Official Seven Forums Overclock Leader boards

[paulpicks21]

How is this possible? The minimum temp shown is 14C, which is about 57.4F, my ambient temp is 71F, 22C.

View attachment 288394

RMA

 

[essenbe]

It's not. It is software reading it and the software is notoriously wrong, especially at idle temps. It gets closer the higher the temp though. Thus, why I don't trust what we see as CPU temp.

 

[paulpicks21]

Just messing Gary, not too sure mate. You been messing with LN2?

 

[A Guy]

How is this possible? The minimum temp shown is 14C, which is about 57.4F, my ambient temp is 71F, 22C.

View attachment 288394

RMA

OMG

A Guy

 

[paulpicks21]

How is this possible? The minimum temp shown is 14C, which is about 57.4F, my ambient temp is 71F, 22C.

View attachment 288394

RMA

OMG

A Guy

It was a joke based on his RMA history Bill lol.

 

[NoN]

RMA

OMG

A Guy

It was a joke based on his RMA history Bill lol.

No, I just can't believe he's gonna delidded his core again..:sarc: (teasing)

By the way...
Today i spent four plain hours to clean the leftover flux residue on the back of my motherboard, 'cause some spotted sticky parts on edges, all along E/S plugs , Usb plugs and behind heatsinks, along some PCI-e_x. A two month old Mobo!

Used Isopropyl alcohol only and many many cotton buds that all cames pretty dirty from flux residue in that yellow brownish color, until the PCB have a glossy look. Brushed it with a toothbrush to remove cotton fibers as final.

I'm used cleaning with light alcohol parts of PCBs (mostly laptops back then) 'cause of dust & smoke area, but readed that some Overclockers do have also that manner for flux, in purpose of better oc'ing thing i wasn't totally aware before.

It tooks me more time than i thought!

 

[Britton30]

How is this possible? The minimum temp shown is 14C, which is about 57.4F, my ambient temp is 71F, 22C.

View attachment 288394

RMA

OMG

A Guy

:roflmao:

No, this CPU is what got me into the green section. Under prime the temps run from 76C-82C, so 6C difference. As Steve said idel temps aren't real accurate. I think it was Ryan who said at a temp 25C and less the accuracy goes away.

 

[kbrady1979]

I've had readings on mine of 17-19*C before and I can tell at about 24* and up it becomes much more accurate based on other components and room temp. Just a little buggy. Unless you've unlocked beast mode on your cooler and entered a phase change dimension while the flux capacitor was fluxing around the multi-dimensional vortex causing a paradigm shift of electrons to the adverse polarity of the rotational density of pi........you didn't do that, did you??

 

[Britton30]

I've had readings on mine of 17-19*C before and I can tell at about 24* and up it becomes much more accurate based on other components and room temp. Just a little buggy. Unless you've unlocked beast mode on your cooler and entered a phase change dimension while the flux capacitor was fluxing around the multi-dimensional vortex causing a paradigm shift of electrons to the adverse polarity of the rotational density of pi........you didn't do that, did you??

A little. I do have 2 Vortex fans on it rotating in parallel tachyon pulse width mode. I added a bit of a neutrino cascade fountain too.

 

[Dude]

I am taking notes for new OC methods

 

[Lava King]

I've had readings on mine of 17-19*C before and I can tell at about 24* and up it becomes much more accurate based on other components and room temp. Just a little buggy. Unless you've unlocked beast mode on your cooler and entered a phase change dimension while the flux capacitor was fluxing around the multi-dimensional vortex causing a paradigm shift of electrons to the adverse polarity of the rotational density of pi........you didn't do that, did you??

A little. I do have 2 Vortex fans on it rotating in parallel tachyon pulse width mode. I added a bit of a neutrino cascade fountain too.

Well, crud. Now I'm gonna hafta go dig out my Backward Wave Oscillator and Dual-Quad Traveling-Wave Tubes just to keep up with y'all.

Then I'll put in a call to the power generating station and tell 'em to standby, hold my beer, and watch *this*

:shock:

 

[Britton30]

Famous last words, "Hey y'all, watch this!".

 

[A Guy]

RMA

OMG

A Guy

It was a joke based on his RMA history Bill lol.

Of this I was aware

A Guy

 

[Solarstarshines]

My temps are low like that on first boot after 15- 20 min they are normal

 

[Dude]

I've had readings on mine of 17-19*C before and I can tell at about 24* and up it becomes much more accurate based on other components and room temp. Just a little buggy. Unless you've unlocked beast mode on your cooler and entered a phase change dimension while the flux capacitor was fluxing around the multi-dimensional vortex causing a paradigm shift of electrons to the adverse polarity of the rotational density of pi........you didn't do that, did you??

A little. I do have 2 Vortex fans on it rotating in parallel tachyon pulse width mode. I added a bit of a neutrino cascade fountain too.

Well, crud. Now I'm gonna hafta go dig out my Backward Wave Oscillator and Dual-Quad Traveling-Wave Tubes just to keep up with y'all.

Then I'll put in a call to the power generating station and tell 'em to standby, hold my beer, and watch *this*

:shock:

:roflmao::roflmao::roflmao::roflmao:

 

[AddRAM]

OK you guys are just being downright silly.

:focus:

1.21 Jigawatts !!!

Doc, what the hell is a Jigawatt ?

 

[Solarstarshines]

OK you guys are just being downright silly.

:focus:

1.21 Jigawatts !!!

Doc, what the hell is a Jigawatt ?

lol ,I thought he was talking about Jay-z Jigga what ???

 

[Dude]

Jiggawatt

 

[Solarstarshines]

Jiggawatt

Thanks for being serious I was being silly with my Jay-z reference

yeah but pretty much it's the same word with a j sound History does repeat itself apparently because people are pretty much reviving old words and spin them to sound current

 

[AddRAM]

Well if I put a G you might say it wrong like as in Gigabyte, but Doc says Jigawatt as in the jigsaw.