New
#21
You have a lot of scheduled tasks... Disable all of them for now to test.
You have a lot of scheduled tasks... Disable all of them for now to test.
I followed the first part of the troubleshoot application conflicts with clean startup - the stop all non-windows applications part. I'm still having BSODs and freezing/crashing. Here's the latest info.
Problematic Software:Code:Start Menu\Programs\PC Tools Registry Mechanic Public:Start Menu\Programs\PC Tools Registry Mechanic Public
- Many of us on the forums actually do not recommend automated optimization tools for Windows 7. Windows 7 does a much better job of handling its own optimization than its predecessors did. We especially do not recommend registry cleaning as an "optimization" step because automated registry cleaning causes more harm to the registry than it actually repairs.
In the future, if you need help optimizing Windows 7, please post a thread in Performance & Maintenance - Windows 7 Forums or follow the tutorial enclosed in that forum to Optimize Windows 7.
- Here is what others have to say about the software you have installed: Registry Mechanic | Forum | WOT (Web of Trust)
You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.
WarningBefore you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!
For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
- If you are overclocking any hardware, please stop.
- Monitor temperatures during the following tests.
Use the following programs to monitor the temperatures.
- Real Temp is a good CPU temperature monitor.
- Speccy - System Information - Free Download will monitor all hardware temperatures.
- HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
- Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.
- Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.
- Follow the steps for doing CPU stress test using IntelBurnTest
- Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
- Shut down and turn off your computer.
- Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
- Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
- Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
Remember to read closely through Stop 0x124 - what it means and what to try for the crash.
Here are results of a failed video memory stress test. I've done the furmark stress test before on my old video card and it would overheat, so i upgraded to this new video card and no longer have overheating problems.
Looks like the video card memory is damaged. It could also be the card is not properly seated. Remove the card, and then reseat it in the motherboard slot. You may also consider cleaning the contacts and slot of dust while it is removed: "Use an ink eraser or an electrical contact treatment, available at electronics supply stores, to ensure adapter card contacts are clean" (Bug Check 0x7A: KERNEL_DATA_INPAGE_ERROR).
As you add and remove hardware, follow these steps for ESD safety:
- Shut down and turn off your computer.
- Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
- Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
- Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
Once these steps have been followed, it is safe to remove and replace components within your computer.
After doing the above, run the video memory tests again. See if you still get errors.
After tons of troubleshooting I finally gave up and replaced the CPU and motherboard. No more BSOD. Thanks for all the help.