BSOD 0x00000101 (normally under load)

[richkempo]

Hi.

Had this rig for 6 months or less now, and have had nothing but problems. With some messing around with bios settings, I can sometimes get the system stable, but when some settings change it will go back to bsod'ing everywhere, and I can't even consider OC'ing.

As I have mentioned in the title, the BSOD normally occur when under load, but then can also occur when doing light tasks also. But ingame / loading games normally is the cause of the problem.

Finding the route of the problem might help me alot, and with help hopefully from someone here, I can either look to change my hardware or alter some settings to give me a stable system.

I have tried every recommendation that has been given to me, but nothing has proven successful yet.

Please find attached the seven folder, and I really appreciate any help offered.

Thank you.

 

[richc46]

Welcome
It is almost to give a definitive answer with only one mini dmp report. Your case is complicated by the fact that it indicated analysis inconclusive. Use the computer, when you have about 3 more bsods, send us the reports

 

[richkempo]

more bsod

Ignore the dates, that was just my system getting confused. These are all of the BSOD's I have, and each time I get a BSOD the stops codes are the same.

 

[richc46]

Yes,
All the codes are the same 101 and this is what I see when I look at the reports

 Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Richard\AppData\Local\Temp\Temp1_bsod.zip\bsod\080712-8689-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02e4f000 PsLoadedModuleList = 0xfffff800`03093670
Debug session time: Tue Aug  7 15:10:31.235 2012 (GMT-4)
System Uptime: 0 days 0:12:46.870
Loading Kernel Symbols
...............................................................
................................................................
.......................
Loading User Symbols
Loading unloaded module list
...........
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 101, {19, 0, fffff88002f65180, 2}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Followup: MachineOwner
---------

 

[richkempo]

Is there anyway I can make more information get recorded in a report?

 

[richc46]

We cant change the reports, but we can do some testing, if you are interested.

 

[richkempo]

Yea, testing sounds good. What is needed to be done?

 

[richc46]

If your BSODs happen often on a regular basis, run a bit in Safe Mode and see if it happens.
If you cannot run safe mode long enough to know if you get a bsod, run in clean boot.
http://www.sevenforums.com/tutorial...ation-conflicts-performing-clean-startup.html
Also, when you boot hear any beeps?

 

[richkempo]

Safe mode doesnt allow me to play games, so I am unable to cause a BSOD. When I do selective startup, I start the computer with the minimum running and only run a game, and within 10 seconds I got a BSOD. I don't get any beeps or red lights when booting the computer.

 

[richc46]

OK, we do have some information. Not as clear as if the test were with safe mode, but lets think in terms of hardware.
Take a memory test.
Run for 8 passes.
Then test each stick in a good slot for 6 passes.
If you have dual channel, the results may be incorrect, if shows pass.
Guide to using Memtest86+ - Geeks to Go Forums
Memory is often the problem when the BSOD happens under stress

 

[richkempo]

memtest86

Ok, I left my PC on over night and managed to do the 8 passes on while both sticks were in, then I did 6 passes on each stick (tried each stick in a different slot). No errors came up. I then tried running a game whilst using only one stick of ram, again in different slots, and the pc still BSOD like normal.
I noticed on the memtest that when it was testing, it showed 800hz, and a 6-6-6-20 timing, when my memory is 1600 9-9-9-24. I also have a 64 bit system, but the program shows x86. Is this all normal?
Thanks for the help.

 

[richc46]

If you are not dual channel (often gives false negative) I would say that you are ok.
If you have the problem unders stress, its probably due to excessive demand on the computer. Memory is often the cause, but not always. Lets try a general stress test. Remember, we are just using educated guesses, at this point, because of your inconclusive reports.
Prime95

 

[richkempo]

Running Prime95 now.

Also, I wrote the stop codes down if they are of any help. Its the clock interupt on the secondary processor not receiving within the allocated time interval. The stop code is: 0x00000101 (0x0000000000000019, 0x0000000000000000, 0xFFFFF88002F65180, 0x0000000000000002)

Thanks for the help

 

[richc46]

101 tells us may be hardware, we know that already.
Usual causes: Device driver, BIOS bug, hardware defect

 

[richkempo]

After having the same bsod through what must be over 10 complete formats and reinstalls of windows, would this point towards a possible hardware issue?

 

[richc46]

Yes, that is why I am giving you tests for hardware.
I feel that it is hardware (memory is considered hardware) and the tests so far is to try to discover precisely the cause.

 

[richkempo]

Ok. Well I will keep you posted on the Prime95 in six or so hours. I have a spare sound card and would it be worth putting this in an running my sound off of that, and disabling the onboard sound ?

 

[richc46]

I'd wait a bit on that one.

 

[richkempo]

Should I choose the options in Prime95 that are less RAM orientated, as I have already tested the RAM with memtest86?

 

[richc46]

Yes, that would probably be best.