BSOD after clean install error 0x0000007E

[Renoux]

Hi guys.

I am very desperate.

I get a BSOD right after a clean install and after the OS boots into itself and configurates.

The exact error is as below attachment.

I cant find a fix on the internet.

Have used both DVD and USB installs, Same error. Swapped RAM modules, removed one and just used one. I dont know what else to try.

Thank you in advance.

 

[axe0]

   Note

You could use the Win10PE preinstalled software to perform HDTune tests

Diagnostics Test

 HDD TEST

   Note

Please run HDTune first, in the order posted!

Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Make a photo of the result and post it.

Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log :ar: Check Disk (chkdsk) - Read Event Viewer Log

 

[Azorian81]

Hello There, solved in a laptop from asus model x540s

on my case this computer comes with windows 10, but my client wanted the good old SEVEN os

next is how i solved it ( Assuming that you did all the previous of making the partition from GPT to MBR )

- Press F8 while booting,
- it will show an advanced menu for windows 7 boot,
- boot in safe mode.
- if the blue screen of death (BSOD) comes after the system tried to load the file "disk.sys" just do the next step and it should load
- There is a setting in BIOS called I/O Security and in there was Card Reader Interface. I switched from Unlock to Lock and to my amazement, no BSOD!!