How to move "D" partition" to "C" partiion slot

[frtr]

How to move "D" partition" to "C" partiion slot

Hi:

I installed Win7 32 and Win7 64 on partitions "C" and "D" respectively. I have deleted Win32 and have unallocated space. I want to know if there is a way to move the "D" partition to the unallocated space and still have it bootable.

 

[Mark Phelps]

When you boot into Win64, you should see it designated as "C" -- as that is the default drive letter for the Windows native OS partition.

The bigger problem is that, if the boot loader was in the old "C" partition, it's gone now, and unless you have either a Win7 install DVD, or you made a Win7 Repair CD, you will not be able to boot Win7.

If you can't get into Win7, you can purchase a Win7 Repair CD image from the following link and make a bootable CD from it: Windows 7 Recovery Disk and Repair Disc Download

 

[frtr]

Hi Mark;

I do have the original disc. I understand the issue with the boot record. The question is more to how I can move the installed version to the old "C" partition in terms of physical HDD space. Do I just allocate the space and then copy over the image?

 

[dsperber]

Hi Mark;

I do have the original disc. I understand the issue with the boot record. The question is more to how I can move the installed version to the old "C" partition in terms of physical HDD space. Do I just allocate the space and then copy over the image?

Use MiniTool Partition Wizard, which you can install to run under Windows for ordinary partition maintenance not affecting the C-partition (i.e. the Windows partition you are booted to and operational under at the moment). The FREE version will work fine for your needs. The non-paid version has some additional functionality not required for your current request.

If you use this version to perform maintenance on C, you'll actually START the task while Windows is running but then the program will tell you it needs to re-boot in order to complete the process, which you'll reply OK to. At restart time, Partition Wizard will kick in briefly during the boot process to finish the unfinished partition maintenance, and then will revert back to Windows to complete the boot process and return you to the Desktop. All operations are now completed.

There is also a standalone boot CD version of the program. Download the ISO and burn it to CD, and then you boot to it in order to accomplish maintenance on ANY partition right then and there, including any of your bootable Windows partitions. You can do EVERYTHING right here, right now. (there's also a standalone bootable USB drive version)

So, you want to do whatever you want using the easy-to-understand intuitive GUI of this program... most conveniently in standalone boot CD mode for your particular current needs. You can do exactly what you request, namely MOVE the D partition (x64) into the deleted/unallocated space previously occupied by C (x86), now freeing up the old location's space. Or, you can enlarge/resize whatever you want, create new partition(s), etc.

Best product there is for this kind of work.

 

[SIW2]

When you boot into Win64, you should see it designated as "C" -- as that is the default drive letter for the Windows native OS partition.

Os lettering depends on a number of factors. Looks like the installation he wants to keep has letter D. That will not change even if he copies/clones it.

You can use any decent partitioning tool "copy partition function".
PW has already been mentioned. Aomei partition assistant (free) is another great free partitioner. It will make winpe boot media for you.

Free Partition Manager - AOMEI Partition Assistant Standard

 

[AddRAM]

Why did you install windows on the 2nd partition only to move it afterward ?

It would be best to reinstall windows where you want it, and format the other partition (D) as you call it

 

[dsperber]

Hi:

I installed Win7 32 and Win7 64 on partitions "C" and "D" respectively.

Please clarify...

You had two Win7 systems installed initially, clearly into two separate partitions. But if you did install each one in the standard way (i.e. booting using the Win7 installer DVDs for x86 and x64 and proceeding), then each system would install itself as C, when you actually booted to that installed version of Windows.

And there was a Boot Manager, and boot menu, that showed both versions of Windows as bootable. Yes?

Now aside from C (which Windows always assigns to the boot partition), once booted to Windows any other partitions present would then normally be lettered sequentially starting with D, E, etc. So if you booted to x86 Win7 its own partition would appear as C, and the x64 Win7 partition would appear as D. But if you instead booted to x64 Win7, then it would also appear as C with the other x86 Win7 partition appearing as D.

In other words, the C partition is the "boot partition" for the operational Windows. Any other partitions visible while still booted to that operational Windows are assigned D, E, etc. There is no actual fixed drive letter assignment to specific partitions, and in fact you can even use DISKMGMT.MSC to change the assigned drive letters for all partitions other than C, to meet your needs. In fact this drive re-lettering after-the-fact is commonly done when having multiple bootable Windows systems, to eliminate user confusion so as to have all additional partitions lettered identically no matter which Windows system you're booted to. Of course you can't re-letter the booted Windows, as it will always be C when you boot to it.

A sensible compromise (in order to avoid confusion the best possible way) if you have two bootable Windows partitions along with other partitions, is to re-letter the other Windows partition as D in both Windows system. So you'll always be booted to C no matter which Windows you boot to, and the "other" Windows will always be D no matter which Windows you boot to. And then for BOTH Windows systems, assign drive letters for any additional partitions you might have starting with E, F, etc.... IN BOTH WINDOWS SYSTEMS. That way, no matter which Windows you're booted to, all of your "data" partitions are consistently lettered E, F, etc., the booted Windows is always C, and the "other" Windows is always D. Keeps things consistent and easily navigated, no matter which Windows you are running with.


Now, back to my question. When booted to the x64 system you've retained (on that second partition), the partition itself does appear as C, right? It does not appear as D, right? It was only D when you were previously booted to the x86 system (which to itself was also C).

And if so, and if you originally had a Boot Manager running to offer you the option of choosing either of your two bootable Windows (x86 and x64) from the boot menu, how did you actually remove the unwanted x86 Windows on the first partition? What happened in the boot menu? Did you remove the entry for the deleted x86? Does booting occur properly now for the single remaining x64 system? How did the boot menu entry get removed for the now-gone x86 system? Did you use something like EasyBCD, or what??

So all you want to do is physically "slide left" that second x64 partition, to physically occupy the space formerly occupied by the x86 Windows partition. Right?

Again, my recommendation is to use Partition Wizard for this easy-to-do maintenance.

 

[gregrocker]

Before we can even begin to advise you we need to see a screenshot of Disk Management - Post a Screen Capture Image.

Tell us what is on each partition to the best of your knowledge and we will give you the steps to do what you want, just like we have for thousands of others here.

I'm assuming Win7 can boot since you don't say otherwise.

Win7 should boot as C if you installed it from boot and not the other OS. If it boots as D now then there's no way to change that. However if you want to keep it we can still help you recover the the C space into D, or move D into that space.

So let us see the screenshot so we know what we're talking about.

 

[whs]

Guys, Greg is right. Without a picture of Disk Management, we are just making hot wind. It is probably very simple to solve the problem, but me must first see how the disk looks.