BSOD 0x00000101 and 0x0000009c

[Tbrown37]

I made a post a while ago that never got resolved because I couldn't retrieve the error reports from my PC. It's been a couple weeks but was finally able to get them off my PC. Could someone take a look at my thread and let me know if they can see what's causing my PC to BSOD? Perfmon/error reports are linked in the thread. Thanks for any help! :]

http://www.sevenforums.com/crashes-debugging/219481-bsod-stop-0x00000101-stop-0x0000009c.html

 

[zigzag3143]

We actually need the most current DMP files not event viewer



We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Some generic help

http://www.sevenforums.com/crash-lo..._watchdog_timeout-troubleshtg.html#post567135

 

[Tbrown37]

At current i'm not able to get it back into booting the HDDs were saying bootmgr missing and now I can get it to start windows with no logo loading up. I am going to reformat them and try re installing windows on it but I can't boot into safe mode. The most recent dmp files should be zipped up with my perfmoniter file under the windows file. Or did you look in the perfmon file and both the perfmon and other files aren't the ones you need?

 

[zigzag3143]

Please get the most recent DMPS and upload them here. It is becoming difficult to switch back and forth to look.