Solved BSOD 1e

[Adafaka]

Hello. Can someone please help me??
I have windows 7 ultimate, before that i had windows 8, and before the w8 i had windows 7
On the old windows 7 i also had bsod and i posted a tread here.
A guy helped me and we found that the issue was my usb for wireless internet.
So i bought a cable and connected the pc and i upgraded my windows to 8.
And i didn't have any problems.
And after 4-5 months i got bored of windows 8 and i switched back to 7.
So i have it about 3 weeks and today i got a bsod.
It was fast i didn't read all the information and my pc restarted.
Now i got this box "Windows has recovered from an unexpected shutdown
And this error messages ::

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1071

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\052613-22526-01.dmp
C:\Users\Darko\AppData\Local\Temp\WER-64740-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

And two more things :
-I have one driver that is not installed called "PCI Simple Communications Controller" in device manage.
Could that be the problem??
-I tried to uninstall SPTD, the uninstall button is grayed out, and i don't have deamon or alchoholic tools.

Thank you in advanced!
-Sincerely Adafaka xD

 

[Arc]

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

 

[Adafaka]

Here you go:

and one more thing today i got the blue screen and restarted my pc and then it tooked 6 seconds to show to blue screen again and over and over.
So i went to safe mode with networking and i still get the bsod.
And then i went to safe mode and didn't get it.
And returned to normal mode and didn't get it.

Thanks for the help in advanced

 

[Arc]

The BSOD is caused by avast! File System Minifilter Driver.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa8300c13b7a, 2, 0, fffff80002e94d67}

*** WARNING: Unable to verify timestamp for [URL="http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys"]aswMonFlt.sys[/URL]
*** ERROR: Module load completed but symbols could not be loaded for[URL="http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys"] aswMonFlt.sys[/URL]
Probably caused by : [URL="http://www.carrona.org/drivers/driver.php?id=aswMonFlt.sys"]aswMonFlt.sys [/URL]( aswMonFlt+6e9b )

Followup: MachineOwner
---------

Description here: Driver Reference Table - aswMonFlt.sys

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.

1. Click on the Start button
2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
3. Select the “Startup” tab.
4. Deselect all items other than the antivirus.
5. Apply > OK
6. Accept then restart.

Let us know the results.

 

[Adafaka]

I did all the things you told me to do.
I uninstalled avast! and installed security essentials and malwarebytes
I disabled all the things in startup except the audio drivers
Thanks for the help !
I will mark this tread as solved if i don't get another bsod in 4 days..

 

[Adafaka]

Hello today i got a new bsod here are the files from the tool

 

[Arc]

Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

If memtest and furmark comes free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

 

[Adafaka]

Hello i will do the memtest tonight, i can't do the FurMark thing because it says : "
Could not initalize ZoomGPU. FurMark Startup failed. Bye!"
And now i downloaded a program called "blue screen view" and it says that the problem are:
-ntoskrnl.exe
-VIDEOPRT.SYS
I tried to find solutions for them on youtube and other sites but i could not.
I would be happy if you could tell me solutions for those files

 

[Arc]

Done the memtest? What is the result?

You may try an older version of Furmark. Get it from FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net

BSView is an inferior tool. Better you dont run behind the drivers it pointed out. One is the system kernel and the other one is a system driver.

 

[Adafaka]

I did the FurMark test for like 15 mins. My minimum temperature was 45 and the maximum 60. I stopped the test when my temperature was 60 degrees for 5 min.
And i will do the memtest TONIGHT.

 

[Adafaka]

I just ran the memtest, it did 2 passes and it said that "hardware programs were found" and to contact the computer manufacture.And after the 2 passes it booted the pc to normal mode and a bsod appeared really fast and now i'm in safe mode. What now?

 

[Arc]

After two passes it booted to normal mode at its own?

Was there any red line on the screen during memtest?

 

[Adafaka]

Yes it booted on its own
And No there wasn't

 

[Arc]

Run it again?

It should continue till you are not stopping it manually.

 

[Adafaka]

i ran it again and this is what i got now::
==============================================================================
Windows error Recovery

Windows failed to start. A recent hardware or software change might be the cause.

If windows files have been damaged or configured incorrectly, startup repair can help diagnose and fix the problem. If power was interrupet during startup choose start windows normally.
(Use the arrow keys to highlight your choice.)

Launch Startup Repair (recommended)
Start Windows Normally

===========================================================================================

What should i choose now??

 

[Adafaka]

Okay so i could not wait any more, and i run the startup repair and now its "attempting repairs"

 

[Arc]

How are you running memtest? It should not give you this message, as it runs from outside of windows.

 

[Adafaka]

Ok i finally ran the memtest, before i started something else

 

[Adafaka]

It's 23% and 5 lines appeared is that good or bad ??

 

[Arc]

5 lines in red? Take a camera snap and upload it.