windows 7 won't load past windows

[ha77ison]

hi everyone
Im new to the forum, but have had a good read through lots of other threads prior to me registering.

I sem to have a problem with an ADVENT Laptop.
its a family members that they have had for 4/5 years i would say. they complained that it had become soo slow to the point it had become unusable.

i offered to clean install W7 so they could start a fresh as the laptop had become bogged down with pap to the point it was taking almost 5mins to boot up fully.
now ive done this hundreds of times on various systems in the past and thought it would be no different well now how wrong was i?!
well i have an pre activated ISO disc with all versions of W7 tried clean in stalling W7 Professional 64bit (previous was W7 Ultimate)

install went as normal until we get to the last "completing installation" stage when it froze for several hours not just going slow lol
so rebooted to continue or start again, only now all i get is a loop of getting to "windows activated setup is starting services" then reboots in a loop.

i keep getting the "windows error recovery page but no matter whether i choose safe mode etc the same happens.

could anybody help ive not been able to find an answer on the forum as i cant get a command bar to appear at all.

thanks
chris

 

[torchwood]

As its an Advent, it should have Built in recovery, directly from the boot options F8.
If not see what the F10 or F11 choices are.

Roy

 

[ha77ison]

thanks for the speedy reply roy.
i thought the same thing regarding recovery.
but upon F8 'advanced boot options' im presnted with a list as follows:-

safe mode
safe mode with networking
safe mode with command prompt
enable boot logging
enable low res video
last known good config
directory services restore mode
debugging mode
disable automatic restart on system failure
disable driver signature enforcement.

all of which i have tried and all the same end result .

 

[UsernameIssues]

~~~
well i have an pre activated ISO disc with all versions of W7 tried clean in stalling W7 Professional 64bit (previous was W7 Ultimate)
~~~

What is the source of that disc?

 

[ha77ison]

upon pressing F10 i get a command screen as follows:-

EDIT BOOT OPTIONS

edit windows boot options for: windows 7

path: \windows\system32\winload.exe

partition: 2
hard disk: 76a70902

[ /NOEXECUTE=OPTIN


i can type in the last commant line but entering anything makes no difference its just tries to start then loops again.

 

[ha77ison]

~~~
well i have an pre activated ISO disc with all versions of W7 tried clean in stalling W7 Professional 64bit (previous was W7 Ultimate)
~~~

What is the source of that disc?

it is a disk i've had for couple of years used it to clean my pc when i rebuilt it 2 years ago. i cannot remember the exact source.

 

[torchwood]

tech guys

The Tech guys are Advents (currys/PC world/Dixons) support guys, have a look on there forum, see if there are similar cases.

Roy

 

[Layback Bear]

From post #1

well i have an pre activated ISO disc with all versions of W7 tried clean in stalling W7 Professional 64bit (previous was W7 Ultimate)

What exactly is a pre activated ISO disc and where did you get such a thing?

You attempt of Clean Install with this Pre Activated ISO disk probably wipe the recovery partition if their was one.

Do you have one of these on the bottom or in the battery compartment of the laptop. What Windows 7 does it indicate the laptop came with?



Just a note:

I know exactly where I bought everyone of my Microsoft operating system starting and Windows 98 a long time ago.

Im positive I would remember a little sweet like this.

well i have an pre activated ISO disc with all versions of W7

 

[NoelDP]

There is no legal copy of Windows 7 which is 'pre-activated' - and no legal copy of Windows 7 which will install all versions.
Therefor, your disk is by definition counterfeit.