Cant install SP1 RC win7

[Kuss]

ok thanks

 

[Kuss]

i got the first one ill get the second one now and let you know what happens

 

[Kuss]

i get a message that it is not applicable to my system with this one kb947821

 

[tw33k]

You need to find and install the right version for your system. Your specs say you're running x64 so you want windows6.1-KB976932-X64.exe This is the RTM. You don't need to wait for Windows update because it's already available

 

[Bill2]

Jeez, hang on, are your system specs accurate? If yes, you are using pre-RTM builds of win7! Where did you get your copy of win7 from?

 

[tw33k]

Well spotted. My bad. It's Vista x64. lol

OP looks like you don't even have Windows 7 RTM

 

[Kuss]

friend of mine give it to me last year or befor i was on vista 64x

 

[Bill2]

OK, its like this. You dont have RTM win7, you just have the pre-RTM builds that leaked from time to time before win7 was finally, officially released by MS. So first thing, buy a genuine copy of win7 from a reputed dealer. Make sure you dont purchase from dubious sources, they may look very cheap are actually fakes that'll suddenly turn non-genuine one day.

And dont go by what your friend says blindly. If you're not confident, hang around on this forum and ask questions.

 

[Kuss]

ok will do ill look for one now ty

 

[niemiro]

Hello all!

@Kuss PMed me in relation to this post, and one of my previous posts. I wouldn't normally do this, but there is a big piece of important information which needs to become public. Here is my response:

HI Niemiro

iv been looking around the forums and the web trying fix my problem and came across the thread ( Security Updates Fail [80071A91] after image restore )

i got the same problem with the ATi drivers but im trying to install Windows 7 SP1.

iv checked the Checksur log and got the same as ikjadoon should i do what you said in the post or not?

Thanks Kuss

Hello Kuss!

Sadly, these sorts of issues are usually subtly different. If you create a new thread for me, I will happily check it out, though. Please post your CheckSUR.log, and reply to this PM with a link to your new thread, and I will happily assist you.

Thanks for taking the time to do this for me!

Just had a look. You have created a new thread. I think your pre-release 7 is not quite compatible with pre-release 7SP1, I am afraid.

Really sorry that I could not be of more help.

Feel free to ask me any questions!

Richard its not a pre-release i pay for it lastyear when i had my computer built in august i i asked my friend who was building it in the shop.

iv done the (C:\pack C:\ /e/is last night and that worked but i still get an error in the log file about ATI-AMD


No drivers found to block
No drivers found to warn Driver directory C:\Windows\System32\DriverStore\FileRepository\atiilhag.inf_amd64_neutral_951c1812f542740a is missing
(CSPInstall::CompatibilityApplicabilityScan:1468)Inbox Driver check failed hr=0x800f0a13
Ending Compatibility\Applicability scan
(PerformSPInstallation:833)Failed to install SP using UI hr=0x800f0a13
: (wmain:1105)Failed to perform SP installation hr=0x800f0a13
Reporting Failed event
SPInstall terminating, return code 0x800f0a13
(SPIRegQueryStringValue:700)Failed to query registry value: MiscString2 er=0x2
(CSystem::GetMachineName:395)Failed to query machine name from RAC hr=0x80070002
Deleting directory: C:\9d0b578c9eeb113e7cfa445a73a1\e190c7dce355e57eb147. ret=2

Can I please just draw attention to my statement in this post:

NOTE: This fix was created specifically for this user. If you are not this user, DO NOT follow these instructions, but instead create a new thread and have one made specifically for you

If you had exactly the same CheckSUR.log, it may have caused minimal harm, but they can't have been exactly the same (from other logs as well), as not all of the issues have been solved. I will do my absolute best, I will try as hard as I can, and this goes to everybody, but I can guarantee no results (not that any of us ever can)

@Kuss: Do you know exactly whether this is pre-release or not? I am very unfamiliar with WAT, pre-release, and W7. Hopefully someone better than me will help me out (please )

It sounds as though your Packs will be very similar to my other post's. I will likely base off it. However, until I can check, I would recommend a System Restore before it gets too late, just to try to avoid repercussions later. http://www.sevenforums.com/tutorials/700-system-restore.html

After that, please upload your logs as I asked ikjadoon:

Please re-try Windows Update. This puts the error at the end of all the logs, and makes my job easier. At the very least, you *MUST* have tried these updates within the last 24 hours, because some of these tools only snip the last 24 hours - for that is what I have told them to do. 24 hours is exact. lol. 24 hours and a few nanoseconds will be fine, as long as it doesn't round up the milisecond, which is the accuracy that the logs go to! lol. Too in depth!

NOTE TO OTHER USERS: The fixes for these diagnostic logs (below) are different for every computer, even with the same error code. You MUST post these logs in your own thread, and not follow any user specific fixes I post to this user. Thanks!

This applied the same to Vista and 7. Do not worry that it says Vista: Please run steps 1, 2A, 3 (about 15 minutes), 4, 5 from this tutorial System Files - SFC Command Don't worry about the logs for the time being. I have a very good reason for not asking for them!

Download and run this tool: Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, for Windows 7, and for Windows Server 2008 R2 When it has finished installing the update, it is done!

When the above has completed, download and run FireGenUL: Altair Technologies Ltd. A console application will show on the screen for a few seconds.

Right, this has produces a log of logs for me. Please now upload them. To do this, create a new folder on your Desktop called LOGS. Navigate to C:\Windows\Logs and copy the entire CBS folder into your new LOGS folder. Navigate to C:\Windows\System32 and copy FireGenULReport.htm into your LOGS folder.

Close the LOGS folder, and right click on it > Send to > Compressed (zipped) folder. Upload that new zip file. Either upload it here, ideally, or if it is too big to Speedy Share or any other media sharing website. Uploading here is always the ideal, if only because Speedy Share is blocked at my work place, so anyone uploading there would get a slower responce, waiting for me to finish work, if I was not on holiday!

Thanks, and good luck!

Richard

P.S. I know there is a lot here. Take care!

After that, I will be more than happy to assist you! Thank you so much for taking the time to do this!

Richard

 

[niemiro]

ok i found the problem Driver Sweep have taken out 2 files from the C:\Windows\System32\DriverStore\FileRepository


atiilhag.inf_amd64_neutral_951c1812f542740a

atiilhag.inf_amd64_neutral_951c1812f542740a.dbs
and now i cant place them back in as i get destination folder access denied

Hello!

If you provide me with the logs, I will do my best to help you.

Thanks!

Richard

 

[Kuss]

its ok now iv fixed it and now i can install SP1 well i hope so lol

I had to take permission of C:\Windows\System32\DriverStore\FileRepository and place the files there and its worked

if needed the tut for doing so

http://www.vistax64.com/tutorials/67717-take-ownership-file.html

 

[niemiro]

Hello!

That is good news, but there was a reason why I didn't just send you that tutorial. Winsxs and Stores are VERY picky about permissions. At the very least, you should be setting back Trusted Installer, however, my worry is that now permissions, versioning, and corruption issues, plus whatever else Driver Sweeper has done. I would so strongly recommend that you perform a System Restore, and just re-do these last few actions the correct way, so that you don't run into Clean-Install type issues over the coming months. Before it gets too late, now is your only, only chance. Please?

http://www.sevenforums.com/tutorials/700-system-restore.html

I would also not recommend Driver Sweeper, as you have now seen first hand the mess it has got your system into.

Thanks!

Richard

 

[Johnathan Lyman]

Hello!

That is good news, but there was a reason why I didn't just send you that tutorial. Winsxs and Stores are VERY picky about permissions. At the very least, you should be setting back Trusted Installer, however, my worry is that now permissions, versioning, and corruption issues, plus whatever else Driver Sweeper has done. I would so strongly recommend that you perform a System Restore, and just re-do these last few actions the correct way, so that you don't run into Clean-Install type issues over the coming months. Before it gets too late, now is your only, only chance. Please?

http://www.sevenforums.com/tutorials/700-system-restore.html

I would also not recommend Driver Sweeper, as you have now seen first hand the mess it has got your system into.

Thanks!

Richard

I second that. I've (tried) to follow as much as I can and see if I can provide my two cents.

I am going to be blunt, because that's what I do. Hate me if you wish. I'll sleep just fine, tonight.

I see so much crap about to hit the fan. First, we still haven't confirmed that you are running a completed version of Windows 7. That in itself is a huge issue when it comes to Windows Updates or ANYTHING that Microsoft releases to the public for Windows.

Second, you're going WAY outside the scope of ANY fix that would take place to install Service Pack 1. If SP1 does not want to install for WHATEVER reason, you better believe it has a damn good reason. If you get errors, there's a reason for it. the SP1 installer is smart enough to know if it has permission to do what it has to do.

Third, changing permissions for a folder is one thing... but A core system folder is like swimming in a shark tank while bleeding from the neck. It will cause problems down the road, I will bet you loads of cash in any currency you want.

I 100% back up Richard (Niemiro) when he says to seriously just wipe it and start over... doing it the right way. Richard knows what the hell he's talking about. I PROMISE you will have more problems in the future.

Thanks!

 

[karlsnooks]

Kuss,

We are here to help those with legitimate copies of Windows 7.

Please install a legitimate copy of Windows 7.

Karl

 

[nWo]

question, where can one download the service pack 1 for windows 7 32-bit...

 

[profdlp]

question, where can one download the service pack 1 for windows 7 32-bit...

From Microsoft, as soon as they release it.

 

[nWo]

thanks dude! i guess we wait

 

[Kuss]

Kuss,

We are here to help those with copies of Windows 7.

Please install a legitimate copy of Windows 7.

Karl

it is a legitimate copy the computer was built in a computer shop to my specs and i addded £146 on top for software, permissions are back to normal to but i dont like SP1 because my Z Engine dont work

 

[karlsnooks]

WIN | Pause/Break key | Enter

In the bottom right-hand side of the screen do you see this?