0x8007045D - Windows Won't install

[csoyen]

Hi,

Today I decide to make a clean install of Windows.

Boot from DVD and try to install ... when goes to 25 - 50% give me this error: 0x8007045D

Telling me that are broken files (whatever). I try with a different DVD but the result is the same.

I need to work and I can't install Windows.

Someone can help me?

Regards,

cs.oyen

 

[DocBrown]

You might read our Questions list for help with installs

:ar: http://www.sevenforums.com/installa...-use-help-installation-issues.html#post300660

 

[Bare Foot Kid]

Hello cs.oyen.

The first thought, if the Windows 7 install disk is one you burned yourself it may be a bad burn and needs to be done again, if so this would be the first thing to try.

Use the free ISO burner at the link below to burn another at a speed of now more than 4x and select to let the program to verify the disk before it finishes.

ImgBurn Free ISO Burning Software


If there is nothing on the Hard Disk Drive that you need to save, it would be helpful to do a wipe (secure erase) of the entire HDD to get the best possible space to install Windows to.

SSD / HDD : Optimize for Windows Reinstallation



Be sure to post back with any further questions you may have and to keep us informed.

 

[csoyen]

Hi,

I try many ways. Try to install Ubuntu and not working.

Run test for HDD and RAM and no problems found.

I don't know what need to do :S

 

[pugster]

What kind of motherboard/hard drive/video card/memory do you have? I had an gigabyte 965p-s3 motherboard (with dual controllers) which was a pain for me to install.

 

[theog]

Hello cs.oyen.

The first thought, if the Windows 7 install disk is one you burned yourself it may be a bad burn and needs to be done again, if so this would be the first thing to try.

Use the free ISO burner at the link below to burn another at a speed of now more than 4x and select to let the program to verify the disk before it finishes.

ImgBurn Free ISO Burning Software


If there is nothing on the Hard Disk Drive that you need to save, it would be helpful to do a wipe (secure erase) of the entire HDD to get the best possible space to install Windows to.

SSD / HDD : Optimize for Windows Reinstallation



Be sure to post back with any further questions you may have and to keep us informed.

Did you read the above post.
All Linux code must be deleted.As you have had linux on the HD you need do a Clean all & full format.

http://www.sevenforums.com/tutorials/52129-disk-clean-clean-all-diskpart-command.html
http://www.sevenforums.com/tutorials/2668-partition-volume-delete.html?ltr=P
http://www.sevenforums.com/tutorials/2674-partition-volume-create-new.html?ltr=P
http://www.sevenforums.com/tutorials/71432-partition-mark-active.html?ltr=P
Try a full clean & full format in command prompt.
1) Boot DVD & Press Shift+F10 (for command prompt)
2) Boot DVD, & http://www.sevenforums.com/tutorials/682-command-prompt-startup.html
(for command prompt)

Type in command line
DISKPART
LIST DISK
SELECT DISK # (win HD)
CLEAN ALL
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT fs=NTFS
ASSIGN
EXIT
EXIT

http://www.sevenforums.com/tutorials/91339-ssd-hdd-optimize-windows-reinstallation.html

 

[Jacee]

Unplug any USB devices, if any are plugged in.

 

[casiopea]

Hello cs.oyen.

The first thought, if the Windows 7 install disk is one you burned yourself it may be a bad burn and needs to be done again, if so this would be the first thing to try.

Use the free ISO burner at the link below to burn another at a speed of now more than 4x and select to let the program to verify the disk before it finishes.

ImgBurn Free ISO Burning Software


If there is nothing on the Hard Disk Drive that you need to save, it would be helpful to do a wipe (secure erase) of the entire HDD to get the best possible space to install Windows to.

SSD / HDD : Optimize for Windows Reinstallation



Be sure to post back with any further questions you may have and to keep us informed.

Hi! I´m having this same problem, I´ve already formatted my HDD, and tried the installation with two different versions of WIN7 and keep receiveng the same error, any clues?

thanks!

 

[Bare Foot Kid]

Hello cs.oyen.

The first thought, if the Windows 7 install disk is one you burned yourself it may be a bad burn and needs to be done again, if so this would be the first thing to try.

Use the free ISO burner at the link below to burn another at a speed of now more than 4x and select to let the program to verify the disk before it finishes.

ImgBurn Free ISO Burning Software


If there is nothing on the Hard Disk Drive that you need to save, it would be helpful to do a wipe (secure erase) of the entire HDD to get the best possible space to install Windows to.

SSD / HDD : Optimize for Windows Reinstallation



Be sure to post back with any further questions you may have and to keep us informed.

Hi! I´m having this same problem, I´ve already formatted my HDD, and tried the installation with two different versions of WIN7 and keep receiveng the same error, any clues?

thanks!

Reply here

Please don't double post.