Show Us Your Rig [5]

[Britton30]

Seriously nice case Paul. You may send me your old one.

 

[Dude]

Paul, that really does look great I have been watching mine and with the psu in upside down it seemed to get a warm spot between the graphics card and hard drive cage. So I flipped the psu over, threw a fan in the bottom to draw in and turned the pump around. I think that should do the trick. When I get the better fans for the rad, I will add another fan up top for out take.

 

[paulpicks21]

Thanks Guys.

@Doug, I always have my PSU with the fan at the bottom, I think it's best that way, but as long as it's not gonna suck a load of dust in if it was on the floor say. My PC is up on top with me so it's fine. Looks good Doug anyway, nice cooler

 

[paulpicks21]

Seriously nice case Paul. You may send me your old one.

I certainly would have Gary, shame you don't live a little closer, I expect the shipping would cost more than buying a new case lol.

 

[ganjiry]

Paul, that really does look great I have been watching mine and with the psu in upside down it seemed to get a warm spot between the graphics card and hard drive cage. So I flipped the psu over, threw a fan in the bottom to draw in and turned the pump around. I think that should do the trick. When I get the better fans for the rad, I will add another fan up top for out take.

Thats one of the reason's i got rid of my Crabide 500r. The hot pocket behind the optical bay's was pretty darn hot man and i could feel it through the case, Psu was face down too. I'm thinking it's due to the gpu's chucking their exhausted heat through the right side of the card's

 

[Dude]

Paul, that really does look great I have been watching mine and with the psu in upside down it seemed to get a warm spot between the graphics card and hard drive cage. So I flipped the psu over, threw a fan in the bottom to draw in and turned the pump around. I think that should do the trick. When I get the better fans for the rad, I will add another fan up top for out take.

Thats one of the reason's i got rid of my Crabide 500r. The hot pocket behind the optical bay's was pretty darn hot man and i could feel it through the case, Psu was face down too. I'm thinking it's due to the gpu's chucking their exhausted heat through the right side of the card's

I thought it might be from the card but it never did it before. It started when I add the 920 as intake and the psu upside down. It is not hot, just warmer than the rest of the case. Maybe adding a fan pulling out up top might help. Who knows but I decided I didn't like the upside down setup

 

[andrew129260]

The hot pocket behind the optical bay's was pretty darn hot ....

As long as one of these wasn't inside your case, your probably fine.

 

[Dude]

The hot pocket behind the optical bay's was pretty darn hot ....

As long as one of these wasn't inside your case, your probably fine.

:roflmao: then I would come back with this

An Introduction To Extreme Cooling | Overclockers


So far it is working. I think the fan at the bottom made a difference as the psu was fan up for a while and when I added the 920 as intake is when it came about. I will still put another fan up top though.

 

[Boozad]

The hot pocket behind the optical bay's was pretty darn hot ....

As long as one of these wasn't inside your case, your probably fine.

That brings back some good memories of my time in Michigan. :drool:

 

[Dude]

The hot pocket behind the optical bay's was pretty darn hot ....

As long as one of these wasn't inside your case, your probably fine.

That brings back some good memories of my time in Michigan. :drool:

Good times in Michigan, here"s for you Boozad

 

[linnemeyerhere]

Using the car engine formula I will be designing a gaming set up for you all with I figure a 30-45 minute intense gaming session providing enough heat to cook your "Hot Pocket". A craddle attached to the GPU will hold the foil wrapped HP and a special software heat probe connected to the 4 pin headed will monitor heat and slow fans so maximum heat is placed to the HP for cooking. So what if the rig suffers some as the joy of cooking these cheese filled delights will over shadow any risk to components !

How To Cook on Your Car Engine

 

[linnemeyerhere]

As long as one of these wasn't inside your case, your probably fine.

That brings back some good memories of my time in Michigan. :drool:

Good times in Michigan, here"s for you Boozad

OK so name the Artist and Song that the Kid nicked this tune from ?

 

[essenbe]

I don't know the answer, Alan. But, I thought it was illegal to sing Sweet Home Alabama in Michigan.

 

[Dude]

That brings back some good memories of my time in Michigan. :drool:

Good times in Michigan, here"s for you Boozad

OK so name the Artist and Song that the Kid nicked this tune from ?

It has a London connection too

http://en.wikipedia.org/wiki/All_Summer_Long_(Kid_Rock_song)

 

[linnemeyerhere]

Ah but "Sweet home Alabama" is over what Artist and what song from same as the lyrics are just mashed over the top, great video and I've always like the "Kid" !

 

[Dude]

I linked wrong earlier, it's a mash up of Warren Zevon's "Werewolves of London", and Lynyrd Skynyrd's "Sweet Home Alabama"

"All Summer Long" is a song recorded by Kid Rock. It was released in 2008 as the third single from his seventh studio album Rock n Roll Jesus. The song samples two hit songs of the 1970s, Warren Zevon's "Werewolves of London", and Lynyrd Skynyrd's "Sweet Home Alabama"; the idea for the mashup was suggested by Mike E. Clark.[1] The song was a number-one hit in eight countries across Europe, Australia and the United Kingdom. It even crossed over to country music radio, giving Kid Rock his first top-ten country hit.[2] The song was the official theme song to WWE's pay-per view event, Backlash 2008. Also, the song was performed on the MTV music awards with rapper Lil Wayne in 2008.

 

[linnemeyerhere]

Winner Winner GPU Cooked Chicken Dinner !

 

[Dude]

:roflmao::roflmao::roflmao:

 

[boogieboy]

Awesome RIG! Paul

 

[paulpicks21]

Awesome RIG! Paul

Thank you boogieboy I was supposed to be fitting new lighting to it today, but the darn courier company messed up and it won't be delivered until Monday now. No big deal, it can wait.