Official Seven Forums Overclock Leader boards

[ganjiry]

Yes Ryan, I think I'll leave them alone.

Maybe.

I don't blame you mate

 

[Britton30]

No, only the pic I posted earlier after the lapping was done. The TIM was a light tan chalky substance that rubbed off with my finger tip. The die is about 5/16th" wide and maybe 7/8th" long and very thin, maybe less than 1mm

 

[AddRAM]

If you just slap some quality paste on it then put it in the pc, it would run much cooler, when I build my daughter`s new rig I`ll do it to my 3570k and see how it does.

It`s a shame you nicked it

 

[Britton30]

I think what I did wrong was trying to use the corner of the blade to get under the IHS on the first corner. You should use the center of the blade's edge and rock it back and forth.

 

[ganjiry]

I think what I did wrong was trying to use the corner of the blade to get under the IHS on the first corner. You should use the center of the blade's edge and rock it back and forth.

That sounds pretty likely and easily done chap...Have a couple of beers and forget it instead of kicking yourself though

 

[paulpicks21]

I think what I did wrong was trying to use the corner of the blade to get under the IHS on the first corner. You should use the center of the blade's edge and rock it back and forth.

That sounds pretty likely and easily done chap...Have a couple of beers and forget it instead of kicking yourself though

Good advice there, I will have a beer too to give the old gal the send off she deserves.

 

[ganjiry]

I think what I did wrong was trying to use the corner of the blade to get under the IHS on the first corner. You should use the center of the blade's edge and rock it back and forth.

That sounds pretty likely and easily done chap...Have a couple of beers and forget it instead of kicking yourself though

Good advice there, I will have a beer too to give the old gal the send off she deserves.

:roflmao:
I'll smoke a fat one on your behalf Gary

 

[Solarstarshines]

I think what I did wrong was trying to use the corner of the blade to get under the IHS on the first corner. You should use the center of the blade's edge and rock it back and forth.

That sounds pretty likely and easily done chap...Have a couple of beers and forget it instead of kicking yourself though

Good advice there, I will have a beer too to give the old gal the send off she deserves.

Ditto Drink up

 

[Britton30]

Thanks Larry. Moe, and Curly. :roflmao:

 

[NoN]

Yep, just relax...
Nobody at least told, you were a hero deserving a medal for having save the whole world with your money lost on that chip!

 

[Britton30]

Oh I'm not mad, pissed, flustered, upset, remorseful, tense, sad, melancholy, up tight, morose, angry, or anything like that. I should be a little worried.

 

[paulpicks21]

Oh I'm not mad, pissed, flustered, upset, remorseful, tense, sad, melancholy, up tight, morose, angry, or anything like that. I should be a little worried.

Sometimes grief takes time to set in Gary, it could strike at any moment, be sure to have a bottle of Jack on standby :roflmao:

 

[Britton30]

What do you mean a bottle?

 

[AddRAM]

You guys will never believe it, but I couldn`t help myself, I had to ADD MORE RAM :roflmao:

 

[paulpicks21]

How much Ram are you rolling with now AddRAM? You can never have enough Ram AddRAM, well you know that, Ram is great isn't it, its great fun adding Ram isn't it AddRAM lol.

 

[Solarstarshines]

Thanks Larry. Moe, and Curly. :roflmao:

lol you're a stinker I just saw that

 

[Solarstarshines]

You guys will never believe it, but I couldn`t help myself, I had to ADD MORE RAM :roflmao:

Black and Blue I would of never seen that coming it looks mighty fine ADD-MORE-RAM lol aka AddRam

 

[paulpicks21]

Thanks Larry. Moe, and Curly. :roflmao:

lol you're a stinker I just saw that

Solar, have you been keeping an eye on your own thread, you know the one you started the 3d Mark 11 one? I had to update my own score as you are nowhere to be seen! Are you subscribed to it?

 

[Solarstarshines]

Thanks Larry. Moe, and Curly. :roflmao:

lol you're a stinker I just saw that

Solar, have you been keeping an eye on your own thread, you know the one you started the 3d Mark 11 one? I had to update my own score as you are nowhere to be seen! Are you subscribed to it?

I am but I just got in and checking other things I was at the DR

Any who I will try to keep a eye on it I noticed you edited out one of the 3dmark 11 scores before I did but I did come in after and finish putting others out there

I do tend to forget about this stuff with my daughter going to school been focused on that

 

[paulpicks21]

lol you're a stinker I just saw that

Solar, have you been keeping an eye on your own thread, you know the one you started the 3d Mark 11 one? I had to update my own score as you are nowhere to be seen! Are you subscribed to it?

I am but I just got in and checking other things I was at the DR

Any who I will try to keep a eye on it I noticed you edited out one of the 3dmark 11 scores before I did but I did come in after and finish putting others out there

I do tend to forget about this stuff with my daughter going to school been focused on that

You need to get your priorities straight Solar, Nothing and I mean Nothing is more important than a Leaderboard! It takes time, dedication and love to nurture the perfect Leaderboard, there is no place for half measures!

Of course I am joking, I am just messin with ya bud, Kids come first full stop