0x124 is usually a hardware error, but software is still possible,
Your JMicron card reader drivers were blamed. Try installing the ones attached to this post. I attached them to save you the trouble of digging through the driver page.
Remove Norton with this tool: ftp://ftp.symantec.com/public/englis...moval_Tool.exe
Replace with MSE: http://www.microsoft.com/security_essentials
If that doesn't work, do these hardware tests.
RAM: RAM - Test with Memtest86+
CPU: https://www.sevenforums.com/tutorials...t-prime95.html
Any overclocking being done?
Test temps (you should already have Speedfan installed from the Prime95 test).
...Summary of the Dumps:
Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Aug 22 09:09:39.039 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:06.052
BugCheck 124, {0, fffffa8004fe68f8, 0, 0}
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
PROCESS_NAME: System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Aug 22 07:06:33.299 2010 (UTC - 4:00)
System Uptime: 0 days 0:01:04.312
BugCheck 124, {0, fffffa8004f9a038, f2000040, 800}
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
PROCESS_NAME: TouchPortal.ex
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Aug 22 07:03:57.107 2010 (UTC - 4:00)
System Uptime: 0 days 0:14:54.121
BugCheck 124, {0, fffffa8004fdf038, b2000040, 800}
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
PROCESS_NAME: System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Aug 22 06:48:19.052 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:35.065
BugCheck D1, {29, a, 0, fffff8800693ccfd}
*** WARNING: Unable to verify timestamp for jmcr.sys
*** ERROR: Module load completed but symbols could not be loaded for jmcr.sys
Probably caused by : jmcr.sys ( jmcr+ecfd )
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Aug 22 06:46:48.623 2010 (UTC - 4:00)
System Uptime: 0 days 1:36:33.471
BugCheck D1, {29, a, 0, fffff88007b31cfd}
*** WARNING: Unable to verify timestamp for jmcr.sys
*** ERROR: Module load completed but symbols could not be loaded for jmcr.sys
Probably caused by : jmcr.sys ( jmcr+ecfd )
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Aug 21 03:27:21.359 2010 (UTC - 4:00)
System Uptime: 0 days 0:07:25.372
BugCheck 124, {0, fffffa8004fd7038, b2000040, 800}
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
PROCESS_NAME: System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Aug 19 16:31:57.270 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:08.283
BugCheck 124, {0, fffffa8004fa16f8, 0, 0}
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
PROCESS_NAME: System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии