amdk8.sys bsod after formatting hard drive

[breadwings]

This is pissing me off so much you can't even imagine. I've been getting blue screens for months, trying new solutions every day and nothing has worked, and I finally just completely formatted my hard drive (twice). My ram is fine, I do not overclock at all, and I have tried updating every one of my drivers. I switched from 64 bit to 32 bit because some people were having problems with the 9800GTX+ on 64 bit. When I play game I get Blue screens within 10 minutes EVERY TIME. I HAVE been monitoring my cpu temperature. I have turned off cool and quiet and I have tried updating my amd drivers (athlon X2 6000+) but the newest one from the site does'nt work on windows 7. I could launch debugger once to know that amdk8.sys caused one of my bluescreens, but for some reason I cannot get it to install or run again. This install of windows 7 is around 4 hours old, he hardware is less than two years old, My graphics card is 2 months old. I've been throwing things across the out of pure frustration, this is my 3rd post here. PLEASE. someone help me. Even if i can fix this one I'm sure I will get more cause by something else.

 

[Hopalong X]

breadwings

The BSOD specialists will get to you as soon as possible.

Don't feel ignored. It has been a busy day for them.

Mike

 

[breadwings]

Thanks, but i mean I've posted 3 times on seperate occasions if that's what you're referring to.

 

[Hopalong X]

I'm not refering to anything.

There are only two BSOD crew logged on that I know of.

I was attempting to let you know that it may be a bit until they get to you.
That you were not being ignored.

Everything is volunteer on this site.

I'm trying to be friendly in what I'm sure is an irritating experience with your PC.
Mike

 

[breadwings]

I'm not refering to anything.

There are only two BSOD crew logged on that I know of.

I was attempting to let you know that it may be a bit until they get to you.
That you were not being ignored.

Everything is volunteer on this site.

I'm trying to be friendly in what I'm sure is an irritating experience with your PC.
Mike

I really meant thanks , I didn't mean anything bad when i said that.
I don't care how long have to wait, as long as i have a chance at fixing this...

 

[Hopalong X]

Not a problem.
I'd be ready to get my 16lb. electronic tuning hammer out by now if it were mine also.

I now when your just waiting and there is no response from anybody it gets to be like when someone puts you on hold with bad musak.

Hang in there.
Good luck and I hope you get it all cleared up.
Mike

You might fill in your specs while waiting.
That would be helpful.

What you know at least.

 

[zigzag3143]

This is pissing me off so much you can't even imagine. I've been getting blue screens for months, trying new solutions every day and nothing has worked, and I finally just completely formatted my hard drive (twice). My ram is fine, I do not overclock at all, and I have tried updating every one of my drivers. I switched from 64 bit to 32 bit because some people were having problems with the 9800GTX+ on 64 bit. When I play game I get Blue screens within 10 minutes EVERY TIME. I HAVE been monitoring my cpu temperature. I have turned off cool and quiet and I have tried updating my amd drivers (athlon X2 6000+) but the newest one from the site does'nt work on windows 7. I could launch debugger once to know that amdk8.sys caused one of my bluescreens, but for some reason I cannot get it to install or run again. This install of windows 7 is around 4 hours old, he hardware is less than two years old, My graphics card is 2 months old. I've been throwing things across the out of pure frustration, this is my 3rd post here. PLEASE. someone help me. Even if i can fix this one I'm sure I will get more cause by something else.

Each crash has a different cause. You video driver, storport.sys, nvstor.sys, and hardware.

Here is what I would do. Since they all seem hardware related I would update the drivers.

1- video driver
When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.

2-Storport, and nvstor.sys are storage drivers and should be re-installed with the newest version from the mfr.

3-run a system file check
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html?ltr=S


Let us know the results and if you need further help

Ken J

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\New folder\101110-22625-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\symbols;*http://msdl.microsoft.com/download/symbols/;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Machine Name:
Kernel base = 0x8280f000 PsLoadedModuleList = 0x82957810
Debug session time: Mon Oct 11 20:03:11.326 2010 (GMT-4)
System Uptime: 0 days 0:23:08.435
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {8204cf58, a, 8, 8204cf58}

Unable to load image \SystemRoot\system32\DRIVERS\nvstor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvstor.sys
*** ERROR: Module load completed but symbols could not be loaded for nvstor.sys
Probably caused by : storport.sys ( storport!StorPortReadRegisterUlong+e )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 8204cf58, memory referenced
Arg2: 0000000a, IRQL
Arg3: 00000008, value 0 = read operation, 1 = write operation
Arg4: 8204cf58, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from 82977718
Unable to read MiSystemVaType memory at 82957160
 8204cf58 

CURRENT_IRQL:  a

FAULTING_IP: 
+562a952f03e1da5c
8204cf58 ??              ???

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xD1

PROCESS_NAME:  System

TRAP_FRAME:  807e0a18 -- (.trap 0xffffffff807e0a18)
ErrCode = 00000010
eax=887525e0 ebx=00000008 ecx=00000064 edx=8a9ed000 esi=8a9ed440 edi=851b3004
eip=8204cf58 esp=807e0a8c ebp=807e0a94 iopl=0         nv up ei ng nz na po nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010282
8204cf58 ??              ???
Resetting default scope

LAST_CONTROL_TRANSFER:  from 8204cf58 to 8285585b

FAILED_INSTRUCTION_ADDRESS: 
+562a952f03e1da5c
8204cf58 ??              ???

STACK_TEXT:  
807e0a18 8204cf58 badb0d00 8a9ed000 84c29740 nt!KiTrap0E+0x2cf
WARNING: Frame IP not in any known module. Following frames may be wrong.
807e0a88 887610ac 8a9ed440 807e0b58 8873558d 0x8204cf58
807e0a94 8873558d 851b3004 8a9ed440 851b3004 storport!StorPortReadRegisterUlong+0xe
807e0b58 88735642 00000005 88738c44 85186500 nvstor+0x458d
807e0b88 887409f7 851b3004 851b7b10 85186504 nvstor+0x4642
807e0bc8 887338f2 851b3004 807e0be0 8875863c nvstor+0xf9f7
807e0bd4 8875863c 851b3004 807e0bec 88758f79 nvstor+0x28f2
807e0be0 88758f79 848ca780 00000000 8284e56c storport!RaCallMiniportInterrupt+0x1b
807e0bec 8284e56c 85186500 848ca6e0 8519e470 storport!RaidpAdapterInterruptRoutine+0x26
807e0c18 8284e4b9 8519e402 000000b3 807e0d20 nt!KiChainedDispatch2ndLvl+0x60
807e0c18 8dadabb6 8519e402 000000b3 807e0d20 nt!KiChainedDispatch+0x29
807e0c98 82894795 84d6eac8 807c9800 807c4000 amdk8!C1Halt+0x4
807e0d20 8287710d 00000000 0000000e 00000000 nt!PoIdle+0x538
807e0d24 00000000 0000000e 00000000 00000000 nt!KiIdleLoop+0xd


STACK_COMMAND:  kb

FOLLOWUP_IP: 
storport!StorPortReadRegisterUlong+e
887610ac 5d              pop     ebp

SYMBOL_STACK_INDEX:  2

SYMBOL_NAME:  storport!StorPortReadRegisterUlong+e

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: storport

IMAGE_NAME:  storport.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bc736

FAILURE_BUCKET_ID:  0xD1_CODE_AV_BAD_IP_storport!StorPortReadRegisterUlong+e

BUCKET_ID:  0xD1_CODE_AV_BAD_IP_storport!StorPortReadRegisterUlong+e

Followup: MachineOwner
---------

 

[breadwings]

I cleaned out and installed my video card driver but I don't exactly know how to re-insatll storport or nvstor

 

[Hopalong X]

Breadwings

I can help searching for them but I don't know what PC you have.

No specs on motherboard etc. Brand and model number would be a good start.

 

[breadwings]

Wow. I actually feel pretty stupid. I have been monitoring tempereatures, and it turns out my specific cpu shouldnt get as hot as others I have tested. I think this may be the problem. But how do i fix it? Should cleaning out the heatsink and applying new thermal paste give take off 10+ degrees?

You can probably tell I'm not great with computers. Thanks for all of your help already.

 

[Hopalong X]

What are your temps?

Use the Snip tool to post if you want.
Mike