Official Seven Forums Overclock Leader boards [2]

[paulpicks21]

speaking of 50cent

I was thinking of that get rich or die trying lol

Sounds like what AMD is doing.

:roflmao:That's damn cold

Cold as Ice?

***Disclaimer, the following video contains a lot of swearing, and I mean a lot, if you are easily offended please don't click the link***

M.O.P - Cold as Ice - YouTube

 

[Britton30]

How hot does the new CPU get Tom? I ran this i5-2550K to 100C once and now, while it works OK, it won't run at over 4.6 stable. Prime shuts down 2-3 core within a minute. It's running with a Vcore of 1.464V.

Did I miss a post by someone called Tom that just got a new CPU Gary?

Oops!

So, how hot does it get Paul?.

 

[Dude]

I remember this version

 

[Solarstarshines]

I remember this version

Please don't do this to me Dude you will make me bust out Urgent ,The original bootycall song

 

[Dude]

 

[Britton30]

Do 50 Cent and Foreigner have overclocks to share?

 

[Solarstarshines]

Do 50 Cent and Foreigner have overclocks to share?

lol

 

[Dude]

I hope so, we are off topic

 

[Britton30]

Bazinga.

 

[AddRAM]

Back to OverClocking, and talking about OverClocking, and doing things that involve OverClocking !!!!!

(d)

 

[Britton30]

I can't get Prime to run on the i7-3770K system, workers stop after a few minutes. I've got it only at 4636MHz and Vcore up to 1.364V.

 

[Dude]

That can be tricky to figure out. Reset BIOS back to default and start making changes one by one and checking. Sometimes one setting will be something prime doesn't like. Or as a quick test bump up the vcore. I'm guessing you are running blend. Try small fft's and see if it will run.

 

[kbrady1979]

I can't get Prime to run on the i7-3770K system, workers stop after a few minutes. I've got it only at 4636MHz and Vcore up to 1.364V.

Have you bumped up the BCLK? If so, I'd turn it back down to 100 and just work with the multiplier. 1.364v seems a bit high for that frequency though. Take some screenshots while you are in the BIOS and post them if you have the time, it could just be something not set right.

 

[essenbe]

I've run CPUs for years that couldn't pass Prime, and never had a BSOD. I know that is blastphemy in an overclocking forum, but it's true. I have also passed 12 hours of Prime, 12 hours of AIDA and 20 passes of IBT on max. Put a DVD in and started Handbrake and had a BSOD within 30 seconds. So, I still use the artificial tests, but I've concluded they don't necessarially prove you are stable. So far, I've never found an application that is better for stressing a CPU than Habdbrake. And it's a real useful program and not an artificial test. That's my story and I'm sticking to it. Remember how many had problems running the ROG Real Bench? That's because it used Handbrake. I use Handbrake frequently.

 

[Britton30]

Yup I have the BCLK at 101 CPU offset +.060V. I'm trying a "-" of .020-.040 now with BCLK at 100, multiplier back to 45.

 

[essenbe]

Gary, set your CPU to manual not offset and set a 1.25 voltage with the bclk at 100 multiplier at 45 and try that. Then start moving the voltage up or down depending on your results until you find the lowest voltage you are stable at. What is your VID? Once you find the lowest voltage under prime and know the VID under Prime, the offset is fairly simple to figure out. What do you have LLC set to?

 

[kbrady1979]

Gary, set your CPU to manual not offset and set a 1.25 voltage with the bclk at 100 multiplier at 45 and try that. Then start moving the voltage up or down depending on your results until you find the lowest voltage you are stable at. What is your VID? Once you find the lowest voltage under prime and know the VID under Prime, the offset is fairly simple to figure out. What do you have LLC set to?

That's exactly, almost to the word, what I was going to say. Try that.

 

[Britton30]

It won't start, I get BSOD with 1.25V manual at 45 and 44 multiplier. I also tried 1.60V, same thing. I put it back to + offset of .030 @ 45 and it will start but Prime quits. Here is a snip with Prime running with 3 cores shut down.



I want a burger with this fry.

EDIT, LLC is set to Extreme.

 

[Dude]

Will it run 5 passes of IBT without error?

 

[essenbe]

Gary set LLC to Ultra High. See if that makes a difference. Also, read this and set your BIOS exactly like it is except the ram settings and voltage, but leave the CPU Voltage to manual and try again. Ivy Bridge Overclocking Guide ? Asus Motherboards# One problem you have is your VID is very high, which you can't change.