BSOD after going to sleep, driver power state failure

[kokois]

I've started getting driver power state failures BSODs after my computer goes to sleep.

These started in the last couple of weeks. It's happened twice today already. When I first noticed these occurring, I used System Restore to undo my last installs, but it didn't help.

I'd greatly appreciate any help fixing this.

 

[koolkat77]

Welcome

Your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC is causing BSoD
Update to latest drivers

>[ 16, 2]   0 e1 fffffa8005c3a050 00000000 fffff800032d5200-fffffa8007049c50 Success Error Cancel pending
	      Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
 \Driver\RTL8167	nt!PopSystemIrpCompletion
			Args: 00014400 00000000 00000004 00000002
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa8007049c50    

			Args: 00000000 00000000 00000000 00000000
0: kd> lmvm Rt64win7
start             end                 module name
fffff880`06d15000 fffff880`06d7f000   Rt64win7 T (no symbols)           
    Loaded symbol image file: Rt64win7.sys
    Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
    Image name:[COLOR="red"] Rt64win7.sys[/COLOR]
    Timestamp:        [COLOR="Red"]Wed Jan 26 19:34:03 2011 [/COLOR](4D4022CB)
    CheckSum:         0006AFBB
    ImageSize:        0006A000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Source | Driver Reference Table

Also Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

→ http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
→ Guide to using Memtest86+ - Geeks to Go Forums

 

[kokois]

Thanks for taking the time to reply.
I tried removing that driver entirely but had another BSOD today; attached another zip of minidumps.

I haven't tried the memtest yet but will hunt down a usb stick and try that next.

 

[koolkat77]

The last dump is of 09-25-2012

 

[kokois]

Sorry about that, zipped the wrong folder. Attached another.

 

[koolkat77]

Caused by older drivers of your Intel® Wireless WiFi Link Adapter
Look for a possible driver update

Product: Intel® Wireless WiFi Link Adapter
Company: Intel Corporation
Description: Intel® Wireless WiFi Link Driver

netwns64.sys - What is netwns64.sys ?

[FONT="Verdana"]>[ 16, 2]   0  0 fffffa8005970050 00000000 00000000-00000000    
	      Unable to load image \SystemRoot\system32\DRIVERS\[COLOR="Red"]NETwNs64.sys[/COLOR], Win32 error 0n2
*** WARNING: Unable to verify timestamp for [COLOR="red"]NETwNs64.sys[/COLOR]
*** ERROR: Module load completed but symbols could not be loaded for [COLOR="red"]NETwNs64.sys[/COLOR]
 \Driver\NETwNs64
			Args: 00014400 00000000 00000004 00000002
 [ 16, 2]   0 e1 fffffa8005241e20 00000000 fffff800032c5200-fffffa8004d614c0 Success Error Cancel pending
	       \Driver\vwifibus	nt!PopSystemIrpCompletion
			Args: 00014400 00000000 00000004 00000002
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa8004d614c0    

			Args: 00000000 00000000 00000000 00000000
0: kd> lmvm  NETwNs64
start             end                 module name
fffff880`0647c000 fffff880`06ce7000   NETwNs64 T (no symbols)           
    Loaded symbol image file: NETwNs64.sys
    Image path: \SystemRoot\system32\DRIVERS\NETwNs64.sys
    Image name: [COLOR="red"]NETwNs64.sys[/COLOR]
    Timestamp:        [COLOR="red"]Tue Nov 09 17:16:31 2010[/COLOR] (4CD92D8F)
    CheckSum:         0082008A
    ImageSize:        0086B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4[/FONT]

 

[kokois]

I went to Intel's website to update drivers, but I'm still having BSODs, almost every time I put my laptop to sleep now.

I also ran memtest overnight and didn't get any errors.

Attached another minidump.

 

[koolkat77]

Is this a new laptop? Is it under its warranty?

Is anything connected to your usb ports? Try removing those and putting the computer to sleep, see if it still BSODs

BTW, update drivers for the following:

0: kd> !irp fffffa80053f8c10
Irp is active with 4 stacks 3 is current (= 0xfffffa80053f8d70)
 No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  
     cmd  flg cl Device   File     Completion-Context
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
>[ 16, 2]   0 e1 fffffa8005dda800 00000000 fffff800030c6ce0-fffffa8004b6c9d0 Success Error Cancel pending
	       \Driver\RimVSerPort	nt!IopUnloadSafeCompletion
			Args: 00015500 00000001 00000004 00000003
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa80083bac80    

			Args: 00000000 00000000 00000000 00000000
0: kd> lmvm RimSerial_AMD64
start             end                 module name
fffff880`0535e000 fffff880`05370000   RimSerial_AMD64 T (no symbols)           
    Loaded symbol image file: RimSerial_AMD64.sys
    Image path: \SystemRoot\system32\DRIVERS\RimSerial_AMD64.sys
    Image name: [COLOR="Red"]RimSerial_AMD64.sys[/COLOR]
    Timestamp:        [COLOR="red"]Thu Jul 07 05:20:01 2011 (4E14EDA1)[/COLOR]
    CheckSum:         00012814
    ImageSize:        00012000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

RimSerial

0: kd> !irp fffffa8005855e10
Irp is active with 3 stacks 2 is current (= 0xfffffa8005855f28)
 No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  
     cmd  flg cl Device   File     Completion-Context
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
>[ 16, 2]   0 e1 fffffa8006bcd050 00000000 fffff80003318200-fffffa8007b6e820 Success Error Cancel pending
	      *** WARNING: Unable to verify timestamp for bpmp.sys
*** ERROR: Module load completed but symbols could not be loaded for bpmp.sys
 \Driver\bpmp	nt!PopSystemIrpCompletion
			Args: 00014400 00000000 00000004 00000002
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa8007b6e820    

			Args: 00000000 00000000 00000000 00000000
0: kd> lmvm bpmp
start             end                 module name
fffff880`08738000 fffff880`08769000   bpmp     T (no symbols)           
    Loaded symbol image file: bpmp.sys
    Image path: \SystemRoot\system32\DRIVERS\bpmp.sys
    Image name: [COLOR="Red"]bpmp.sys[/COLOR]
    Timestamp:        [COLOR="red"]Thu Nov 18 21:11:34 2010[/COLOR] (4CE54226)
    CheckSum:         0002EFE0
    ImageSize:        00031000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Source
Also enable USB selective suspense if its not enabled:

• http://www.sevenforums.com/tutorials/147369-usb-selective-suspend-turn-off.html

Also update your graphic card drivers to their latest:
Click on the Start rb: ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to ATI -> Reboot -> now delete remnants of driver using Driver Sweeper

BugCheck 116, {fffffa800461c2d0, fffff88003b3e2ec, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+72ec )

Followup: MachineOwner
---------

3: kd> lmvm atikmpag
start             end                 module name
fffff880`03b37000 fffff880`03b84000   atikmpag T (no symbols)           
    Loaded symbol image file: atikmpag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
    Image name: [COLOR="orange"]atikmpag.sys[/COLOR]
    Timestamp:        [COLOR="Orange"]Thu Jan 06 23:01:00 2011[/COLOR] (4D25F54C)
    CheckSum:         000578CE
    ImageSize:        0004D000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

 

[kokois]

It's a year and a half old and no longer under warranty, unfortunately.

RIMSerial - I removed this driver as I usually don't connect to my blackberry much anyway
bpms.sys - updated through intel
ATI drivers - I removed and updated through Sony

I did try removing my mouse and fan from the USB hubs, but still crashed when going to sleep.

 

[koolkat77]

The last dump is of 10.27.12

Anyway, enable driver verifier. It needs to be enabled for 24 hours or more. Continue to use your laptop the way you usually do and give me all the .dmp files you get with it enabled. give me the new .dmps only.

• http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

 

[kokois]

My computer continues to BSOD on going to sleep, but does not produce a minidump file. The last minidump in the folder is from 10/27. I checked the Startup and Recovery options, and it is set to make a new minidump, so I'm not sure why it isn't.

 

[koolkat77]

Did you try enabling/disabling USB selective suspense and see if it helped?