Dear experts, I need your help.
Back in October I built myself a new gaming computer. Hardware specs are as follows:
---
CPU: Intel i5-2500K
Heatsink: Thermaltake Frio
GPU: MSI 560GTX-Ti Twin Frozr II
MoBo: GIGABYTE Z68X-UD3H-B3
RAM: G.Skill Ripjaws 8GB (2x4GB)
HDD: WD 1002FAEX Caviar Black 1TB
DVD: Asus DRW-24B3ST
PSU: Corsair 650TX V2
OS: Windows 7 Home Premium 64bit
---
What Happened
Until three days ago, my computer was running perfectly.
I never OC'd it or installed and additional hardware to the one listed above. It has been running for
four months without any issues.
Three days ago, I got a Blue Screen (code 0x00000124) with a message that a hardware error had occurred (
screenshot). This had been my first ever BSOD with this PC. No CPU-demanding applications were being run at the time of the crash.
When I restarted my PC, and
every single restart after that, I would get the exact same BSOD. This would happen either during the Windows7 welcome screen (where you enter login password), or a few seconds after logging in.
I was always able to boot up Windows in safe mode. I tried updating pretty much every single driver, but everything was already up to date. Unfortunately, I didn't save any crash dump files during this time
I am sorry for being unable to provide you with a minidump!
I started getting the BSOD even while booting in safe mode! But only sometimes, strangely enough, whereas I would still get the blue screen every single time when booting Windows normally.
I finally decided to do a fresh Windows install. The Windows setup ran successfully, but while booting up for the first time (which is essentially also part of the operating system installation), yes you guessed it.... BSOD!!! Which means that the OS didn't finish installing properly. Now every time I start my PC, after the "loading operating system.." message it gives me a "missing BOOTMGR" error.
I have tried re-installing Windows again a few times, but it always crashes sooner or later. Some times it blue-screens already while extracting the files from the Windows installation DVD.
I am now without a working Operating System and trying to narrow down the faulty piece of hardware which is causing the crashes during Windows installation.
What I have tried
* Removed my graphics card from my PC entirely and used my Mobo's video output. No change, BSOD persists.
*
Reset my BIOS to the "failsafe" defaults (even though they were never changed much). No change. I also checked my idle CPU temperatures while in BIOS: everything normal.. 24 degrees max.
See screenshots here.
* It was suggested that code 0x0124 on Gigabyte Mobos indicated insufficient
Vcore. Tried increased the Vcore from the default 1.24 to 1.35 and QPI/VTT from 1.05 to 1.15. No change.
* Tried booting from a Knoppix 5.1.1 bootable CD (Linux from CD), but it gave me a "can't find filesystem found" error.
* Tried
swapping the HDD for another (new) 1.5TB WD Caviar Black. No change.
* Ran
MemTest86+ for 8 hours straight (7 passes). No errors were found.
* Tried using only
1 RAM stick at the time. BSOD during Windos installation persisted regardless. Unless both sticks are faulty (unlikely), I think this rules out RAM problem.
*
[Update 24.03.2012] Cleaned out entire chassis. Unplugged and re-plugged everything in the Mobo, removed heatsink and CPU,
applied new thermal paste, swapped SATA cables for new ones, vacuum cleaned everything. Didn't help.
*
Flashed BIOS. Original revision was F3. Tried two different revisions, starting with the F11 (newest one available at the
Gigabyte website), then F4. No change.
[Update 30.03.2012]
*
Swapped MoBo for a completely new one (same model Gigabyte Z68X-UD3H-B3). Problem persists.
Now what?
I need new ideas on what to try. I would like to determine with certainty where the issue is.
* Keep playing around with Vcore? What values can I (safely) test?
*
Please note that I currently have no working Operating System on the machine.
* Due to this, I am unable to provide you with minidump files at the moment. I apologize for this!
THANK YOU FOR YOUR TIME AND EFFORT!