Hi 19delta,
Welcome to the 7forums.
The errors are 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
This means that there are problems with your hardware, but this error is also caused by overclocking or faulty drivers.
The problem is an internal error with the cache while executing an instruction.
Please make sure your hardware drivers are up to date.
Please follow the instructions below, this could be caused by many things unfortunately.
Code:
2: kd> !errrec fffffa8007b94028
===============================================================================
Common Platform Error Record @ fffffa8007b94028
-------------------------------------------------------------------------------
Record Id : 01d1026402415427
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 10/9/2015 14:18:48 (UTC)
Flags : 0x00000000
===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa8007b940a8
Section @ fffffa8007b94180
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal
Proc. Type : x86/x64
Instr. Set : x64
[COLOR="red"]Error Type : Cache error[/COLOR]
[COLOR="Red"]Operation : Instruction Execute[/COLOR]
Flags : 0x00
Level : 3
CPU Version : 0x0000000000600f20
Processor ID : 0x0000000000000002
===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa8007b940f0
Section @ fffffa8007b94240
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal
Local APIC Id : 0x0000000000000002
CPU Id : 20 0f 60 00 00 08 08 02 - 0b 32 98 3e ff fb 8b 17
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
Proc. Info 0 @ fffffa8007b94240
===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa8007b94138
Section @ fffffa8007b942c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
[COLOR="Red"]Error : ICACHELG_IRD_ERR (Proc 2 Bank 1)[/COLOR]
Status : 0xb600000000100153
Address : 0x0000000000000007
Misc. : 0x0000000000000000
STOP 0x124 Troubleshooting
Read carefully before proceeding.
Warning
If you're overclocking your system, revert back to stock clocks now.
Note
Test the system once the overclock is removed before continuing with the steps outlined below.
Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test
Run Prime95 to stress test your CPU.
Prime95 - Stress Test Your CPU - Windows 7 Help Forums
Warning
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Run MemTest86+ to analyse your RAM.
MemTest86+ - Test RAM - Windows 7 Help Forums
Note
MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Run SeaTools to check the integrity of your HDD.
SeaTools - HDD test - Windows 7 Help Forums
Note
Do not run SeaTools on an SSD as the results will be invalid.
Run chkdsk
Chkdsk - HDD Test - Windows 7 Help Forums
Run Furmark to stress test your GPU.
FurMark - GPU Stress Test - Windows 7 Help Forums
Note
Run Furmark for around 30 minutes.
Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.