Solved BSOD 1e

[Adafaka]

Here you go :

 

[Arc]

It indicated BAD RAM. Either you replace the entire kit or determine which Module is bad by following the part 3 of the tutorial How to Test and Diagnose RAM Issues with Memtest86+ and change that module.

Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
Stop testing a particular RAM stick as and when you get the first red line.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:

test|Slot1|Slot2
RAM1| Error | Error
RAM2|Good|Good

It is a RAM, a bad RAM.

But if you have got a result like that:

test|Slot1|Slot2
RAM1| Error |Good
RAM2| Error |Good

It is a motherboard issue. The particular slot is bad.

 

[Adafaka]

Should i stop the scan now that we know whats the problem??

 

[Arc]

If you dont want to determine which stick is faulty, change all the RAM sticks then.

 

[Adafaka]

It's on the 6-th pass, how many passes should i wait and how will i know which stick is faulty?

 

[Arc]

It's on the 6-th pass, how many passes should i wait and how will i know which stick is faulty?

Described in post #22 above.

 

[Adafaka]

I will have to do that for days it will take a week, i'd better buy a new set of ram sticks

 

[Arc]

No problem. You may go for that.

I wish it is not, but if it is a failing slot, that will remain undetermined in that case.

Anyway, best of luck. Let us know how the computer is running with the replacement RAM sticks.

 

[Adafaka]

I have only one mem stick, so i tried to put it in another slot but i still got a bsod.
So tomorrow i will go to the service and get a new one.
Hope that will fix my problem

 

[Arc]

Let us know the situation

 

[Adafaka]

Okay so i got a new mem stick and i still get the bsod, what should i do now?

 

[Arc]

Memtest on that new RAM module too, in all slots, one by one.

 

[Adafaka]

Now i ran the memtest86+ and so far i haven't gotten any red lines.
So i guess the mem stick is good but the windows os is infected.
Any further instructions?

 

[Arc]

Have you tested it in all the slots? For how many passes?

EDIT: The photo shows that the test is on zero pass right now.

Sorry to say, but there is no "fix" button for a BSOD.

EDIT AGAIN: I have asked others to guide you. I cannot provide the help that you are searching for.

 

[Britton30]

I just ran the memtest, it did 2 passes and it said that "hardware programs were found" and to contact the computer manufacture.And after the 2 passes it booted the pc to normal mode and a bsod appeared really fast and now i'm in safe mode. What now?

Memtest86+ does not do that nor give messages. What did you run? Memtest need to run at least a full 8 passes and will take some hours. There is no quick fix and it has to be tracked down.

If you're infected maybe a clean install is in order?
http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html#post16008

 

[Adafaka]

Hi, i canceled the memtest and somehow the automatic fix startup appeared and i selected that, then i selected the startup repair so i let it run for like 5 minutes and after that it asked for a reboot and it said that it fixed the problems.
So i restarted and no bsod appeared and i'm posting from the computer that has/had the problem now.
And now i did the command sfc /scannow in cmd and it also fixed some problems. And now it asks for a restart
I will restart my pc and post if i still get bsod.
If i don't get a bsod for a week i will mark this tread as solved
Thank you for your assistance.

 

[Britton30]

Reboot and run the sfc again to check all corrupt files have indeed been fixed.

 

[ICIT2LOL]

Yes mate and in addition a chkdsk would not go amiss either http://www.sevenforums.com/tutorials/433-disk-check.html

 

[Adafaka]

I did the sfc /scannow command again and the same message appeared - in the picture below
And i did the disk check, but i didn't see the results - because i was watching TV
But however i took these snapshots - below..

 

[ICIT2LOL]

Ok mate try this and see what comes up Finding Event Viewer & Viewing Chkdsk Results