Good morning!
1. Background. I recently purchased a "Toshiba A505-S6017" laptop (Intel Core i5/4GB RAM/500GB HDD) with Windows 7, 64-bit, Premium Home edition installed: (1) I have a fully functioning home network with 4 (other) XP, 32-bit, PC nodes. (2) My router is a "Netgear Rangemax Dual Band Wireless-N Router WNDR3300." (3) My new laptop has an internal "Realtek RTL819 Wireless LAN, 302.11n b/g/n(draft) PCE-E NIC," (4) My laptop tranceiver is "Microsoft 2.4GHz, V1.0" (5) I have two wireless networks on the router, one for the 2.4, the other for the 5Ghz and can switch between the two, as desired.
2. Problem. Windows 7 found the 2.4GHz, no sweat, but does not see the 5GHz. I want 5GHz access since am worried about my 2.4GHz and mutual interference with household cordless phones, microwave, etc. which also use 2.4 -- plus, 5GHz is preferred for the speed/modernization advantages.
3. Actions to-date. I have followed Windows 7 procedures for automatic home-network detection, in many ways. I have researched (all/most?) involved OEMs' documentation, forums, and Internet-wide Google queries. I can find no solution or suggestions for the problem.
I am desperate to find a solution, as I need to set up access to my other computers from my laptop. I am considering upgrading my older PC's to Windows 7, but first need to address this issue. Can you help analyze and solve this?
Thanks so much for any consideration you can give me,
Decian
1. Background. I recently purchased a "Toshiba A505-S6017" laptop (Intel Core i5/4GB RAM/500GB HDD) with Windows 7, 64-bit, Premium Home edition installed: (1) I have a fully functioning home network with 4 (other) XP, 32-bit, PC nodes. (2) My router is a "Netgear Rangemax Dual Band Wireless-N Router WNDR3300." (3) My new laptop has an internal "Realtek RTL819 Wireless LAN, 302.11n b/g/n(draft) PCE-E NIC," (4) My laptop tranceiver is "Microsoft 2.4GHz, V1.0" (5) I have two wireless networks on the router, one for the 2.4, the other for the 5Ghz and can switch between the two, as desired.
2. Problem. Windows 7 found the 2.4GHz, no sweat, but does not see the 5GHz. I want 5GHz access since am worried about my 2.4GHz and mutual interference with household cordless phones, microwave, etc. which also use 2.4 -- plus, 5GHz is preferred for the speed/modernization advantages.
3. Actions to-date. I have followed Windows 7 procedures for automatic home-network detection, in many ways. I have researched (all/most?) involved OEMs' documentation, forums, and Internet-wide Google queries. I can find no solution or suggestions for the problem.
I am desperate to find a solution, as I need to set up access to my other computers from my laptop. I am considering upgrading my older PC's to Windows 7, but first need to address this issue. Can you help analyze and solve this?
Thanks so much for any consideration you can give me,
Decian
My Computer
At a glance
Windows 7 Home Premium, 64-bitIntel Core i54 GBIntel Graphics Media Accelerator HD w/32MB-1....
- Computer Manufacturer/Model Number
- Toshiba Satellite A505-S6017, laptop
- OS
- Windows 7 Home Premium, 64-bit
- CPU
- Intel Core i5
- Memory
- 4 GB
- Graphics Card(s)
- Intel Graphics Media Accelerator HD w/32MB-1.7GB shared mem
- Sound Card
- Dolby Sound Room
- Monitor(s) Displays
- 16"
- Hard Drives
- 500 GB
