Solved Blue screen during swtor

[Ascendents]

Title says it all was playing and then blue screen i noticed this after the latest patch 3 weeks ago this was the second time since then

 

[Ascendents]

bump

 

[Thedoctor44]

0x124 errors are mainly caused by fatal hardware errors that have occurred.

First we should rule out that hardware isn't a problem (Unfortunately it most likely will be).

Stress test your CPU with Prime95

I recommend running Prime95 for around 2 hours

   Warning

As with most stress tests your component's temperature will rapidly increase.
It is advised that you download a temperature monitoring program like HWmonitor
Keep an eye on your temperatures and stop the tests if it starts to overheat

Stress test your graphics card with Furmark

I recommend running it for around 30 minutes

   Warning

Furmark will increase the temperature of your GPU rapidly so keep and eye on your temperatures

Memtest86 will test your RAM

   Information

Run Memtest86 for at least 8 passes so we get enough information to confirm that your RAM isn't failing

Stress test your CPU with Prime95

I recommend running Prime95 for around 2 hours

   Warning

As with most stress tests your component's temperature will rapidly increase.
It is advised that you download a temperature monitoring program like HWmonitor
Keep an eye on your temperatures and stop the tests if it starts to overheat

Stress test your graphics card with Furmark

I recommend running it for around 30 minutes

   Warning

Furmark will increase the temperature of your GPU rapidly so keep and eye on your temperatures

Memtest86 will test your RAM

   Information

Run Memtest86 for at least 8 passes so we get enough information to confirm that your RAM isn't failing

Run a Disk Check to scan for errors

   Note

Afterwards go into an Elevated Command Prompt (Run as administrator) and type in sfc /scannow
If it finds errors reboot and run the scan two more times

Run SeaTools to see if your HDD or SSD is failing

Post back the results.

Run a Disk Check to scan for errors

   Note

Afterwards go into an Elevated Command Prompt (Run as administrator) and type in sfc /scannow
If it finds errors reboot and run the scan two more times

Run SeaTools to see if your HDD or SSD is failing

Post back the results.