BSOD while gaming, FAULT_PAGE_IN_NON_PAGED_AREA and x050 and more.

[Fuzwipper]

Hey guys, I keep getting BSOD about 3 to 5 times a day, mostly related to when I'm gaming, this usually happens when I'm playing League Of Legends or some other game like Sniper Elite V2, etc.

Editted to add that both Chrome, Skype and sometimes the AMD Catalyst Control Center will crash, although it doesn't BSOD right away, it is kind of like a signal that I will get one unless I restart.
System Specs:

Operating System
Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 2500 @ 3.30GHz 55 °C
Sandy Bridge 32nm Technology
RAM
6.00GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Motherboard
Dell Inc. 0Y2MRG (CPU 1) 47 °C
Graphics
T24B350 (1920x1080@60Hz)
3072MB ATI AMD Radeon HD 7900 Series (XFX Pine Group) 52 °C
Storage
465GB Western Digital WDC WD5000AAKX-753CA1 (SATA) 45 °C
Optical Drives

HL-DT-ST DVD+-RW GH70N

Audio
Sound Blaster X-Fi Xtreme Audio

Hope you guys can help me out!

I just updated the file with some more files.

 

[Golden]

Unfortunately the zip file doesn't contain all the necessary information to help you.

Please follow this, and don't interrupt the process until its complete:

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

 

[Fuzwipper]

Files Again

It seems like the DM Log Collector failed to collect all the times the first time, here it is.

 

[Fuzwipper]

By the way some of the files may be in Spanish, if you have any trouble I'm happy to translate.

 

[Golden]

Unfortunately there aren't any .dmp files present to analyse.

Check C:\Windows\Minidump - are there any .dmp files present there?

 

[Fuzwipper]

I tried looking for the minidump files, couldn't find any. I used Driver Verifier and indeed got BSOD but I couldn't start Windows unless it was safe mode, if I tried it sent me to a Windows Repair which rolled me back to an earlier version, leaving me without any minidump files to check. However I did use DriverScanner and many other programs to check for old drivers and files, got everything fixed and haven't got another BSOD, will keep updated. Just in case I keep getting BSOD, how do I enable the minidump file to be created? Because it seems like there is none, unless the clean up program I used deleted them, however I checked before running the cleanup and still had no .dmp files.

 

[Fuzwipper]

I have updated my post with a .dmp file I got.

 

[Golden]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff6868e908180, 0, fffff800031bc3a6, 5}


Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiGetWorkingSetInfo+286 )

Followup: MachineOwner
---------

Run a minimum of 8 passes, preferably overnight, or until errors occur using MemTest86+.

Use this tutorial to help you use MemTest86+:
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

 

[Fuzwipper]

New BSOD after formating hard drive.

Hey guys so I just rolled back my computer to fabric state, and after replacing the old AMD drivers it came with with the new ones I got this BSOD, the computer was idle downloading a game while this happened, it seems like ntoskrnl.exe is causing the issue, so I'm guessing faulty RAM, anyways I attach the files needed.

 

[Arc]

Hi Fuzwipper.

Have you followed this advice by Golden? What is the result?
___________________________________

BugCheck 3B, {c0000005, fffff80002cc0b65, fffff8800626d7c0, 0}

Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )

Followup: MachineOwner
---------

 

[Fuzwipper]

Hi Fuzwipper.

Have you followed this advice by Golden? What is the result?
___________________________________

BugCheck 3B, {c0000005, fffff80002cc0b65, fffff8800626d7c0, 0}

Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )

Followup: MachineOwner
---------

Yes just left it overnight which completed 9 passes, 0 errors and some iterations, not sure what iterations are though.

 

[Fuzwipper]

What I noticed was that whenever I stress test my CPU and GPU, my CPU goes to temps of over 80C and my GPU can go all the way to 91C in just a few minutes, could this be an overheat/thermal paste issue?

 

[Arc]

80 degrees or 91 degrees is not a high temperature for a stress test.

But if you have doubt, you may report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: http://www.sevenforums.com/tutorials/311593-speccy-publish-snapshot-your-system-specs.html .

Also, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

 

[Fuzwipper]

Here is the Speccy Snapshot link, will keep updated, so far no BSODs.

http://speccy.piriform.com/results/t3lwyQZjzxE3jdGI1qU8HaQ

 

[Arc]

The temperatures are not any high. So it may not be the source of the issue.

 

[Fuzwipper]

I just got a crash, not a BSOD though, screen went all glitchy and I had to hard reboot my computer. Attaching picture of how my screen looked like, I'm now guessing that it may be the GPU, I had it replaced 3 times (same model) because sometimes my PC would just turn off or it wouldn't even boot when I put in the new GPU. Any ideas?

 

[Arc]

I have asked our hardware experts to see this issue.

 

[Layback Bear]

Exactly what power supply do you have in your Dell system. Please include that information in your (My System Specs).

 

[Layback Bear]

I can find no information on a Umax power supply. That isn't a good sign.
I can not verify and facts on that power supply what so ever.

Their can be more than one problem with your computer but to me a starting place would be with a quality known brand name like Corsair or Seasonic. A quality power supply is the roots of a computer.

 

[ICIT2LOL]

I have found a few Googles that mention Umax PSU's but am not sure of what the model is.


I cannot find it listed here either http://whirlpool.net.au/wiki/psu_manufacturers
or the other link to all intents and purposes it must be out of production although I still find those posts for queries on those PSU's.
Most of them are asking about using a crappy Umax PSU with GPU's and scanners??


The other thing I noticed about the OP's specs is the OS ? Colima??