supported Operating System Still In Use"? with the url changed to www.moshfowtlcofyolsossiu.com or http://www.modernoperatingsystemshel...stillinuse.com.
Well just post that you need an update and dont chain necro post like a knob.
Well I was going through all 364 posts just in case someone has already answered my question that isnt already on the thread post. Some of the posts made me want to question more to get more answers, hence my quotes! Others I just wanted to comment to help others get pointed in the right direction or throw my opinion about.
So yeah, I'm still looking for an update for Hoopstar's AIO version with noob friendly steps for adding recovery and repair option modes for all windows 7 versions, including enterprise 32-bit and 64-bit as well as 2k8 version too (one option points to a dead link and the other relies on SIW2's instructions but he's not sharing those instructions...or has been shared but the post has been deleted or hidden from my view....)
The 120 day extension trial link is 404 - this has peaked my curiosity in case I want to test out an operating system longer, I think you get locked out after 30 days the last time tested and forgot about my test bed...
Annnnnnnnnnnnnnnnnnnddddddddd that's it if I were to condense my huge ass quote post down to a summary without fluff.
There is an updater on this site, however it is not for multi bit version.
If you want to do multi, there is a scipt that does it. Is in Russian.
If you can find a native Russian speaker to translate it all for you - you are in luck.
video demonstration:
Пример работы UP_Integrator - YouTube
- - - Updated - - -Code:The main task of UP_Integrator is to conveniently integrate UpdatePack7R2 updates into the original install.wim from Windows 7, the ability to create mono \ multi-bit install.wim, install.esd or split install.wim into install.swm, as well as mono \ multi-bit installation ISO image of Windows 7. For UP_Integrator to work, you must have install.wim and UpdatePack7R2 files next to it. Key features: * Updating the original bootable ISO image of Windows 7. * Automatic extraction of instal.wim and boot.wim files from bootable ISO images of Windows 7 and older for their subsequent processing by the integrator. * Removing unnecessary indexes from install.wim, integrating updates into selected indexes. The ability to update all install.wim indexes by increasing the Windows edition * Combine bit install.wim and create multi bit install.wim convertible to install.esd or install.swm. * Integration into install.wim, boot.wim, winre.wim of the SmartFix.exe and MSDaRT utilities (md5: ECDA7B18A5C1EAE49344E825B84A06C8). * Creation of a mono \ multi-bit bootable ISO image based on loaders from Windows 7 or later with the ability to add custom settings and applications. * Support for your own launch keys UP_Integrator for processing adjacent files. * Support for launch keys and additional functionality UpdatePack7R2. Peculiarities: - The system must have at least 10 GB of free hard disk space and at least 1 GB of free RAM. When updating the ISO image of Windows 7, the free space must be increased. - Installation ISO images of Windows, files install.wim and boot.wim must be original, without previously integrated updates and additions. - The names and extensions of the install.wim and boot.wim files can be anything, the files must be located near the integrator. The script will itself determine their type and bit depth. - Integration of updates into all indexes using the upgrade method is much faster than the integration with the standard method. - The installation interface based on Windows 8.1 and later boot loaders will be similar to that of the original Windows 7 installer. - The date the Windows was modified in the installation window will match the UpdatePack7R2 date - The integrator can process install.wim and boot.wim files, * .swm files in the swn folder, bootable ISO images in the Original_ISO folder. Folders and files should be near the integrator. - An AutoUnattend_bw _ *. Xml answer file may be automatically added to boot.wim files, bypassing the end user agreement. - Creating a multi-bit install.wim is possible only if there is one Windows 7 edition next to UP_Integrator. - Creating a bootable image is possible only if there is a pair of install.wim and boot.wim next to UP_Integrator. Multi-bit install.wim and boot.wim pairs can create a multi-bit boot image. The default bootable disk image is built with the Retail version. To change the version of the disk image, place your ei.cfg file in the ISO folder next to UP_Integrator. When starting UP_Integrator with the [Shift] button held down, the following is performed: - compression of the adjacent install.wim in install.esd - Integration of SmartFix into the recovery environment and bootloaders if there are a number of SmartFix, winRE.wim, boot * .wim files. - integration of Win7USB3 into install.wim indexes if there are a number of Win7USB3.exe, install * .wim files Application Integration Keys: UP_Integrator.exe -aiU -gm2 -fm0 - integration of Win7USB3 into all indexes install * .wim if there is Win7USB3.exe nearby. UP_Integrator.exe -aiF -gm2 -fm0 - integration of SmartFix into boot * .wim if SmartFix.exe is available nearby. UP_Integrator.exe -aiE -gm2 -fm0 - compress install * .wim to install * .esd UP_Integrator.exe -aiW -gm2 -fm0 - decompress install * .esd into install * .wim UP_Integrator.exe -aiS -gm2 -fm0 - splitting install * .wim into install * .swm files in the swm folder UP_Integrator.exe -aiC -gm2 -fm0 - build install * .wim from install * .swm files in swm folder UP_Integrator.exe -aiI -gm2 -fm0 - create a boot image UP_Integrator.exe -aiM -gm2 -fm0 - modification of the boot.wim interface for Windows 8 and older under Windows 7 UP_Integrator.exe -aiX -gm2 -fm0 - extract * .wim from images in the Original_ISO folder * wim name can be any, multiple indication of keys is possible, keys -gm2, -fm0 are optional.
Here you go - somebody has done it - too much effort for me, so you are lucky
UP_Integrator_v6.5.6.1_en.zip
you can check the video to find out where to put everything:
and check my updater thread for links to simplix updatepack7, and abbodi netframework and vc redist .wa files
Update your Win 7 installation media
- - - Updated - - -
That looks great work by Sov, there are some similarities to my much humbler updater, but Sov's has extra functions that mine doesn't and is more complicated.
Last edited by SIW2; 02 Aug 2021 at 12:51.