Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after startup and loading my programs (Did a system restore)

15 Aug 2016   #31
axe0

Windows 10 Pro
 
 

A critical process can be terminated or exited for a fairly amount of reasons, a failing hard drive, the faulty memory, NTFS system corruption, BIOS has a bug, etc.
It looks like there have been a large amount of pagefaults in the threads of this process, I'm not sure what kind of pagefault, but I would suggest to run MemTest86+.



BSOD after startup and loading my programs (Did a system restore) Diagnostic Test BSOD after startup and loading my programs (Did a system restore)
 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

Note   Note


MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.


My System SpecsSystem Spec
.
15 Aug 2016   #32
AnnaB

Windows 7 64-bit
 
 

I'm having issues loading off a USB. When I load into the USB it says missing operating system. Ive followed directions on the forum post however it's not working for USB. Would prefer to run it that way since I don't have a CD drive.

https://1drv.ms/i/s!AmB3xSQ51UQ6hGEfuiyMJTcpj9bp
(One drive Picture link)


Simple USB switch seems to be the fix. The UBS seemed to not be identifying. I loaded a Sandisk USB just fine. Will run the Test overnight, the results will be posted tomorrow afternoon.

Thank you again, Axe0!
My System SpecsSystem Spec
16 Aug 2016   #33
AnnaB

Windows 7 64-bit
 
 

https://1drv.ms/i/s!AmB3xSQ51UQ6hGLwcSZPM_n9YAl-

Passed 8 times. No errors!

Edit: New BSOD at 7:20 PM PST. Here's the ZIP attached.


Attached Files
File Type: zip ANNA-PC-Tue_08_16_2016_192120_74.zip (975.1 KB, 1 views)
My System SpecsSystem Spec
.

17 Aug 2016   #34
axe0

Windows 10 Pro
 
 

Please run chkdsk again and post the log
Quote:


BSOD after startup and loading my programs (Did a system restore) Diagnostics Test BSOD after startup and loading my programs (Did a system restore)
 HDD TEST

Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log Check Disk (chkdsk) - Read Event Viewer Log
I can't find back that you've checked your SSD for firmware updates with Samsung Magician.
If you have not please do so and let me know if there is any (and install it)
If you have, please let me know
Quote:
2. Check your SSD for firmware updates
My System SpecsSystem Spec
21 Aug 2016   #35
AnnaB

Windows 7 64-bit
 
 

Here is a screenshot of my firmware in Samsung Magician, will post the chk disk log in the morning. Got back from a vacation!

Also, the link that is there for the posting of the log doesn't seem to work for me. sends me straight to your seven forums home. Might be a glitch?


Attached Thumbnails
BSOD after startup and loading my programs (Did a system restore)-ssd-firmware.png  
My System SpecsSystem Spec
21 Aug 2016   #36
axe0

Windows 10 Pro
 
 

Small typo, fixed it.
My System SpecsSystem Spec
22 Aug 2016   #37
AnnaB

Windows 7 64-bit
 
 

Here's the chk disk file axe0!


Attached Files
File Type: txt CHKDSKResults.txt (21.3 KB, 1 views)
My System SpecsSystem Spec
22 Aug 2016   #38
axe0

Windows 10 Pro
 
 

Good news
Code:
              CHKDSK discovered free space marked as allocated in the
              master file table (MFT) bitmap.
              Windows has made corrections to the file system.
Let me know if another BSOD occurs
My System SpecsSystem Spec
25 Aug 2016   #39
AnnaB

Windows 7 64-bit
 
 

Downloaded Sims 4, Streamed, and did some browsing. Came back to my PC in afternoon and had a backlit screen that was just empty.

New log here.


Attached Files
File Type: zip ANNA-PC-Thu_08_25_2016_115233_86.zip (970.8 KB, 1 views)
My System SpecsSystem Spec
25 Aug 2016   #40
axe0

Windows 10 Pro
 
 

I would suggest to try a vanille installation.

A vanille installation is Windows 7 updated with Microsoft Security Essentials, nothing else.
You could do it as follow
  • Put everything of the HDD on the SSD,
  • Remove the SSD,
  • Install a vanille Windows 7 on the HDD.
OR
  • Put everything from the SSD on the HDD that you do not want to loose
  • Remove the HDD,
  • Clean reinstall a vanille Windows 7 on the SSD

Clean install tutorial Clean Install Windows 7
My System SpecsSystem Spec
Reply

 BSOD after startup and loading my programs (Did a system restore)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing DoTA2, Startup Repair/System Restore non-functional
While playing DoTA2, I got a BSOD, and then my computer turned off before I could read all it said. When I start back up, I am prompted to do a startup repair or a system restore. When I attempt to do either of theses, I get the error: The instruction at 0xfb9aca53 referenced memory at 0x05847296....
BSOD Help and Support
System Restore points not loading
Hi. Having issues with any of my restore points in Win7 restoring my system. I think I have a lead on what's happened which may be a bigger problem. I have Win 2000 Pro SP4 on my 80 Gig HD (drive C:\ initially, works fine and my first OS. Decided (finally) to install Win7 Home Premium x64 on my...
Installation & Setup
StartUp Programs not loading often
I have several programs such as AVG, DFX, IDM, APC PowerChute and smile webshots which set to automatically start when i boot Windows 7. But sometimes it doesn't load and I have to manually open each one. I went into msconfig and it shows all these programs are in startup. What could be the...
General Discussion
Windows won't startup, System Repair and System Restore failed.
Gateway DX4720-03, Windows 7 HP 64-bit. Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with...
General Discussion
System Restore and Programs that were installed before restore
After doing a system restore I noticed a couple of programs I had installed were gone. This is not a problem because I do not need them. My question is are the programs completely gone or are there still parts of them on the hard drive somewhere? The programs were a Mal-ware remover (Emisoft) and...
Backup and Restore
BSOD on startup, error on system restore
First, I apolagize for spelling/grammer I am on my iPod. My computer gets a stop BSOD error on startup. I have been booting from my CD and using system restore. All of the errors are: System restore failed to extract the file (D:\Program Files (x86)\Mozilla Thunderbird\aomp/nents) from the...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App