Hi mitc69.
Stress test the Graphics Card using Furmark.Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.
Stress test the CPU. It saves the result as a .txt file in the prime95's folder. Upload the file for us.
Test your RAM modules for possible errors. Run memtest86+ for at least 8 consecutive passes.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
Also let us know the wattage of the installed PSU.
Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .
________________________________________________
Code:
BugCheck 116, {fffffa8012eed010, fffff88005c005d4, 0, 2}
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1405d4 )
Followup: MachineOwner
---------
Code:
BugCheck 124, {0, fffffa800ddee028, bf800000, 200401}
Probably caused by : GenuineIntel
Followup: MachineOwner
---------
Quote