The crash dump looks different.
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff800037692d4, fffff8800371d948, fffff8800371d1a0}
Probably caused by : ntkrnlmp.exe ( nt!ViPendingCompleteAfterWait+64 )
Followup: MachineOwner
---------
1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff800037692d4, The address that the exception occurred at
Arg3: fffff8800371d948, Exception Record Address
Arg4: fffff8800371d1a0, Context Record Address
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!ViPendingCompleteAfterWait+64
fffff800`037692d4 4c8b5df0 mov r11,qword ptr [rbp-10h]
EXCEPTION_RECORD: fffff8800371d948 -- (.exr 0xfffff8800371d948)
ExceptionAddress: fffff800037692d4 (nt!ViPendingCompleteAfterWait+0x0000000000000064)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: ffffffffffffffff
Parameter[1]: 0000000000000000
Attempt to unknown address 0000000000000000
CONTEXT: fffff8800371d1a0 -- (.cxr 0xfffff8800371d1a0)
rax=fffffa800a6f1160 rbx=fffffa800a6f4660 rcx=fffffa800a6f4661
rdx=fffffa800a6f1161 rsi=fffff9801244e790 rdi=fffffa800a5869a0
rip=fffff800037692d4 rsp=fffff8800371db80 rbp=6767676767676767
r8=fffffa800a6f1160 r9=0000000000000000 r10=fffff80003778740
r11=fffffa800a6f4660 r12=fffff8000346ed30 r13=fffff80003769340
r14=0000000000000000 r15=fffff880009edf40
iopl=0 nv up ei ng nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010282
nt!ViPendingCompleteAfterWait+0x64:
fffff800`037692d4 4c8b5df0 mov r11,qword ptr [rbp-10h] ss:0018:67676767`67676757=????????????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: NULL_DEREFERENCE
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: ffffffffffffffff
EXCEPTION_PARAMETER2: 0000000000000000
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800034f8100
GetUlongFromAddress: unable to read from fffff800034f81c0
0000000000000000 Nonpaged pool
FOLLOWUP_IP:
nt!ViPendingCompleteAfterWait+64
fffff800`037692d4 4c8b5df0 mov r11,qword ptr [rbp-10h]
BUGCHECK_STR: 0x7E
LAST_CONTROL_TRANSFER: from fffff8000376936c to fffff800037692d4
STACK_TEXT:
fffff880`0371db80 fffff800`0376936c : fffff800`0346ed30 00000000`00000080 fffffa80`03cde5f0 ffffffff`ffffff00 : nt!ViPendingCompleteAfterWait+0x64
fffff880`0371dbc0 fffff800`0356034a : 00000000`00000000 ffbbbfff`bffff7fd 00000000`00004000 ffffffff`ffffffff : nt!ViPendingWorkerThread+0x2c
fffff880`0371dc00 fffff800`032b0946 : fffff880`009e9180 fffffa80`03d0fb50 fffff880`009f3fc0 ffffffff`ffffffff : nt!PspSystemThreadStartup+0x5a
fffff880`0371dc40 00000000`00000000 : fffff880`0371e000 fffff880`03718000 fffff880`0371d8d0 00000000`00000000 : nt!KiStartSystemThread+0x16
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!ViPendingCompleteAfterWait+64
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 50e79935
STACK_COMMAND: .cxr 0xfffff8800371d1a0 ; kb
FAILURE_BUCKET_ID: X64_0x7E_VRF_nt!ViPendingCompleteAfterWait+64
BUCKET_ID: X64_0x7E_VRF_nt!ViPendingCompleteAfterWait+64
Followup: MachineOwner
---------
And it does not says that it is crashed within a driver verifier enabled environment, too. Anyway, as you said that you enabled driver verifier, I am depending that statement.
This crash dump somehow is not indicating any driver (system or third party) as the reason behind the crash. At the same time it is not very clear that it is a hardware driven BSOD.
A stop 0x1000007E and a stop 0x7E bears almost the same meaning. According to Carrona.org, STOP 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control,
Update the firmware of your SanDisk U100 128GB SSD.
The disc space left in C is somehow not very sufficient. Free up some space.
No code has to be inserted here.Back up some data to the external.
The display driver is very old.
Code:
fffff880`05a25000 fffff880`065e2660 igdkmd64 (deferred)
Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
Image name: igdkmd64.sys
Timestamp: Fri Oct 21 22:59:55 2011 (4EA1AC13)
CheckSum: 00BC8CF3
ImageSize: 00BBD660
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update the Intel HD Graphics Driver, either from our forum link, Latest Intel HD Graphics Driver for Windows 7, or You may get it from Intel Download Center.
Moreover, you may run the Intel (R) Driver Update Utility to auto detect the appropriate driver for your computer.
Some data in the event log indicates (though I dont know French ) the the computer is overheating. Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. In case, you may need to buy a cooling pad for it.
BIOS update is also needed here:
Code:
Version du BIOS/Date American Megatrends Inc. UX31E.210, 26/12/2011
Get the BIOS update from ASUS.
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
Stress test the CPU.
Hardware - Stress Test With Prime95
Scan the system for possible virus infection.
Download and install this version of Intel Rapid Storage.
Let us know when all the suggested changes are done and all the suggested tests are taken.