BSOD error after ~30 minutes on

[Arc]

In that case, dont need to run memtest again.

Update the display driver. If the BSODs even occur, we will guide you through the BIOS update; and it does not need any HDD formatting at all

 

[alien5555]

I still having BSOD event after updating the driver... here I attached the zip file... when BSOD it say cause by tcpip.sys and intelppm.sys...

 

[Arc]

Stress test the CPU.
Hardware - Stress Test With Prime95

As intelppm.sys is involved, this check is needed.

Tcpip.sys error may cause due to various reasons. Will get home back within two hours and will check what is there behind the tcpip.sys failure.

 

[alien5555]

thanks you... i will do the test and post the result later on...

 

[x BlueRobot]

[COLOR="red"]BugCheck D1[/COLOR], {0, 2, 1, fffff8800165dd72}

*** WARNING: Unable to verify timestamp for JME.sys
*** ERROR: Module load completed but symbols could not be loaded for JME.sys
Probably caused by : [COLOR="Red"]JME.sys[/COLOR] ( JME+11026 )

2: kd> [COLOR="SeaGreen"]lmvm JME[/COLOR]
start             end                 module name
fffff880`04263000 fffff880`0427e000   JME      T (no symbols)           
    Loaded symbol image file: JME.sys
    Image path: \SystemRoot\system32\DRIVERS\JME.sys
    Image name: JME.sys
    Timestamp:        [COLOR="red"]Fri Aug 14 07:35:51 2009 [/COLOR](4A8505C7)
    CheckSum:         0001E6EE
    ImageSize:        0001B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Your JMicron PCI Express Gigabit Ethernet Adapter driver seems to be causing some problems, and is very outdated, this may also be the cause behind the TCPIP.sys being referenced in one of the BSODs.

Here's some additional information:

• Driver Reference Table

Update from here - Driver

 

[Arc]

Cheers, my friend !!!!
It is the thing behind the tcpip.sys error, and you found it rightly

I would also suggest to update ELAN PS/2 Port Smart Pad driver.

fffff880`02c9d000 fffff880`02cbf000   ETD      T (no symbols)           
    Loaded symbol image file: [URL="http://www.carrona.org/drivers/driver.php?id=ETD.sys"]ETD.sys[/URL]
    Image path: \SystemRoot\system32\DRIVERS\[URL="http://www.carrona.org/drivers/driver.php?id=ETD.sys"]ETD.sys[/URL]
    Image name: [URL="http://www.carrona.org/drivers/driver.php?id=ETD.sys"]ETD.sys[/URL]
    Timestamp:        [COLOR=Red]Thu Oct 15 14:53:18 2009[/COLOR] (4AD6EA06)
    CheckSum:         00023C0B
    ImageSize:        00022000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

It is causing all the i8042prt errors here. Update it from ELAN Microelectronics Corp.

Update your ATI/AMD display driver.

fffff880`04801000 fffff880`053b4000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
[COLOR=Red]    Image name: atikmdag.sys
    Timestamp:        Sat Nov 17 01:48:02 2012[/COLOR] (50A69F7A)
    CheckSum:         00B65E3C
    ImageSize:        00BB3000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

You can get it from the link in our forum, http://www.sevenforums.com/graphic-...alyst-video-driver-windows-7-a.html#post17671, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.

During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

Let us know the results.

 

[x BlueRobot]

Your welcome Archie and good work with the other drivers

 

[Arc]

As we say, we are a team, The BSOD Team

 

[x BlueRobot]

As we say, we are a team, The BSOD Team

 

[alien5555]

[COLOR="red"]BugCheck D1[/COLOR], {0, 2, 1, fffff8800165dd72}

*** WARNING: Unable to verify timestamp for JME.sys
*** ERROR: Module load completed but symbols could not be loaded for JME.sys
Probably caused by : [COLOR="Red"]JME.sys[/COLOR] ( JME+11026 )

2: kd> [COLOR="SeaGreen"]lmvm JME[/COLOR]
start             end                 module name
fffff880`04263000 fffff880`0427e000   JME      T (no symbols)           
    Loaded symbol image file: JME.sys
    Image path: \SystemRoot\system32\DRIVERS\JME.sys
    Image name: JME.sys
    Timestamp:        [COLOR="red"]Fri Aug 14 07:35:51 2009 [/COLOR](4A8505C7)
    CheckSum:         0001E6EE
    ImageSize:        0001B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Your JMicron PCI Express Gigabit Ethernet Adapter driver seems to be causing some problems, and is very outdated, this may also be the cause behind the TCPIP.sys being referenced in one of the BSODs.

Here's some additional information:

• Driver Reference Table

Update from here - Driver

Thanks a lot both of you... but I cannot download the driver from there..

 

[alien5555]

Cheers, my friend !!!!
It is the thing behind the tcpip.sys error, and you found it rightly

I would also suggest to update ELAN PS/2 Port Smart Pad driver.

fffff880`02c9d000 fffff880`02cbf000   ETD      T (no symbols)           
    Loaded symbol image file: [URL="http://www.carrona.org/drivers/driver.php?id=ETD.sys"]ETD.sys[/URL]
    Image path: \SystemRoot\system32\DRIVERS\[URL="http://www.carrona.org/drivers/driver.php?id=ETD.sys"]ETD.sys[/URL]
    Image name: [URL="http://www.carrona.org/drivers/driver.php?id=ETD.sys"]ETD.sys[/URL]
    Timestamp:        [COLOR=Red]Thu Oct 15 14:53:18 2009[/COLOR] (4AD6EA06)
    CheckSum:         00023C0B
    ImageSize:        00022000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

It is causing all the i8042prt errors here. Update it from ELAN Microelectronics Corp.

Update your ATI/AMD display driver.

fffff880`04801000 fffff880`053b4000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
[COLOR=Red]    Image name: atikmdag.sys
    Timestamp:        Sat Nov 17 01:48:02 2012[/COLOR] (50A69F7A)
    CheckSum:         00B65E3C
    ImageSize:        00BB3000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

You can get it from the link in our forum, http://www.sevenforums.com/graphic-...alyst-video-driver-windows-7-a.html#post17671, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.

During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

Let us know the results.

From the ELAN website it says that need to go to system manufacturer's website.. then I go to asus website and select my model laptop but then the driver there same as my driver which mean outdated from year 2009..where else I can find the updated driver??

The display driver I had updated it..but the auto detect driver update it to 2012 driver... do I need to update it to the 2013 driver as shown in this forum??

 

[Arc]

Scroll down to the bottom of the page.... click on "Download.
In the resulting page, Click on "Ethernet"
In the resulting page, click on "Windows"
In the resulting page, get the bottom most one.

Then tell us what is the situation

 

[alien5555]

When I click download from this Driver website, It lead me to this

 

[Arc]

Failure from Chrome's part.
Try another browser. I can access that page using waterfox and IE9.

 

[alien5555]

Failure from Chrome's part.
Try another browser. I can access that page using waterfox and IE9.

Now I know why...the website been block by my college server...
I able to download it now by using broadband...

And how about the ELAN driver... in the website you give me just now :
Q: Where can I download the Elan's driver?
Please download it from your system manufacturer's website.

and then I go to asus website but then I dont know which one to download.. I find out that the driver for my laptop model is not updated in asus website..

and 1 more.. the display driver do I need to update until the new one which stated in the forum which is:
BETA 2
Release Date: March 15th 2013
Version: 13.3
In Device Manager: 12.100.17.0

I already update the display driver using automatic detect in the AMD website which the date is on 11/16/2012

 

[Arc]

Get the latest WHQL of the display driver, not the beta.

Try to get the other two drivers when you are out of the college server ..... that's something that I cannot help .... you have to get the drivers yourself, we can point you out the source.

 

[alien5555]

I cant find any download link from ELAN Microelectronics Corp.

 

[Arc]

Search for the touchpad driver in your computer manufacturer's website then.... there must be some updates.

 

[VistaKing]

Hi alien

May I get the serial or model number of your PC. Do the steps below

:ar: To get the serial number enter this command

wmic bios get serialnumber

:ar: To get the model number enter this command

wmic computersystem get oemstringarray

 

[x BlueRobot]

Have you updated the Ethernet driver yet?

If not, then follow these steps:

1. Download Driver - Driver
2. Scroll to the bottom of the page (Download Link)
3. Click Download
4. Select the Ethernet link
5. View attachment 259952