New
#21
Yes me too I started with a small SSD until could afford a larger one to clone it to in the meantime I used a spinner to handle the extra data.
Yes me too I started with a small SSD until could afford a larger one to clone it to in the meantime I used a spinner to handle the extra data.
Well thank you all for your help, I know that upgrading the hardware will imporove performance, but dont have money for those, i just wanted to know how to make a full forma of HDD ! :)
If what you want is exactly a wiped drive then you will need a second machine running Windows with the drive you want cleaned hooked up to it.
Personally I use DISKPART > Clean it is in my opinion far better than a straight forward format and for that (format) again you will need access to a machine running Windows.
Disk - Clean and Clean All with Diskpart Command
The other machine you can hook up to using a USB to SATA adaptor or use a SATA to USB dock or just install it in that machine but in any case you must make sure that you pick the correct drive before you do the clean or format.
Hi,
I personally use this
Diskpart
List disk
Select disk n (where n is the letter that was given for your SSD in List disk)
Clean
Create partition primary align=1024
Format fs=ntfs quick
Active (assuming you want to install an OS)
Exit
SSD / HDD : Optimize for Windows Reinstallation
Yep I do the same as Thrash Zone or even just leave it as unallocated though the former is a better bet at getting it right. Having said that Windows will partition the drive if unallocated on install.
Anyway just follow the tutorial on the DISKPART and then have a look at this if I haven't mentioned it already.
Clean Install Windows 7
Hi,
Why ask why I wouldn't of posted the process if it wasn't what to do :)
Read the tutorial I posted too and read it.
Thank you evryone for your time and help , after reading this toturial Here i found how to do a fully format of HDD or what i was asking
what i did was this :
diskpart
list disk
select disk ..
clean all
create partition primary size=500 (cuz i reinstalled win 10 )
format fs=ntfs label="System Reserved"
active
create partition primary
format fs=ntfs
exit