Getting BSOD's while playing several games

Welcome to SF Rico5924 :) .

The bugchecks are all 0x101, unfortunately this bug check code doesn't contain enough
information in the minidump file be analyzed fully.

Please upload the Kernel dump file using Dropbox or Skydrive, the file is located in the Windows directory
and is usually a few hundred Megabytes in size.

Code:

C:\Windows\MEMORY.dmp

• Read More

A few things to eliminate;
Test for thermals and stability:

• Download HWinfo and post a Screenshot of the sensors window, one at idle and another while putting load on the PC using Prime95 for the CPU side and Furmark for the GPU.
  
  • Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).
  
  
     Note

  It is not mandatory to run both tests simultaneously, although possible as long as the temperatures are under constant monitoring.

What is the make, model and age of your PSU?
Fill out this form and post back the result:

• Power Supply Calculator

Hi Rico, thanks for the file :).

The screenshots I was looking for are of the sensors window and not of the summary window
which is what you hae uploaded :\ .

Attachment 302091


As for the dump file, CPU cores 4&5 were hung so they didn't flush out their call stacks which means we
can't know what was being proccessed at the time of the crash, the surrounding cores have network
and security related drivers but is not to say that those are the cause just yet.

Despite being outdated I don't want to point any fingers just yet.

Code:

lmvm bcmwl664
Browse full module list
start             end                 module name
fffff880`04e47000 fffff880`05136000   bcmwl664   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\bcmwl664.sys
    Image name: bcmwl664.sys
    Browse all global symbols  functions  data

    Timestamp:        Fri Jan 22 05:30:58 2010

• Driver Reference Table - bcmwl664.sys

Code:

lmvm k57nd60a
Browse full module list
start             end                 module name
fffff880`05143000 fffff880`051a9000   k57nd60a   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\k57nd60a.sys
    Image name: k57nd60a.sys
    Browse all global symbols  functions  data

    Timestamp:        Tue Jun 08 14:40:13 2010

• Driver Reference Table - k57nd60a.sys

Please post back with a new set of screenshots using the procedure in post #2.

Thanks for the update :).

The main Voltages values displayed are a bit on the low side,
I will ask some of our hardware experts to take a look.

Attachment 302346

Your power supply should be very close to these with a light load. More system specs are needed.

+3.3V--- 3.296 V
+5V ---- 4.896 V
+12V --- 11.598 V

You can verify you voltage reading using this little free program. You can also use it to complete your specs.

http://www.piriform.com/speccy
By Brink
System Info - See Your System Specs

By Kari

Speccy - Publish Snapshot of your System Specs

Rico5924, Inyour system specs I didn't see the Brand, model and wattage of your PSU. I have always had trouble with HWinfo reading my voltage correct. Go into bios and give us the values for the +12V, +5V and +3.3V. ATX specifications are +/- 5%. If your +12V was at 10V, I doubt your computer would boot. I suspect the software is not reading it right.