New
#1
BSOD ntoskrnl.exe again
A few dumps this time. i was watching a video on youtube when this happened.
A few dumps this time. i was watching a video on youtube when this happened.
- Check for heating issues using Speccy or HWmonitor
- HWMonitor CPUID - System & hardware benchmark, monitoring, reporting
- Speccy - System Information - Free Download
- Please upload a summary tab using Speccy. Screenshots and Files - Upload and Post in Seven Forums
- Test and Diagnose RAM issues with MEMTEST86+
- Pay close attention to Part 3 of the tutorial "If you have errors". Take the test for at least 7-10 passes. It may take up to 22 passes to find problems.
- Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. RAM - Test with Memtest86+
- System File Checker
- The SFC /SCANNOW Command - System File Checker scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible. If you have modified your system files as in theming explorer/system files, running sfc /scannow will revert the system files to it's default state.
- Link to full tutorial: SFC /SCANNOW Command - System File Checker
- Run Disk Check in Windows 7
- Run this on your Hard Drive(s). This will show you how to run Check Disk or chkdsk in Windows 7 to check a selected hard disk for file system errors and bad sectors on it. With both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log
- Link to full tutorial: Disk Check
- Virus Check:
- Make scans with these tools below:
- Application conflict:
- Reduce the start-up items. This will help avoid software conflicts:
I've got no problems with anything viruses or otherwise, heres my speccy after running for 8 hours and playing games. computers water cooled, no real chance of overheating with the build that's in it.
Another BSOD today. Here is the dump file!
- Test and Diagnose RAM issues with MEMTEST86+
- Pay close attention to Part 3 of the tutorial "If you have errors". Take the test for at least 7-10 passes. It may take up to 22 passes to find problems.
- Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. RAM - Test with Memtest86+
You've given me instructions to do this before, I've now done it 2 times and wasted quite a bit of time on it. No errors.
the troubleshooting will take some time. If you think it is waste, troubleshooting is not for you. Anyway, you may enable driver verifier now.
Enable Driver Verifier to see if it catches any misbehaving driver: