BSOD very often, Dell windows 7 ultimate 32 bit, 2gb ram, dual core.

[pklocus]

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: 8FBF1000
BCP2: 00000000
BCP3: 9165FCBD
BCP4: 00000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\011612-29998-01.dmp
C:\Users\Justice\AppData\Local\Temp\WER-92009-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

 

[pklocus]

"Resource monitor":

Symptom: Failure using the VxD loader.
Cause: A device has a configuration problem that prevents it from working properly.
Details: The device, CD-ROM Drive, is reporting "tv_ConfigMgrErr19". This device will not be available until the issue is resolved. The Plug and Play ID for this device is IDE\CDROMTSSTCORP_DVD-ROM_TS-H353B_______________D200____\5-228BED3A-0-1.0.0.
Resolution: 1. Verify the correct driver is installed.
2. Try updating the drivers using Windows Update.
3. Check with the manufacturer for an updated driver.
4. Attempt to uninstall and then reinstall the device using Device Manager.
Related: Explanation of Error Codes Generated by Device Manager
Manage Devices in Windows

--------------------------------------------------------------------------------

Symptom: Failure using the VxD loader.
Cause: A device has a configuration problem that prevents it from working properly.
Details: The device, CD-ROM Drive, is reporting "tv_ConfigMgrErr19". This device will not be available until the issue is resolved. The Plug and Play ID for this device is IDE\CDROMTSSTCORP_DVD-ROM_TS-H353B_______________D200____\5-228BED3A-0-1.0.0.
Resolution: 1. Verify the correct driver is installed.
2. Try updating the drivers using Windows Update.
3. Check with the manufacturer for an updated driver.
4. Attempt to uninstall and then reinstall the device using Device Manager.
Related: Explanation of Error Codes Generated by Device Manager
Manage Devices in Windows

 

[pklocus]

More resource monitor:

OS Checks Passed Checks for attributes of the operating system
Test Groups Tests Failed Description
OS Version Check 1 0 Passed


Disk Checks Passed Checks for disk status
Test Groups Tests Failed Description
SMART Predict Failure Check 1 0 Passed
Logical Disk Dirty Bit Check 1 0 Passed


Security Center Tests Passed Checks for state of Security Center related information.
Test Groups Tests Failed Description
User Account Control Enabled Check 1 0 Passed
Windows Update Enabled Check 1 0 Passed


System Service Checks Passed Checks for state of system services
Test Groups Tests Failed Description
Abnormally Terminated Services Check 1 0 Passed
Workstation Service Check 1 0 Passed


Hardware Device and Driver Checks Failed Survey of Windows Management Infrastructure supported devices

 

[pklocus]

JCGRIFF2 ZIP FILE:
Windows_NT6_BSOD_jcgriff2.zip

 

[pklocus]

I need a reply please,

 

[seavixen32]

You'll stand a better chance of some help from our BSOD experts if you follow this tutorial: http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html

 

[pklocus]

You'll stand a better chance of some help from our BSOD experts if you follow this tutorial: http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html

included the information thank you. Just out of order ?

 

[writhziden]

JCGRIFF2 ZIP FILE:
Windows_NT6_BSOD_jcgriff2.zip

Many of us do not like downloading from third party sites. In the future, if you could upload the .zip file on here, that would be fantastic.

See http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html if you are having difficulties uploading.

 

[writhziden]

Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\pklocus\Windows_NT6_BSOD_jcgriff2\122411-14757-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\users\mike\documents\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Machine Name:
Kernel base = 0x82a0a000 PsLoadedModuleList = 0x82b534d0
Debug session time: Sat Dec 24 15:48:29.736 2011 (UTC - 7:00)
System Uptime: 0 days 0:00:19.562
Loading Kernel Symbols
...............................................................
................................................................
......
Loading User Symbols
Loading unloaded module list
....
1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: 8dca9000, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 88dbbcbd, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 00000000, (reserved)

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for SbieDrv.sys
*** ERROR: Module load completed but symbols could not be loaded for SbieDrv.sys

Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from 82b73848
Unable to read MiSystemVaType memory at 82b52e20
 8dca9000 

FAULTING_IP: 
SbieDrv+8cbd
88dbbcbd f3a5            rep movs dword ptr es:[edi],dword ptr [esi]

MM_INTERNAL_CODE:  0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x50

CURRENT_IRQL:  0

TRAP_FRAME:  92497a64 -- (.trap 0xffffffff92497a64)
ErrCode = 00000000
eax=00000000 ebx=86255388 ecx=00000002 edx=00000022 esi=8dca9000 edi=862553b0
eip=88dbbcbd esp=92497ad8 ebp=92497b4c iopl=0         nv up ei pl nz na po nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010202
SbieDrv+0x8cbd:
88dbbcbd f3a5            rep movs dword ptr es:[edi],dword ptr [esi]
Resetting default scope

LAST_CONTROL_TRANSFER:  from 82a4b408 to 82a9840f

STACK_TEXT:  
92497a4c 82a4b408 00000000 8dca9000 00000000 nt!MmAccessFault+0x106
92497a4c 88dbbcbd 00000000 8dca9000 00000000 nt!KiTrap0E+0xdc
WARNING: Stack unwind information not available. Following frames may be wrong.
92497b4c 88dbcca2 88dcc878 88dcc8b4 88dbba08 SbieDrv+0x8cbd
92497b70 88db42d4 00000000 92497b8c 8622fa68 SbieDrv+0x9ca2
92497bfc 82a4158e 8622fb18 8620e470 8620e470 SbieDrv+0x12d4
92497c14 82c34a49 8622fa68 8620e470 8620e4e0 nt!IofCallDriver+0x63
92497c34 82c37c1b 8622fb18 8622fa68 00000000 nt!IopSynchronousServiceTail+0x1f8
92497cd0 82c7e4b4 8622fb18 8620e470 00000000 nt!IopXxxControlFile+0x6aa
92497d04 82a4821a 0000014c 00000000 00000000 nt!NtDeviceIoControlFile+0x2a
92497d04 778570b4 0000014c 00000000 00000000 nt!KiFastCallEntry+0x12a
00c1fb4c 00000000 00000000 00000000 00000000 0x778570b4


STACK_COMMAND:  kb

FOLLOWUP_IP: 
SbieDrv+8cbd
88dbbcbd f3a5            rep movs dword ptr es:[edi],dword ptr [esi]

SYMBOL_STACK_INDEX:  2

SYMBOL_NAME:  SbieDrv+8cbd

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: SbieDrv

IMAGE_NAME:  SbieDrv.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4d8b29aa

FAILURE_BUCKET_ID:  0x50_SbieDrv+8cbd

BUCKET_ID:  0x50_SbieDrv+8cbd

Followup: MachineOwner
---------

If you are overclocking any hardware, please stop.

I note that you have Avira and Malwarebytes on your system. Having two security programs running at once is known to cause conflicts. Recommend removing Avira using the Uninstall a program feature in Control Panel and then using Avira RegistryCleaner - Download to cleanup afterward.

Your blue screen crashes are caused by Sandboxie, but may be related to Avira.

See if uninstalling Avira resolves the conflict; if not, remove Sandboxie. If you want the security provided by sandboxie, post a thread in System Security to find a program that causes less conflicts.
​

Please update the following drivers.

e1e6032	8eb92000	8ebca000	Tue Mar 24 12:16:11 2009 (49c9236b)	0003ff3e		e1e6032.sys
atikmdag	8e62f000	8ea83000	Fri Apr 24 04:50:20 2009 (49f1996c)	00402d61		atikmdag.sys

You may use the following sites as references for finding drivers. We recommend finding the manufacturer of the driver and downloading drivers directly from the manufacturer or software developer. If you have trouble finding a driver or driver manufacturer, let us know and we will do our best to assist you. If you need help, please provide the device name, manufacturer, and the driver .sys file that you are looking for.

1. Driver Reference is a good site to find the driver .sys files, their descriptions, and the site most likely to contain an update.
2. Driver Search Methods provides driver manufacturers and links to their homepages.

There are a few methods for updating drivers.

1. http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html
2. http://www.sevenforums.com/tutorials/99402-driver-install-add-hardware-wizard.html
3. http://www.sevenforums.com/tutorials/97061-driver-install-device-manager.html

To fully re-install a driver, use the following steps.

1. Click Start Menu
2. Right Click My Computer/Computer
3. Click Manage
4. Click Device Manager from the list on the left
5. Find the device you are trying to uninstall by expanding the appropriate set of devices
6. Right click the device
7. Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
8. Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
9. Restart your computer
10. Install the latest driver for the device once Windows starts.

Alternatively:

1. Login as an adminstrative user.
2. Click Start Menu
3. Click Control Panel
4. Click Hardware and Sound
5. Click Device Manager (the last link under Devices and Printers)
6. Find the device you are trying to uninstall by expanding the appropriate set of devices
7. Right click the device
8. Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
9. Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
10. Restart your computer
11. Install the latest driver for the device once Windows starts.