Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Still getting BSOD even after re-installing windows

03 Aug 2015   #1
IMDMANx

California
 
 
Still getting BSOD even after re-installing windows

Hello I've been getting lots of bsods for the past 2-3 years and I think its time to get them solved. I've upgraded the graphics card, power supply and RAM but I don't think it's a hardware issue as I don't get them when going into safe mode. I've ran sfc /scannow and chkdsk /r but it has not made a difference. Also ran MemTest86+ for 8 passes and found no errors.

Specs:

Processor: AMD Athlon Dual Core Processor 4450e
Video Card: NVIDIA GeForce GT 630
Memory: 2.1 GB
Operating System: Microsoft Windows 7 Professional Edition Service Pack 1 (build 7601), 32-bit

Any help would be greatly appreciated.


My System SpecsSystem Spec
.
06 Aug 2015   #2
Laith

Windows 10 Professional x64
 
 

Hiya and welcome to SevenForums!
Code:
BugCheck A, {452d728d, 2, 1, 828e6e91}

Probably caused by : memory_corruption ( nt!MiIdentifyPfn+1ed )
Code:
BugCheck 1A, {41284, a9cce001, 3589, 88e00000}

Probably caused by : memory_corruption ( nt!MiLocateWsle+c1 )
Code:
BugCheck 1A, {41287, 24, 0, 0}

Probably caused by : ntkrpamp.exe ( nt!KiTrap0E+dc )
Code:
BugCheck 19, {3, 82b3eac8, 822362c0, 82b3eac8}

*** WARNING: Unable to verify timestamp for SYMEVENT.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT.SYS
Probably caused by : SYMEVENT.SYS ( SYMEVENT+df25 )
I see my archenemy in the bugchecks, 0x19. Anyways let's get to troubleshooting

Uninstall Norton and install MSE for testing purposes. Run this for uninstalling Norton: Norton/Symantec - Uninstall Completely

Run sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.

SFC /SCANNOW Command - System File Checker

Run MemTest86+ for 8 passes. It must be MemTest86+. RAM - Test with Memtest86+
My System SpecsSystem Spec
22 Aug 2015   #3
IMDMANx

California
 
 

Updated dmps and added specs.
My System SpecsSystem Spec
.

22 Aug 2015   #4
Laith

Windows 10 Professional x64
 
 

Have you done what i gave you?
My System SpecsSystem Spec
22 Aug 2015   #5
IMDMANx

California
 
 

Yes I ran memtest86+ for 8 passes and found no errors. Also ran sfc /scannow and chkdsk /r but I still get blue screens.
My System SpecsSystem Spec
22 Aug 2015   #6
Laith

Windows 10 Professional x64
 
 

Have you installed the latest updates from windows update?
My System SpecsSystem Spec
22 Aug 2015   #7
ZeldaYoshi

Windows 7 Home Premium 64-bit
 
 

If nothing you try is working to fix it, then it must have something to do with your motherboard or hard drive or even something else inside your computer that need to be replaced.
My System SpecsSystem Spec
22 Aug 2015   #8
Laith

Windows 10 Professional x64
 
 

Now hold on ZeldaYoshi, that's why we run tests to see if something is failing or not.
My System SpecsSystem Spec
22 Aug 2015   #9
ZeldaYoshi

Windows 7 Home Premium 64-bit
 
 

Quote   Quote: Originally Posted by Laith View Post
Now hold on ZeldaYoshi, that's why we run tests to see if something is failing or not.
I didn't say it was the problem. I said it is possible it could be.
My System SpecsSystem Spec
22 Aug 2015   #10
Laith

Windows 10 Professional x64
 
 

I know you didn't, it is probably the case this time, we'll just have to wait and see.
My System SpecsSystem Spec
Reply

 Still getting BSOD even after re-installing windows




Thread Tools




Similar help and support threads
Thread Forum
BSOD while installing Windows
HI, I've made a new custom setup that will serve as media center but whan attempting to install windows 7 home prem 32bit i run into a BSOD. This occurs right after windows loaded the files for installation and showing me te windows logo. No windows is installed previous to this one so no...
BSOD Help and Support
BSOD After Installing windows 7
Hello, Yesterdya I had windows 8.1. I started getting messeges that my video driver stopped and recovered(with freezes).First I restarted my computer several times.The problem persisted even in browsing.I reinstaled driver.The problem persisted.Than i installed windows 7.First thing that I did...
BSOD Help and Support
BSOD while installing Windows 7 x64
Hello, I've been struggling with a mysterious BSOD case for a month now and I need the community's help. I built my new PC two months ago and it has been running just fine for one month. A month ago I experienced my first BSOD while playing Battlefield 4 (I don't have the error codes,...
BSOD Help and Support
BSOD when installing windows seven
I have a vista installation and a vista recovery partition. I am trying to install windows 7 home on my laptop (vaio VGN-FW35G). I formatted drive C. When installing windows 7 using CD I get the blue screen. Can anybody help me with this? I should note that installing windows vista using...
Installation & Setup
BSOD on installing Windows 7
Hi all, i have just built my second pc using windows 7. On first power up i can get into the bios ok, i installed windows 7 64bit and it rebooted automatically to the BSOD info on screen *** STOP: 0x00000116 *** nvlddmkm.sys - address FFFFF880490c6c0 base at fffff8800483c000, datestamp...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:15.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App