Changing C: drive


  1. Posts : 4
    win 7
       #1

    Changing C: drive


    Somewhere along the line in loading Win 7 over Vista the C:drive has been designated as the D drive. When I try to change it with disk mgt. I get the error that I do not have the proper parameter. I have no problem using it as is and on the desktop it shows at C: but would prefer that I can make this change.The HD has been proportioned into 3 drives and the other two are easily changed if I wish.
    Last edited by geophoto; 03 Mar 2010 at 10:19.
      My Computer


  2. Posts : 774
    Vista Ultimate X64/ Windows 7 Dual-boot
       #2

    Post a snip of your Disk Management window...
      My Computer


  3. Posts : 22,814
    W 7 64-bit Ultimate
       #3

    Hello geophoto, welcome to Seven Forums!



    This is a good tutorial to use to post snips here at the forums, at the link below.

    A Preferred Method of Uploading/Posting Screen Shots
      My Computer


  4. Posts : 4
    win 7
    Thread Starter
       #4

    patio said:
    Post a snip of your Disk Management window...
    [IMG]file:///D:/Users/GEORGEPHOTO/Pictures/DISK%20MGT.PNG[/IMG]
      My Computer


  5. Posts : 4
    win 7
    Thread Starter
       #5

    Changing C: drive-capture.jpg
    patio said:
    Post a snip of your Disk Management window...
      My Computer


  6. Posts : 2,736
    ...
       #6

    If I may ask, what is the reason you are using "Dynamic" partitions?

    Vista and 7 use a "System Reserved" "Primary" 100MB partition to hold the boot code, to be a boot partition, and provide a boot menu when more than one OS is installed. Windows does not allow the change of the drive letter when the partition you want to change is the one with the boot code and Operating System being used. So when you boot to Vista, you cannot change the Vista drive letter, and when you boot to 7, you can not change the 7 drive letter. I have found that using the 100MB "System Reserved" partition allows for giving other partitions any drive letter.

    Cheers!
    Robert
      My Computer


  7. Posts : 4
    win 7
    Thread Starter
       #7

    Thanks for the feedback. I'm not that knowledgable and should pick up a book on OS to better understand what these things. If I wanted to start from scratch, it seems that I would have to format the entire drive and then start over again. Thanks again.
      My Computer

  8.    #8

    You'll need to convert the HD to Basic from Dynamic, which will wipe all of the data.

    http://technet.microsoft.com/en-us/l...15(WS.10).aspx

    You can then create New partition(s) and format using the Win7 installer Drive tools during Custom install.
      My Computer


  9. Posts : 2,736
    ...
       #9

    geophoto said:
    Thanks for the feedback. I'm not that knowledgable and should pick up a book on OS to better understand what these things. If I wanted to start from scratch, it seems that I would have to format the entire drive and then start over again. Thanks again.
    You are most welcome, geophoto. If you can backup everything, starting over can sometimes be easier. But you do have other options if you are interested in them.

    I found this link to be very helpful of partitions: Understanding Disk Partitions

    Cheers!
    Robert
      My Computer


  10. Posts : 22,814
    W 7 64-bit Ultimate
       #10

    Here's another very useful tutorial at the link below.

    Clean Install Windows 7
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:44.
Find Us